Is Dayton, TX Tap Water Safe to Drink?
Graded D, with 81 unresolved violations on record. See what was cited — and what it means for your tap. What to do next ↓
45.2/100
waterverge.com Dayton, TX — Water Quality Report
Dayton's drinking water received a grade of D (45.2 out of 100), indicating poor water quality. The city's 4 water systems serve approximately 15,772 residents using groundwater.
Lead levels were measured at 0.0 ppb (90th percentile), well within EPA limits. UCMR 5 testing detected 1 PFAS compound in the water supply.
The system has 306 violations on record, including 4 health-based violations. 81 remain unresolved.
What to know about Dayton's water
Dayton ranks #880 out of 1067 cities in Texas for water quality, placing it among the lowest-rated in the state.
Dayton relies on groundwater, which is generally less vulnerable to surface contamination but can be affected by naturally occurring minerals like arsenic and nitrate, as well as agricultural and industrial runoff.
PFAS compounds were detected in testing, though levels remain within current EPA limits. Residents seeking extra precaution may consider an activated carbon or reverse osmosis filter.
Hexavalent chromium (chromium-6) was detected at 7.08 µg/L in UCMR 3 testing. While below California's 10 µg/L limit and with no federal MCL set, residents sensitive to this contaminant may consider reverse osmosis filtration.
The system has seen 211 violations in the past five years, suggesting a pattern of compliance challenges that residents should monitor closely.
Water quality score
See methodology →Is Dayton, TX water safe to drink?
Dayton's drinking water has significant quality concerns based on EPA testing data. With a grade of D (45.2/100), the system has issues across multiple categories. A water filter is recommended for all residents. The city's 4 water systems serve approximately 15,772 residents using groundwater (wells).
Recent water quality updates for Dayton
A timeline of significant water quality events, violations, and data updates.
Detected at levels within current EPA limits. PFAS persist indefinitely in the environment.
Latest EPA compliance and testing data incorporated into Dayton's water quality assessment. Grade: D (45.2/100).
Contaminants: Public Notice, Revised Total Coliform Rule.
Contaminants: Revised Total Coliform Rule.
Contaminants: Lead and Copper Rule, Revised Total Coliform Rule.
Federal disaster declaration (FEMA DR-4798). Hurricane event — may have impacted local water infrastructure.
Key contaminant findings
Based on the most recent EPA sampling data for Dayton's water supply.
Well within EPA limits.
Detected but within current EPA limits. PFAS do not break down in the environment and can accumulate in the body over time. An activated carbon filter can reduce exposure.
The "Erin Brockovich" chemical. There is no federal MCL, but California has set a limit of 10 µg/L. Reverse osmosis filtration is effective at removing hexavalent chromium.
Violation history
Dayton's water system has 306 total violations on record, including 4 health-based violations. 81 remain unresolved. 211 violations were issued in the last 5 years.
Flood & environmental risk
Liberty County has experienced 10 federally declared disasters since 2008. Flooding and severe storms can overwhelm water treatment plants, cause sewage overflows, and introduce agricultural runoff, bacteria, and sediment into drinking water supplies. Local water sources include Trinity Rv At Liberty, Cwa Canal Nr Dayton, Trinity Rv Nr Moss Bluff, Old Rv Cutoff Nr Moss Bluff, Cedar Bayou Nr Crosby.
Where does Dayton's water come from?
Dayton's drinking water comes from groundwater (wells), supplied by 4 water systems serving approximately 15,772 people. Groundwater is generally less susceptible to surface contamination but can contain naturally occurring contaminants like arsenic, radon, and nitrate. Nearby water bodies include Trinity Rv At Liberty (river), Cwa Canal Nr Dayton (stream), Trinity Rv Nr Moss Bluff (stream), Old Rv Cutoff Nr Moss Bluff (stream), Cedar Bayou Nr Crosby (river).
What Dayton residents can do
Recommended: Activated carbon or reverse osmosis filter. This addresses the specific contaminants found in Dayton's water.
Your water utility is required to publish an annual Consumer Confidence Report (CCR) with detailed testing results. Ask for the latest copy or check your utility's website.
Dayton's area has a history of flooding. After severe weather, watch for boil water advisories from your local utility.
Data: EPA SDWIS, UCMR 5 (PFAS), FEMA, NOAA. Last updated May 2026.
Top contaminants to know
View all ↓Forever chemicals overview
National PFAS report →Violation summary
Violations & advisories
Top industrial polluters within 10 miles of Dayton
Industrial polluters nearby
Reported releases to surface water by facilities near Dayton, ranked by pounds discharged annually.
Total reported releases to surface water: 276 lbs
| Facility | Top chemical | To surface water (lbs/yr) | Distance |
|---|---|---|---|
EXXONMOBIL MONT BELVIEU PLASTICS PLANT BAYTOWN, TX77521 | Zinc compounds | 272 | 9.8 mi |
INSTEEL WIRE PRODUCTS DAYTON, TX77535 | Lead compounds | 4 | 2.4 mi |
ALTIVIA CROSBY FACILITY CROSBY, TX77532 | Nonylphenol | 0 | 9.5 mi |
CEMEX CONSTRUCTION MATERIALS HOUSTON LLC-MONT BELVIEU MONT BELVIEU, TX77521 | — | — | 9.2 mi |
INDORAMA VENTURES OXIDES LLC DAYTON, TX77535 | — | — | 4.4 mi |
Source: EPA Toxic Release Inventory (TRI) 2023
Drought conditions
D2 — severe droughtLiberty County is currently in D2 (severe drought) per the U.S. Drought Monitor (week of May 5, 2026). Drought can elevate disinfection-byproduct (TTHM/HAA5) levels and taste/odor issues as utilities draw from lower reservoirs.
Source: U.S. Drought Monitor, updated weekly by NDMC, USDA, and NOAA.
Flood & disaster history
Liberty County has experienced 10 federally declared disasters since 2008. Flooding and severe weather can compromise water treatment infrastructure and introduce contaminants into drinking water supplies.
Recommended water filters
Based on contaminants detected in Dayton's water supply, we recommend the following filter types.
Full contaminants report
| Contaminant | Detected Level | EPA Limit | Unit | Category | Status |
|---|---|---|---|---|---|
| Lead (90th percentile) LeadHeavy Metal A toxic heavy metal that can leach into drinking water from older pipes, solder, and fixtures. No amount of lead in water is considered safe. Health EffectsBrain and nervous system damage in children, kidney damage, high blood pressure, and reproductive problems in adults. EPA Limit15 ppb action level Common SourcesCorrosion of lead pipes, lead solder, brass faucets, and household plumbing. | 0.0 | 15 | ppb | Inorganic | Safe |
| 11Cl-PF3OUdS | ND | HI | µg/L | PFAS | Not Detected |
| 4:2 FTS | ND | HI | µg/L | PFAS | Not Detected |
| 6:2 FTS 6:2 FTSPFAS A fluorotelomer sulfonate commonly found at sites contaminated with aqueous film-forming foam (AFFF) used in firefighting. Health EffectsPotential liver toxicity and endocrine disruption. Less studied but identified as a contaminant of concern. EPA LimitNo individual MCL (not yet regulated) Common SourcesFirefighting foam (AFFF), airports, military bases, and industrial facilities. | ND | HI | µg/L | PFAS | Not Detected |
| 8:2 FTS | ND | HI | µg/L | PFAS | Not Detected |
| 9Cl-PF3ONS | ND | HI | µg/L | PFAS | Not Detected |
| ADONA | ND | HI | µg/L | PFAS | Not Detected |
| HFPO-DA HFPO-DA (GenX)PFAS A replacement for PFOA in manufacturing, marketed as safer but still a persistent "forever chemical." Also known as GenX. Health EffectsLiver and kidney effects, reproductive toxicity, immune system effects, and potential cancer risk. EPA Limit10 ppt MCL Common SourcesFluoropolymer manufacturing (used as PFOA replacement), industrial wastewater discharge. | ND | 0.01 | µg/L | PFAS | Not Detected |
| lithium LithiumInorganic A naturally occurring alkali metal found in groundwater. Monitored under UCMR 5 to assess occurrence in drinking water. Health EffectsKidney effects at high doses. Low-level exposure effects under study; some research suggests neurological effects. EPA LimitNo MCL (monitoring only under UCMR 5) Common SourcesNatural mineral deposits, geothermal water, and industrial discharge. | 16.500 | HI | µg/L | PFAS | Detected |
| NEtFOSAA | ND | HI | µg/L | PFAS | Not Detected |
| NFDHA | ND | HI | µg/L | PFAS | Not Detected |
| NMeFOSAA | ND | HI | µg/L | PFAS | Not Detected |
| PFBA PFBAPFAS One of the shortest-chain PFAS compounds. Very mobile in water and difficult to remove with standard filtration. Health EffectsThyroid effects, potential developmental toxicity. Shorter half-life in body than long-chain PFAS. EPA LimitNo individual MCL (not yet regulated) Common SourcesDegradation of longer-chain PFAS, industrial discharge, and firefighting foam. | ND | HI | µg/L | PFAS | Not Detected |
| PFBS PFBSPFAS A short-chain PFAS used as a replacement for PFOS. While it clears the body faster than long-chain PFAS, it still persists in the environment. Health EffectsThyroid effects, reproductive and developmental toxicity, kidney effects. EPA LimitPart of Hazard Index (1.0) Common SourcesIndustrial discharge, firefighting foam, and as a replacement chemical in manufacturing. | ND | HI | µg/L | PFAS | Not Detected |
| PFDA | ND | HI | µg/L | PFAS | Not Detected |
| PFDoA | ND | HI | µg/L | PFAS | Not Detected |
| PFEESA | ND | HI | µg/L | PFAS | Not Detected |
| PFHpA PFHpAPFAS A medium-chain PFAS compound found in various environmental samples. Less studied than PFOA/PFOS but still considered a contaminant of concern. Health EffectsLiver effects, potential developmental toxicity, and endocrine disruption. EPA LimitPart of Hazard Index (1.0) Common SourcesDegradation of longer-chain PFAS, industrial discharge, and contaminated water sources. | ND | HI | µg/L | PFAS | Not Detected |
| PFHpS | ND | HI | µg/L | PFAS | Not Detected |
| PFHxA PFHxAPFAS A short-chain PFAS replacement chemical widely used after manufacturers phased out longer-chain PFAS. Very commonly detected in water. Health EffectsLiver and kidney effects, potential thyroid disruption. Considered less toxic than long-chain PFAS but still persistent. EPA LimitNo individual MCL (not yet regulated) Common SourcesIndustrial processes, firefighting foam (AFFF), food packaging, and textile treatment. | ND | HI | µg/L | PFAS | Not Detected |
| PFHxS PFHxSPFAS A medium-chain PFAS found in firefighting foam and consumer products. It has a long half-life in the human body, similar to long-chain PFAS. Health EffectsImmune system effects, thyroid disruption, and potential reproductive and developmental harm. EPA LimitPart of Hazard Index (1.0) Common SourcesFirefighting foam (AFFF), waterproof textiles, food packaging, and industrial discharge. | ND | HI | µg/L | PFAS | Not Detected |
| PFMBA | ND | HI | µg/L | PFAS | Not Detected |
| PFMPA | ND | HI | µg/L | PFAS | Not Detected |
| PFNA PFNAPFAS A long-chain PFAS compound used in manufacturing fluoropolymers. It bioaccumulates in the body and is very persistent in the environment. Health EffectsDevelopmental effects, liver toxicity, immune suppression, and potential cancer risk. EPA LimitPart of Hazard Index (1.0) Common SourcesFluoropolymer manufacturing, industrial emissions, and contaminated water sources. | ND | HI | µg/L | PFAS | Not Detected |
| PFOA PFOAPFAS A long-chain PFAS ("forever chemical") once widely used in nonstick coatings and firefighting foam. It persists in the body and environment for years. Health EffectsLinked to kidney and testicular cancer, thyroid disease, elevated cholesterol, and reproductive issues. EPA Limit4.0 ppt MCL Common SourcesIndustrial discharge, firefighting foam (AFFF), nonstick cookware manufacturing, and contaminated groundwater. | ND | 0.004 | µg/L | PFAS | Not Detected |
| PFOS PFOSPFAS A long-chain PFAS compound historically used in stain-resistant coatings and firefighting foam. One of the most studied and persistent PFAS chemicals. Health EffectsLiver damage, immune system suppression, thyroid disruption, increased cholesterol, and potential cancer risk. EPA Limit4.0 ppt MCL Common SourcesFirefighting foam (AFFF), industrial sites, stain-resistant fabric treatments, and contaminated groundwater. | ND | 0.004 | µg/L | PFAS | Not Detected |
| PFPeA PFPeAPFAS A short-chain PFAS compound commonly detected in drinking water. One of the most frequently found PFAS in UCMR 5 monitoring. Health EffectsLess studied than PFOA/PFOS. Potential liver and thyroid effects. Research is ongoing. EPA LimitNo individual MCL (not yet regulated) Common SourcesIndustrial discharge, firefighting foam degradation, and consumer products. | ND | HI | µg/L | PFAS | Not Detected |
| PFPeS | ND | HI | µg/L | PFAS | Not Detected |
| PFTA | ND | HI | µg/L | PFAS | Not Detected |
| PFTrDA | ND | HI | µg/L | PFAS | Not Detected |
| PFUnA | ND | HI | µg/L | PFAS | Not Detected |
Lead level trend (90th percentile)
See how Dayton compares by contaminant
Explore where Dayton ranks among all Texas cities for specific contaminants.
Water source & infrastructure
Where Dayton's water comes from
Dayton's drinking water is drawn from underground aquifers through wells.
Groundwater is naturally filtered through rock and soil layers, generally requiring less treatment than surface water. However, it can contain naturally occurring contaminants like arsenic, radon, and minerals.
Agricultural activity, septic systems, and industrial operations near well fields can introduce nitrates, pesticides, and volatile organic compounds.
The system is operated by local government ownership and serves approximately 15,772 people through 4 water systems.
Water bodies near Dayton
Dayton is located near 5 notable water bodies. These water bodies contribute to the regional watershed and may indirectly affect groundwater quality.
Water systems serving Dayton
| System Name | PWSID | Population | Source |
|---|---|---|---|
| CITY OF DAYTON | TX1460002 | 15,393 | GW |
| NORTHPARK WSC | TX1460092 | 279 | GW |
| HUNTERS COVE SEC 1 | TX1460050 | 64 | GW |
| CITY OF DAYTON LAKES | TX1460037 | 36 | GW |
How Dayton compares
Full Texas rankings →Dayton's score of 45.2/100 is on par with the average of 46/100 among major Texas cities. It outscores 7 of 10 nearby cities.
Nearby cities
View Texas rankings →About Dayton, TX
Wikipedia →Dayton is a city in Liberty County, Texas, United States. The population was 8,777 at the 2020 census.
Learn more about your water
Guides and resources related to Dayton's water quality findings.
Explore water quality across Liberty
Frequently asked questions
Is Dayton, TX tap water safe to drink?
Dayton's water quality earned a grade of D (45.2/100). Significant issues have been found. A water filter is strongly recommended. The city ranks #880 out of 1067 cities tested in Texas.
What contaminants are in Dayton's water?
Lead was measured at 0.0 ppb (90th percentile). 1 PFAS compound was detected. 306 violations are on record.
How is Dayton's water quality grade calculated?
The grade is based on four factors: violation history (40%), lead and copper levels (25%), PFAS contamination (25%), and regulatory compliance (10%). The score is also adjusted based on how complete the available data is. See our methodology page for full details.
Do I need a water filter in Dayton?
PFAS compounds have been detected. A filter with activated carbon can help reduce exposure.
Where does Dayton's water come from?
Dayton's water is sourced from Groundwater. The city has 4 water systems serving approximately 15,772 residents.
What health violations has Dayton's water system had?
Dayton has 4 health-based violations on record. The most recent violation was recorded in December 2025. Health-based violations mean the water exceeded EPA maximum contaminant levels (MCLs) for a regulated substance. 81 violations remain unresolved.
Is Dayton's groundwater at risk of contamination?
Dayton uses groundwater, which can be affected by naturally occurring contaminants like arsenic, radon, and nitrate, as well as agricultural runoff and industrial activity. The system has 306 violations on record that may relate to groundwater quality. Groundwater systems are generally less susceptible to surface contamination but should be monitored for emerging contaminants like PFAS.
How does Dayton's water compare to other cities?
Dayton ranks #880 out of 1067 cities in Texas (better than 18% of state cities) and #14177 out of 15744 cities nationally (10th percentile). The grade of D reflects the combined assessment of violation history, lead and copper levels, PFAS contamination, and regulatory compliance.