WaterVerge

Is Alice, TX Tap Water Safe to Drink?

Graded F — but HAA5 and Chlorate were detected above EPA limits. Here's what's in the water and how to remove it. What to do next ↓

21K residents served 2 water systems PWSID: TX1250001
Overall Score
41.6 / 100
Violations
60 active
Last Updated
May 2026
Source
Surface water
#977 of 1067 in Texas Top 95% nationally
Local Government
High data confidence
Reviewed by WaterVerge Editorial Team · Last updated May 2026
FGRADE
Water Quality Grade
41.6/100
waterverge.com
F 41.6/100

Alice, TX — Water Quality Report

Alice's drinking water received a grade of F (41.6 out of 100), indicating failing water quality. The city's 2 water systems serve approximately 21,054 residents using surface water.

Lead levels were measured at 1.7 ppb (90th percentile), well within EPA limits. UCMR 5 testing detected 2 PFAS compounds in the water supply.

The system has 212 violations on record, including 103 health-based violations. 60 remain unresolved.

Data last updated: May 2026 · Source: EPA SDWIS, UCMR 5
Analysis

What to know about Alice's water

Alice ranks #977 out of 1067 cities in Texas for water quality, placing it among the lowest-rated in the state.

The city draws from surface water sources, which are more susceptible to seasonal runoff and agricultural contamination, requiring extensive multi-barrier treatment including coagulation, filtration, and disinfection.

PFAS compounds were detected in testing, though levels remain within current EPA limits. Residents seeking extra precaution may consider an activated carbon or reverse osmosis filter.

Disinfection byproduct (HAA5) levels exceeded the EPA's 60 µg/L maximum contaminant level in UCMR 4 testing (2018–2020). These compounds form when chlorine reacts with natural organic matter and have been linked to increased cancer risk with long-term exposure.

Hexavalent chromium (chromium-6) was detected at 0.05 µg/L in UCMR 3 testing. While below California's 10 µg/L limit and with no federal MCL set, residents sensitive to this contaminant may consider reverse osmosis filtration.

The system has seen 47 violations in the past five years, suggesting a pattern of compliance challenges that residents should monitor closely.

Quality Breakdown

Water quality score

See methodology →
41.6 out of 100 Grade F
A: 90-100
B: 74-89
C: 60-73
F: <50
How is this calculated?
Violations
0/45
F
Historical violation record including health-based and monitoring violations.
Lead & Copper
20/20
A
Lead at 1.7 ppb (90th percentile).
Contaminants
12.6/20
C
2 PFAS compounds detected.
Compliance
5/10
D
Monitoring and reporting compliance with EPA regulations.
Source Risk
4/5
B
Water source: Surface water.
Water Safety

Is Alice, TX water safe to drink?

Concerns Identified

Alice's drinking water has significant quality concerns based on EPA testing data. With a grade of F (41.6/100), the system has issues across multiple categories. A water filter is recommended for all residents. The city's 2 water systems serve approximately 21,054 residents using surface water (rivers, lakes, or reservoirs).

60
Active Violations
1.7 ppb
Lead (90th %ile)
2 compounds
PFAS Detected
10 events
Disaster History

Recent water quality updates for Alice

A timeline of significant water quality events, violations, and data updates.

PFAS
2 PFAS "forever chemical" compounds detected

Detected at levels within current EPA limits. PFAS persist indefinitely in the environment.

Update
Water quality data updated

Latest EPA compliance and testing data incorporated into Alice's water quality assessment. Grade: F (41.6/100).

Violation
1 drinking water violation recorded

Contaminants: Lead and Copper Rule.

Violation
1 drinking water violation recorded

Contaminants: Public Notice.

Violation
1 drinking water violation recorded

1 health-based. Contaminants: Arsenic.

Disaster
HURRICANE HANNA

Federal disaster declaration (FEMA DR-3530). Hurricane event — may have impacted local water infrastructure.

Key contaminant findings

Based on the most recent EPA sampling data for Alice's water supply.

Lead Within Limits
Detected: 1.7 ppb Limit: 15 ppb (EPA Action Level)

Well within EPA limits.

PFAS (2 compounds) Elevated
Detected: Highest: lithium at 31.9000 µg/L Limit: 0.004 µg/L (EPA MCL)

Detected but within current EPA limits. PFAS do not break down in the environment and can accumulate in the body over time. An activated carbon filter can reduce exposure.

HAA5 (Disinfection Byproducts) Exceeds Limit
Detected: 95.0 µg/L Limit: 60 µg/L (EPA MCL)

Haloacetic acids exceed the EPA limit. These byproducts form when disinfectants react with organic matter in water.

PFAS "forever chemicals" detected

UCMR 5 testing found 2 PFAS compounds in Alice's water supply. PFAS are synthetic chemicals that persist indefinitely in the environment and the human body.

Compound Level EPA MCL Status
lithium 31.9000 µg/L 0.004 µg/L Within Limit
PFBA 0.0114 µg/L 0.004 µg/L Within Limit

Violation history

Alice's water system has 212 total violations on record, including 103 health-based violations. 60 remain unresolved. 47 violations were issued in the last 5 years.

MROtherMCLTTRPTMON
Most recent violations:
Dec 2025 Lead and Copper Rule Open
Nov 2025 Public Notice Open
Oct 2025 Arsenic Resolved
Jul 2025 Public Notice Open
Jul 2025 Total Haloacetic Acids (HAA5) Resolved

Flood & environmental risk

Jim Wells County has experienced 10 federally declared disasters since 2005. Flooding and severe storms can overwhelm water treatment plants, cause sewage overflows, and introduce agricultural runoff, bacteria, and sediment into drinking water supplies. Local water sources include San Diego Ck At Alice, San Fernando Ck At Alice.

HURRICANE HANNA
Hurricane FEMA DR-3530
SEVERE STORMS AND FLOODING
Flood FEMA DR-4377
HURRICANE HARVEY
Hurricane FEMA DR-4332

Where does Alice's water come from?

Alice's drinking water comes from surface water (rivers, lakes, or reservoirs), supplied by 2 water systems serving approximately 21,054 people. Surface water sources are more susceptible to contamination from runoff, industrial discharge, and algal blooms, requiring extensive treatment. Nearby water bodies include San Diego Ck At Alice (river), San Fernando Ck At Alice (river).

What Alice residents can do

Install a water filter

Recommended: Activated carbon filter. This addresses the specific contaminants found in Alice's water.

Request your utility's CCR

Your water utility is required to publish an annual Consumer Confidence Report (CCR) with detailed testing results. Ask for the latest copy or check your utility's website.

Monitor alerts during storms

Alice's area has a history of flooding. After severe weather, watch for boil water advisories from your local utility.

Data: EPA SDWIS, UCMR 5 (PFAS), FEMA, NOAA. Last updated May 2026.

Contaminant Alerts

Top contaminants to know

View all ↓
Lead (90th percentile)
Inorganic / Heavy Metal
Safe
1.7 ppb
EPA Action Level: 15 ppb · 11% of limit
Safe Level
lithium
PFAS / Forever Chemical
Near MCL
31.9000 µg/L
EPA MCL: 0.004 µg/L · +20% over limit
Detected
HAA5 (Disinfection Byproducts)
Disinfection Byproduct
Over MCL
95.0 µg/L
EPA MCL: 60 µg/L · +20% over limit
Exceeds MCLUCMR 4 DataHAA6Br: 49.8 µg/LHAA9: 137.3 µg/L
Chromium-6 (Hexavalent Chromium)
Inorganic
Detected
0.05 µg/L
CA MCL (no federal MCL): 10 µg/L · 1% of limit
DetectedUCMR 3 Data
Strontium
Inorganic
Detected
618.0 µg/L
EPA Health Ref Level: 1,500 µg/L · 41% of limit
DetectedUCMR 3 Data
Manganese
Inorganic
Detected
16.8 µg/L
EPA Secondary MCL: 50 µg/L · 34% of limit
DetectedUCMR 4 Data
Vanadium
Inorganic
Detected
8.41 µg/L
EPA Short-term HA: 21 µg/L · 40% of limit
DetectedUCMR 3 Data
Chlorate
Disinfection Byproduct
Over HA
250.0 µg/L
EPA Lifetime HA: 210 µg/L · +19% over limit
Over Health AdvisoryUCMR 3 Data
Molybdenum
Inorganic
Detected
3.93 µg/L
EPA Lifetime HA: 40 µg/L · 10% of limit
DetectedUCMR 3 Data
Lithium
Inorganic
Detected
31.9 µg/L
State screening level: 60 µg/L · 53% of limit
DetectedNo federal MCLUCMR 5 Data (2023–2025)
PFAS Testing

Forever chemicals overview

National PFAS report →
30
Compounds tested
2
Detected
0
Exceed EPA MCL
Compliance Record

Violation summary

212
Total violations
103
Health-based
60
Active / unresolved
Dec 2025
Most recent violation
Compliance Record

Violations & advisories

212 Total
60 Active
103 Health-based
152 Resolved
Violations by category
Radionuclides and Revised Rad Rule
79
Public Notice Rule and Revised PN Rule
46
Arsenic Rule
28
Stage 1 Disinfectants and Disinfection Byproducts Rule
24
Lead and Copper Rule
9
Dec 2025 Active
Lead and Copper Rule
Monitoring & Reporting
Monitoring & Reporting 0
Nov 2025 Active
Public Notice
Other Violation 0
Jul 2025 Active
Public Notice
Other Violation 0
Oct 2024 Active
LEAD AND COPPER RULE REVISIONS
Treatment Technique
Health-Based Health 0
Oct 2024 Active
LEAD AND COPPER RULE REVISIONS
Reporting
Reporting 0
Oct 2024 Active
Lead and Copper Rule
Monitoring & Reporting
Monitoring & Reporting 0
Jun 2024 Active
Public Notice
Other Violation 0
Apr 2022 Active
Public Notice
Other Violation 0
Mar 2022 Active
Public Notice
Other Violation 0
Dec 2021 Active
Public Notice
Other Violation 0
Jun 2021 Active
Public Notice
Other Violation 0
Mar 2021 Active
Public Notice
Other Violation 0
Oct 2019 Active
Public Notice
Other Violation 0
Sep 2019 Active
Public Notice
Other Violation 0
Sep 2019 Active
Public Notice
Other Violation 0
Apr 2019 Active
Public Notice
Other Violation 0
Feb 2019 Active
Public Notice
Other Violation 0
Feb 2019 Active
Public Notice
Other Violation 0
Jan 2019 Active
Public Notice
Other Violation 0
Jul 2018 Active
Consumer Confidence Rule
Other Violation 0
Showing 20 of 212 violations
Industrial pollution

Top industrial polluters within 10 miles of Alice

Industrial polluters nearby

Reported releases to surface water by facilities near Alice, ranked by pounds discharged annually.

FacilityTop chemicalTo surface water (lbs/yr)Distance
COASTAL CHEMICAL CO. LLC
Chemical Wholesalers · BRENNTAG NORTH AMERICA INC
ALICE, TX78332
7.7 mi

Source: EPA Toxic Release Inventory (TRI) 2023

Environmental Risk

Drought conditions

D2 — severe drought

Jim Wells County is currently in D2 (severe drought) per the U.S. Drought Monitor (week of May 5, 2026). Drought can elevate disinfection-byproduct (TTHM/HAA5) levels and taste/odor issues as utilities draw from lower reservoirs.

14
Weeks at D2+ (current streak)
23.7%
Months in D2+ (last 30y)
14
Weeks at D2+ (last 5y)

Source: U.S. Drought Monitor, updated weekly by NDMC, USDA, and NOAA.

Environmental Risk

Flood & disaster history

10
Declared disasters
Jul 2020
Most recent
Hurricane
Most common type

Jim Wells County has experienced 10 federally declared disasters since 2005. Flooding and severe weather can compromise water treatment infrastructure and introduce contaminants into drinking water supplies.

Jul 2020
HURRICANE HANNA
Hurricane FEMA #3530
Jul 2018
SEVERE STORMS AND FLOODING
Flood FEMA #4377
Aug 2017
HURRICANE HARVEY
Hurricane FEMA #4332
Aug 2010
HURRICANE ALEX
Hurricane FEMA #1931
Jun 2010
TROPICAL STORM ALEX
Hurricane FEMA #3313
Sep 2008
HURRICANE IKE
Hurricane FEMA #3294

Recommended water filters

Based on contaminants detected in Alice's water supply, we recommend the following filter types.

🧪
For PFAS
Reverse Osmosis or Activated Carbon Block
2 PFAS compounds detected

Full contaminants report

Contaminant Detected Level EPA Limit Unit Category Status
Lead (90th percentile) 1.7 15 ppb Inorganic Safe
11Cl-PF3OUdS ND HI µg/L PFAS Not Detected
4:2 FTS ND HI µg/L PFAS Not Detected
6:2 FTS ND HI µg/L PFAS Not Detected
8:2 FTS ND HI µg/L PFAS Not Detected
9Cl-PF3ONS ND HI µg/L PFAS Not Detected
ADONA ND HI µg/L PFAS Not Detected
HFPO-DA ND 0.01 µg/L PFAS Not Detected
lithium 31.900 HI µg/L PFAS Detected
NEtFOSAA ND HI µg/L PFAS Not Detected
NFDHA ND HI µg/L PFAS Not Detected
NMeFOSAA ND HI µg/L PFAS Not Detected
PFBA 0.011 HI µg/L PFAS Detected
PFBS ND HI µg/L PFAS Not Detected
PFDA ND HI µg/L PFAS Not Detected
PFDoA ND HI µg/L PFAS Not Detected
PFEESA ND HI µg/L PFAS Not Detected
PFHpA ND HI µg/L PFAS Not Detected
PFHpS ND HI µg/L PFAS Not Detected
PFHxA ND HI µg/L PFAS Not Detected
PFHxS ND HI µg/L PFAS Not Detected
PFMBA ND HI µg/L PFAS Not Detected
PFMPA ND HI µg/L PFAS Not Detected
PFNA ND HI µg/L PFAS Not Detected
PFOA ND 0.004 µg/L PFAS Not Detected
PFOS ND 0.004 µg/L PFAS Not Detected
PFPeA ND HI µg/L PFAS Not Detected
PFPeS ND HI µg/L PFAS Not Detected
PFTA ND HI µg/L PFAS Not Detected
PFTrDA ND HI µg/L PFAS Not Detected
PFUnA ND HI µg/L PFAS Not Detected
Data source: EPA SDWIS, UCMR 5, local utility CCR.

Lead level trend (90th percentile)

EPA action level: 15 ppb
Lead has decreased by 3.5 ppb from 1992 (5.2 ppb) to 2025 (1.7 ppb).
Infrastructure

Water source & infrastructure

Primary Source
Surface Water
Operator
Local Government
Population Served
21,054
Water Systems
2
Source breakdown
Surface Water
1
Groundwater
1
Water Source

Where Alice's water comes from

Surface Water

Alice's drinking water comes primarily from surface water sources such as rivers, lakes, or reservoirs.

Surface water systems require multi-stage treatment including coagulation, sedimentation, filtration, and disinfection to meet EPA Safe Drinking Water Act standards.

These sources can be impacted by seasonal changes, stormwater runoff, upstream agriculture, and industrial discharge.

The system is operated by local government ownership and serves approximately 21,054 people through 2 water systems.

Local Hydrology

Water bodies near Alice

Alice is located near 2 notable water bodies. As a surface water system, these water bodies may directly influence the city's drinking water supply.

San Diego Ck At Alice
river
San Fernando Ck At Alice
river
Infrastructure

Water systems serving Alice

System Name PWSID Population Source
CITY OF ALICE TX1250001 19,104 SW
JIM WELLS COUNTY FWSD 1 TX1250030 1,950 GW
Regional Comparison

How Alice compares

Full Texas rankings →

Alice's score of 41.6/100 is on par with the average of 46/100 among major Texas cities. It outscores 6 of 10 nearby cities.

Alice (this city)
41.6
Houston
27.8
Austin
31.2
Dallas
36.2
Fort Worth
34.5
Texas avg
46
City Profile

About Alice, TX

Wikipedia →

Alice is a city in and the county seat of Jim Wells County, Texas, United States, in the South Texas region of the state. As of the 2020 census, Alice had a population of 17,891. Alice was established in 1888. The city was originally named "Bandana", then "Kleberg", and finally "Alice" after Alice Gertrudis King Kleberg, the daughter of Richard King, who established the King Ranch.

Economic Profile
$43,017
Median Income
$99,459
Median Home Value
$860/mo
Median Rent
3.3%
Unemployment
Community
35
Median Age
577
People / sq mi
13.4%
College Educated
55.1%
Homeownership
Share this reportHelp others learn about their water quality
WhatsAppXFacebookLinkedInEmail

Frequently asked questions

Is Alice, TX tap water safe to drink?

Alice's water quality earned a grade of F (41.6/100). Significant issues have been found. A water filter is strongly recommended. The city ranks #977 out of 1067 cities tested in Texas.

What contaminants are in Alice's water?

Lead was measured at 1.7 ppb (90th percentile). 2 PFAS compounds were detected. 212 violations are on record.

How is Alice's water quality grade calculated?

The grade is based on four factors: violation history (40%), lead and copper levels (25%), PFAS contamination (25%), and regulatory compliance (10%). The score is also adjusted based on how complete the available data is. See our methodology page for full details.

Do I need a water filter in Alice?

PFAS compounds have been detected. A filter with activated carbon can help reduce exposure.

Where does Alice's water come from?

Alice's water is sourced from Surface water. The city has 2 water systems serving approximately 21,054 residents.

What health violations has Alice's water system had?

Alice has 103 health-based violations on record. The most recent violation was recorded in December 2025. Health-based violations mean the water exceeded EPA maximum contaminant levels (MCLs) for a regulated substance. 60 violations remain unresolved.

How does Alice's water compare to other cities?

Alice ranks #977 out of 1067 cities in Texas (better than 8% of state cities) and #14968 out of 15744 cities nationally (5th percentile). The grade of F reflects the combined assessment of violation history, lead and copper levels, PFAS contamination, and regulatory compliance.