Skip to main content
WaterVerge

Water quality report · updated Jul 2026

Is Midlothian, TX Tap Water Safe to Drink?

Graded B — but Manganese and Chlorate were detected above EPA limits. Here's what's in the water and how to remove it. What to do ↓

2 contaminants over a legal limit
1.7 ppb lead, 90th percentile · low
19 unresolved violations
72K people served by 3 water systems

PWSID TX0700005 · high data confidence · local government utility

Reviewed by WaterVerge Editorial Team · Last updated July 2026
B 75.9 / 100

#474 of 1067Texas cities
How we grade →

01The verdict: is Midlothian water safe?

Midlothian's drinking water has significant quality concerns based on EPA testing data. With a grade of B (75.9/100), the system has issues across multiple categories. A water filter is recommended for all residents. The city's 3 water systems serve approximately 72,423 residents using surface water (rivers, lakes, or reservoirs).

The concern

Manganese is over its legal limit

Measured at 108.9 µg/L against the EPA Secondary MCL of 50 µg/L. The ledger below shows how far over — and which filter removes it.

See the measurement ↓
The good news

Lead is well under the limit

90th-percentile lead is 1.7 ppb — beneath the 15 ppb federal action level and under the 5 ppb watch threshold.

See the trend ↓
Keep watching

lithium is approaching its limit

Measured at 179.5000 µg/L — 120% of the 0.004 µg/L limit. Within the rules, but with less headroom than you'd want.

See the ledger ↓

Midlothian's drinking water received a grade of B (75.9 out of 100), indicating good water quality. The city's 3 water systems serve approximately 72,423 residents using surface water.

Lead levels were measured at 1.7 ppb (90th percentile), well within EPA limits. UCMR 5 testing detected 8 PFAS compounds, with levels exceeding EPA maximum contaminant levels in the water supply. The system has 56 violations on record, including 12 health-based violations. 19 remain unresolved.

Midlothian ranks #474 out of 1067 cities in Texas for water quality, placing it mid-range in the state. The city draws from surface water sources, which are more susceptible to seasonal runoff and agricultural contamination, requiring extensive multi-barrier treatment including coagulation, filtration, and disinfection. Of particular concern: PFAS "forever chemical" levels exceed the 2024 EPA maximum contaminant levels. These synthetic compounds don't break down naturally and require specialized filtration such as reverse osmosis or granular activated carbon. Hexavalent chromium (chromium-6) was detected at 0.07 µg/L in UCMR 3 testing. While below California's 10 µg/L limit and with no federal MCL set, residents sensitive to this contaminant may consider reverse osmosis filtration.

How the 75.9/100 breaks down Methodology →
ViolationsHistorical violation record including health-based and monitoring violations.
35.6 / 45B
Lead & CopperLead at 1.7 ppb (90th percentile).
20 / 20A
Contaminants8 PFAS compounds detected.
11.3 / 20D
ComplianceMonitoring and reporting compliance with EPA regulations.
5 / 10D
Source RiskWater source: Surface water.
4 / 5B

02What's in Midlothian's water

Every contaminant flagged in Midlothian, on one shared scale: distance to its own legal limit. The red line is the limit — anything past it is out of compliance, and the closer a bar gets, the less headroom the system has.

10 detections · sorted by % of legal limit
Over the limit Elevated — watch Within limits
0 50% LEGAL LIMIT 150%
lithium PFAS / Forever Chemical
179.5000 µg/L 120% of limit
Manganese Inorganic
108.9 µg/L 120% of limit
Chlorate Disinfection Byproduct
600.0 µg/L 120% of limit
Lithium Inorganic
179.5 µg/L 120% of limit
Strontium Inorganic
650.0 µg/L 43% of limit
Molybdenum Inorganic
8.37 µg/L 21% of limit
Vanadium Inorganic
1.27 µg/L 6% of limit
39 contaminants tested under EPA SDWIS, LCR and UCMR programs · 17 detected · 2 PFAS over EPA MCL · PFAS hazard index 2.75 (above the 1.0 threshold) Contaminants without a federal MCL are shown against the strictest state or advisory level named in each row.

Full contaminants report

Contaminant Detected Level EPA Limit Unit Category Status
Lead (90th percentile) 1.7 15 ppb Inorganic Safe
11Cl-PF3OUdS ND HI µg/L PFAS Not Detected
4:2 FTS ND HI µg/L PFAS Not Detected
6:2 FTS ND HI µg/L PFAS Not Detected
8:2 FTS ND HI µg/L PFAS Not Detected
9Cl-PF3ONS ND HI µg/L PFAS Not Detected
ADONA ND HI µg/L PFAS Not Detected
HFPO-DA ND 0.01 µg/L PFAS Not Detected
lithium 179.500 HI µg/L PFAS Detected
NEtFOSAA ND HI µg/L PFAS Not Detected
NFDHA ND HI µg/L PFAS Not Detected
NMeFOSAA ND HI µg/L PFAS Not Detected
PFBA 0.012 HI µg/L PFAS Detected
PFBS 0.005 HI µg/L PFAS Detected
PFDA ND HI µg/L PFAS Not Detected
PFDoA ND HI µg/L PFAS Not Detected
PFEESA ND HI µg/L PFAS Not Detected
PFHpA 0.004 HI µg/L PFAS Detected
PFHpS ND HI µg/L PFAS Not Detected
PFHxA 0.009 HI µg/L PFAS Detected
PFHxS ND HI µg/L PFAS Not Detected
PFMBA ND HI µg/L PFAS Not Detected
PFMPA ND HI µg/L PFAS Not Detected
PFNA ND HI µg/L PFAS Not Detected
PFOA 0.005 0.004 µg/L PFAS Over MCL
PFOS 0.006 0.004 µg/L PFAS Over MCL
PFPeA 0.010 HI µg/L PFAS Detected
PFPeS ND HI µg/L PFAS Not Detected
PFTA ND HI µg/L PFAS Not Detected
PFTrDA ND HI µg/L PFAS Not Detected
PFUnA ND HI µg/L PFAS Not Detected
Data source: EPA SDWIS, UCMR 5, local utility CCR.

03Midlothian's ten-year track record

Each box is one year. A green check means no EPA violations; a numbered badge counts that year's violations — red if any were health-based, amber if they were monitoring or paperwork issues. The system has 56 violations on record, including 12 health-based violations. 19 remain unresolved.

5 of the last ten years were clean. The numbered years had EPA violations — red when any were health-based, amber when they were paperwork or missed-testing issues.

2 health-based in 10 yrs 6 monitoring & paperwork 4 still unresolved
PFAS8 PFAS "forever chemical" compounds detectedPFAS levels exceed EPA maximum contaminant levels. Reverse osmosis or activated carbon filtration recommended.
UpdateWater quality data updatedLatest EPA compliance and testing data incorporated into Midlothian's water quality assessment. Grade: B (75.9/100).
DisasterSEVERE STORMS, STRAIGHT-LINE WINDS, TORNADOES, AND FLOODINGFederal disaster declaration (FEMA DR-4781). Flood event — may have impacted local water infrastructure.
Violation1 drinking water violation recordedContaminants: Public Notice.Open
DisasterTROPICAL STORMS MARCO AND LAURAFederal disaster declaration (FEMA DR-3540). Hurricane event — may have impacted local water infrastructure.
Violation1 drinking water violation recordedContaminants: Chlorite.Resolved
Lead, 90th percentileppb · lower is better
05101520EPA action level · 15 ppb1993 — 2.4 ppb1994 — 1 ppb1995 — 1 ppb1996 — 1.7 ppb1997 — 3.7 ppb1998 — 1.9 ppb1999 — 4.6 ppb2001 — 3.3 ppb2002 — 1.6 ppb2005 — 1.8 ppb2007 — 2.1 ppb2008 — 2.6 ppb2010 — 3.2 ppb2011 — 1.5 ppb2013 — 2.3 ppb2014 — 3.7 ppb2016 — 8.4 ppb2017 — 0 ppb2019 — 0 ppb2020 — 1.4 ppb2022 — 0 ppb2023 — 3.0 ppb2024 — 2.0 ppb2025 — 1.7 ppb2.41.7199319982007201420222025

Down 0.72 ppb since 1993. Latest reading: 1.7 ppb (2025) — 11% of the action level. Sampled at higher-risk homes (90th percentile).

04Where Midlothian's water comes from

Midlothian's drinking water comes primarily from surface water sources such as rivers, lakes, or reservoirs.

Source

Surface Water

Rivers, lakes, or reservoirs — more exposed to runoff, agriculture, and seasonal swings than groundwater.

Treatment

Local treatment

Multi-barrier treatment: coagulation, sedimentation, filtration, and disinfection to meet EPA standards.

Distribution

3 systems

3 water systems (2 wholesalers), operated under local government ownership.

Delivery

72,423 people

Residents served across Midlothian's service area.

Surface water systems require multi-stage treatment including coagulation, sedimentation, filtration, and disinfection to meet EPA Safe Drinking Water Act standards. These sources can be impacted by seasonal changes, stormwater runoff, upstream agriculture, and industrial discharge. The system is operated by local government ownership and serves approximately 72,423 people through 3 water systems.

System namePWSIDPopulationSource
CITY OF MIDLOTHIAN TX0700005 27,699 Surface Water
MOUNTAIN PEAK SUD TX0700042 23,988 Purchased Surface Water
SARDIS LONE ELM WSC TX0700034 20,736 Purchased Surface Water

Water bodies near Midlothian

Mountain Ck Nr Venus · river Walnut Ck Nr Mansfield · river Waxahachie Ck At Waxahachie · river

As a surface-water system, these water bodies may directly influence Midlothian's drinking water supply.

05Pressure on Midlothian's watershed

Outside forces that shape what reaches the treatment plant. None of these is a verdict on the tap by itself — but each adds pressure worth knowing about.

Industrial discharge

Present — monitored

5 facilities within 10 miles reported 7k lb released to surface water in the latest EPA Toxics Release Inventory. Proximity doesn't equal tap contamination — treatment and hydrology decide — but it's pressure on the watershed.

CHAPARRAL STEEL MIDLOTHIAN LP — manganese compounds 7k lb · 2.2 mi
MARTIN MARIETTA NORTH TEXAS CEMENT LLC — manganese and manganese compounds 260 lb · 2.3 mi
OWENS CORNING INSULATING SYSTEMS LLC - WAXAHACHIE — ammonia 8 lb · 8.3 mi
+ 2 more facilities

Flood & storm history

Recurring — declared disasters

4 federal disaster declarations on record for Ellis County. Flooding and severe storms can overwhelm treatment plants, cause sewage overflows, and push runoff into supplies.

SEVERE STORMS, STRAIGHT-LINE WINDS, TORNADOES, AND FLOODING May 2024 · DR-4781
TROPICAL STORMS MARCO AND LAURA Aug 2020 · DR-3540
HURRICANE IKE Sep 2008 · DR-3294

06How Midlothian compares

Scores for nearby Texas cities on one line, with the average marked.

Midlothian (this city)
75.9 · B
Dallas
36.2 · F
Fort Worth
34.5 · F
San Antonio
33.1 · F
Austin
31.2 · F
Houston
27.8 · F

dashed line = Texas average (46/100)

Midlothian scores 75.9/100above the Texas average of 46/100. It outscores 8 of 10 nearby cities. Full Texas rankings →

Ellis water quality rankings
Compare all cities in the county — grades, violations, and contaminant data side by side.

07What to do at home

Steps matched to what testing actually found in Midlothian's water — not generic advice.

Because of pfas

Filter drinking & cooking water

Reverse osmosis system. PFAS compounds exceed EPA maximum contaminant levels

Compare tested filters →
Know your report

Read your utility's annual report

Every utility must publish a yearly Consumer Confidence Report with its own testing results. It pairs well with the independent data on this page.

How to read a CCR →
Stay informed

Watch for Midlothian alerts

This area has a history of flood declarations — after severe weather, watch for boil-water advisories from the utility, and check the live alerts on this page.

All water alerts →

Frequently asked questions

Is Midlothian, TX tap water safe to drink?

Midlothian's water quality earned a grade of B (75.9/100). Some concerns have been identified. Consider a water filter for an extra layer of protection. The city ranks #474 out of 1067 cities tested in Texas.

What contaminants are in Midlothian's water?

Lead was measured at 1.7 ppb (90th percentile). 8 PFAS compounds were detected. 56 violations are on record.

How is Midlothian's water quality grade calculated?

The grade is based on four factors: violation history (40%), lead and copper levels (25%), PFAS contamination (25%), and regulatory compliance (10%). The score is also adjusted based on how complete the available data is. See our methodology page for full details.

Do I need a water filter in Midlothian?

PFAS compounds exceed EPA limits — a reverse osmosis or activated carbon filter is recommended.

Where does Midlothian's water come from?

Midlothian's water is sourced from Surface water. The city has 3 water systems serving approximately 72,423 residents.

What health violations has Midlothian's water system had?

Midlothian has 12 health-based violations on record. The most recent violation was recorded in February 2022. Health-based violations mean the water exceeded EPA maximum contaminant levels (MCLs) for a regulated substance. 19 violations remain unresolved.

Why does Midlothian have so many PFAS compounds in its water?

8 different PFAS "forever chemical" compounds were detected in Midlothian's water supply during UCMR 5 testing. PFAS contamination often originates from proximity to military installations (AFFF firefighting foam), airports, industrial manufacturing sites, or wastewater treatment facilities. Some levels exceed the 2024 EPA maximum contaminant levels — a reverse osmosis or NSF-certified activated carbon filter is strongly recommended.

How does Midlothian's water compare to other cities?

Midlothian ranks #474 out of 1067 cities in Texas (better than 56% of state cities) and #9327 out of 15382 cities nationally (39th percentile). The grade of B reflects the combined assessment of violation history, lead and copper levels, PFAS contamination, and regulatory compliance.

Share this reportHelp others learn about their water quality
WhatsAppXFacebookLinkedInEmail
About Midlothian, TX: Median household income $119,323 · median home value $325,775 · median age 35.5 · 82.5% homeowners · 36.7% college educated. Service area: 1 ZIP code across Ellis.
Show ZIP codes 76065
Sources: EPA SDWIS & ECHO · UCMR 3–5 · Lead & Copper Rule samples · EPA TRI · U.S. Drought Monitor · FEMA declarations. Data last updated Jul 2026. Analysis by the WaterVerge Editorial Team · methodology.