Skip to main content
WaterVerge

Water quality report · updated Jul 2026

Is Millersview, TX Tap Water Safe to Drink?

Graded F — but Lead and NDMA were detected above EPA limits. Here's what's in the water and how to remove it. What to do ↓

2 contaminants over a legal limit
17.3 ppb lead, 90th percentile
65 unresolved violations
4K people served by 1 water system

PWSID TX0480015 · high data confidence · local government utility

Reviewed by WaterVerge Editorial Team · Last updated July 2026
F 31.1 / 100

#1062 of 1067Texas cities
How we grade →

01The verdict: is Millersview water safe?

Millersview's drinking water has significant quality concerns based on EPA testing data. With a grade of F (31.1/100), the system has issues across multiple categories. A water filter is recommended for all residents. The city's 1 water system serves approximately 3,987 residents using surface water (rivers, lakes, or reservoirs).

The concern

Lead is over its legal limit

Measured at 17.3 ppb against the EPA Action Level of 15 ppb. The ledger below shows how far over — and which filter removes it.

See the measurement ↓
Context

4K people, 1 system

All figures on this page come from federal EPA compliance and testing data for the systems serving this city.

See the systems ↓
Keep watching

lithium is approaching its limit

Measured at 184.0000 µg/L — 120% of the 0.004 µg/L limit. Within the rules, but with less headroom than you'd want.

See the ledger ↓

Millersview's drinking water received a grade of F (31.1 out of 100), indicating failing water quality. The city's 1 water system serves approximately 3,987 residents using surface water.

Lead levels were measured at 17.3 ppb (90th percentile), which exceeds the EPA action level of 15 ppb. UCMR 5 testing detected 5 PFAS compounds in the water supply. The system has 313 violations on record, including 247 health-based violations. 65 remain unresolved.

Millersview ranks #1062 out of 1067 cities in Texas for water quality, placing it among the lowest-rated in the state. The city draws from surface water sources, which are more susceptible to seasonal runoff and agricultural contamination, requiring extensive multi-barrier treatment including coagulation, filtration, and disinfection. PFAS compounds were detected in testing, though levels remain within current EPA limits. Residents seeking extra precaution may consider an activated carbon or reverse osmosis filter. Lead levels exceed the EPA action level of 15 ppb, which typically indicates aging lead service lines or lead solder in the distribution system. An NSF 53-certified filter is strongly recommended for drinking and cooking water. The system has seen 82 violations in the past five years, suggesting a pattern of compliance challenges that residents should monitor closely.

How the 31.1/100 breaks down Methodology →
ViolationsHistorical violation record including health-based and monitoring violations.
0 / 45F
Lead & CopperLead at 17.3 ppb (90th percentile).
6 / 20F
Contaminants5 PFAS compounds detected.
16.1 / 20B
ComplianceMonitoring and reporting compliance with EPA regulations.
5 / 10D
Source RiskWater source: Surface water.
4 / 5B

02What's in Millersview's water

Every contaminant flagged in Millersview, on one shared scale: distance to its own legal limit. The red line is the limit — anything past it is out of compliance, and the closer a bar gets, the less headroom the system has.

4 detections · sorted by % of legal limit
Over the limit Elevated — watch Within limits
0 50% LEGAL LIMIT 150%
lithium PFAS / Forever Chemical
184.0000 µg/L 120% of limit
NDMA (N-Nitrosodimethylamine) Disinfection Byproduct
18.2 ng/L 120% of limit
Lithium Inorganic
184.0 µg/L 120% of limit
33 contaminants tested under EPA SDWIS, LCR and UCMR programs · 8 detected Contaminants without a federal MCL are shown against the strictest state or advisory level named in each row.

Full contaminants report

Contaminant Detected Level EPA Limit Unit Category Status
Lead (90th percentile) 17.3 15 ppb Inorganic Over Limit
11Cl-PF3OUdS ND HI µg/L PFAS Not Detected
4:2 FTS ND HI µg/L PFAS Not Detected
6:2 FTS 0.006 HI µg/L PFAS Detected
8:2 FTS ND HI µg/L PFAS Not Detected
9Cl-PF3ONS ND HI µg/L PFAS Not Detected
ADONA ND HI µg/L PFAS Not Detected
HFPO-DA ND 0.01 µg/L PFAS Not Detected
lithium 184.000 HI µg/L PFAS Detected
NEtFOSAA ND HI µg/L PFAS Not Detected
NFDHA ND HI µg/L PFAS Not Detected
NMeFOSAA ND HI µg/L PFAS Not Detected
PFBA 0.006 HI µg/L PFAS Detected
PFBS 0.004 HI µg/L PFAS Detected
PFDA ND HI µg/L PFAS Not Detected
PFDoA ND HI µg/L PFAS Not Detected
PFEESA ND HI µg/L PFAS Not Detected
PFHpA ND HI µg/L PFAS Not Detected
PFHpS ND HI µg/L PFAS Not Detected
PFHxA ND HI µg/L PFAS Not Detected
PFHxS 0.004 HI µg/L PFAS Detected
PFMBA ND HI µg/L PFAS Not Detected
PFMPA ND HI µg/L PFAS Not Detected
PFNA ND HI µg/L PFAS Not Detected
PFOA ND 0.004 µg/L PFAS Not Detected
PFOS ND 0.004 µg/L PFAS Not Detected
PFPeA ND HI µg/L PFAS Not Detected
PFPeS ND HI µg/L PFAS Not Detected
PFTA ND HI µg/L PFAS Not Detected
PFTrDA ND HI µg/L PFAS Not Detected
PFUnA ND HI µg/L PFAS Not Detected
Data source: EPA SDWIS, UCMR 5, local utility CCR.

03Millersview's ten-year track record

Each box is one year. A green check means no EPA violations; a numbered badge counts that year's violations — red if any were health-based, amber if they were monitoring or paperwork issues. The system has 313 violations on record, including 247 health-based violations. 65 remain unresolved.

1 of the last ten years was clean. The numbered years had EPA violations — red when any were health-based, amber when they were paperwork or missed-testing issues.

119 health-based in 10 yrs 46 monitoring & paperwork 47 still unresolved
PFAS5 PFAS "forever chemical" compounds detectedDetected at levels within current EPA limits. PFAS persist indefinitely in the environment.
UpdateWater quality data updatedLatest EPA compliance and testing data incorporated into Millersview's water quality assessment. Grade: F (31.1/100).
Violation2 drinking water violations recorded2 health-based. Contaminants: TTHM, Total Haloacetic Acids (HAA5).Resolved
DisasterSEVERE STORMS, STRAIGHT-LINE WINDS, AND FLOODINGFederal disaster declaration (FEMA DR-4879). Flood event — may have impacted local water infrastructure.
Violation3 drinking water violations recorded2 health-based. Contaminants: TTHM, Total Haloacetic Acids (HAA5), Lead and Copper Rule.Open
Violation3 drinking water violations recorded3 health-based. Contaminants: Lead and Copper Rule, TTHM, Total Haloacetic Acids (HAA5).Open
Lead, 90th percentileppb · lower is better
010203040EPA action level · 15 ppb1993 — 3.9 ppb1994 — 1.4 ppb1995 — 1.7 ppb1996 — 2 ppb1999 — 4.8 ppb2007 — 8.5 ppb2010 — 2.3 ppb2013 — 3.5 ppb2016 — 3.9 ppb2017 — 3.7 ppb2020 — 13 ppb2021 — 15 ppb2022 — 15 ppb2023 — 15 ppb2024 — 34 ppb2025 — 17 ppb3.91719931999201620222025

Up 13 ppb since 1993. The latest reading (17 ppb, 2025) is over the action level. Sampled at higher-risk homes (90th percentile).

04Where Millersview's water comes from

Millersview's drinking water comes primarily from surface water sources such as rivers, lakes, or reservoirs.

Source

Surface Water

Rivers, lakes, or reservoirs — more exposed to runoff, agriculture, and seasonal swings than groundwater.

Treatment

Local treatment

Multi-barrier treatment: coagulation, sedimentation, filtration, and disinfection to meet EPA standards.

Distribution

1 system

1 water system, operated under local government ownership.

Delivery

3,987 people

Residents served across Millersview's service area.

Surface water systems require multi-stage treatment including coagulation, sedimentation, filtration, and disinfection to meet EPA Safe Drinking Water Act standards. These sources can be impacted by seasonal changes, stormwater runoff, upstream agriculture, and industrial discharge. The system is operated by local government ownership and serves approximately 3,987 people through 1 water system.

System namePWSIDPopulationSource
MILLERSVIEW DOOLE WSC TX0480015 3,987 Surface Water

Water bodies near Millersview

O. H. Ivie Res Nr Voss · lake

As a surface-water system, these water bodies may directly influence Millersview's drinking water supply.

05Pressure on Millersview's watershed

Outside forces that shape what reaches the treatment plant. None of these is a verdict on the tap by itself — but each adds pressure worth knowing about.

Flood & storm history

Recurring — declared disasters

3 federal disaster declarations on record for Concho County. Flooding and severe storms can overwhelm treatment plants, cause sewage overflows, and push runoff into supplies.

SEVERE STORMS, STRAIGHT-LINE WINDS, AND FLOODING Jul 2025 · DR-4879
SEVERE STORMS, STRAIGHT-LINE WINDS, TORNADOES, AND FLOODING May 2024 · DR-4781
HURRICANE RITA Sep 2005 · DR-1606

06How Millersview compares

Scores for nearby Texas cities on one line, with the average marked.

Dallas
36.2 · F
Fort Worth
34.5 · F
San Antonio
33.1 · F
Austin
31.2 · F
Millersview (this city)
31.1 · F
Houston
27.8 · F

dashed line = Texas average (46/100)

Millersview scores 31.1/100below the Texas average of 46/100. It outscores 1 of 10 nearby cities. Full Texas rankings →

Concho water quality rankings
Compare all cities in the county — grades, violations, and contaminant data side by side.

07What to do at home

Steps matched to what testing actually found in Millersview's water — not generic advice.

Because of lead

Filter drinking & cooking water

NSF 53-certified pitcher or under-sink filter. Lead level (17.3 ppb) exceeds the EPA action level of 15 ppb

Compare tested filters →
Because lead was detected

Flush taps & check your service line

Lead leaches from pipes as water sits. Run cold water 30 seconds before drinking (especially mornings), and ask the utility whether your address still has a lead service line.

Lead risks explained →
Stay informed

Watch for Millersview alerts

This area has a history of flood declarations — after severe weather, watch for boil-water advisories from the utility, and check the live alerts on this page.

All water alerts →

Frequently asked questions

Is Millersview, TX tap water safe to drink?

Millersview's water quality earned a grade of F (31.1/100). Significant issues have been found. A water filter is strongly recommended. The city ranks #1062 out of 1067 cities tested in Texas.

What contaminants are in Millersview's water?

Lead was measured at 17.3 ppb (90th percentile). 5 PFAS compounds were detected. 313 violations are on record.

How is Millersview's water quality grade calculated?

The grade is based on four factors: violation history (40%), lead and copper levels (25%), PFAS contamination (25%), and regulatory compliance (10%). The score is also adjusted based on how complete the available data is. See our methodology page for full details.

Do I need a water filter in Millersview?

Yes — lead levels exceed the EPA action level of 15 ppb. We recommend an NSF 53-certified filter or reverse osmosis system. PFAS compounds have been detected. A filter with activated carbon can help reduce exposure.

Where does Millersview's water come from?

Millersview's water is sourced from Surface water. The city has 1 water system serving approximately 3,987 residents.

What health violations has Millersview's water system had?

Millersview has 247 health-based violations on record. The most recent violation was recorded in October 2025. Health-based violations mean the water exceeded EPA maximum contaminant levels (MCLs) for a regulated substance. 65 violations remain unresolved.

Why does Millersview have so many PFAS compounds in its water?

5 different PFAS "forever chemical" compounds were detected in Millersview's water supply during UCMR 5 testing. PFAS contamination often originates from proximity to military installations (AFFF firefighting foam), airports, industrial manufacturing sites, or wastewater treatment facilities. While detected, current levels are within EPA limits. An activated carbon filter can further reduce exposure.

How does Millersview's water compare to other cities?

Millersview ranks #1062 out of 1067 cities in Texas (better than 0% of state cities) and #15300 out of 15382 cities nationally (1th percentile). The grade of F reflects the combined assessment of violation history, lead and copper levels, PFAS contamination, and regulatory compliance.

Share this reportHelp others learn about their water quality
WhatsAppXFacebookLinkedInEmail
Service area: 1 ZIP code across Concho.
Show ZIP codes 76862
Sources: EPA SDWIS & ECHO · UCMR 3–5 · Lead & Copper Rule samples · EPA TRI · U.S. Drought Monitor · FEMA declarations. Data last updated Jul 2026. Analysis by the WaterVerge Editorial Team · methodology.