WaterVerge

Is St George, UT Tap Water Safe to Drink?

Graded D, with 54 unresolved violations on record. See what was cited — and what it means for your tap. What to do next ↓

3K residents served 9 water systems PWSID: UTAH27065
Overall Score
49 / 100
Violations
54 active
Last Updated
May 2026
Source
Groundwater
#142 of 177 in Utah Top 85% nationally
Private
High data confidence
Reviewed by WaterVerge Editorial Team · Last updated May 2026
DGRADE
Water Quality Grade
49/100
waterverge.com
D 49/100

St George, UT — Water Quality Report

St George's drinking water received a grade of D (49 out of 100), indicating poor water quality. The city's 9 water systems serve approximately 3,160 residents using groundwater.

Lead levels were measured at 3.8 ppb (90th percentile), well within EPA limits. PFAS testing under UCMR 5 found no detectable forever chemicals.

The system has 1282 violations on record, including 20 health-based violations. 54 remain unresolved.

Data last updated: May 2026 · Source: EPA SDWIS, UCMR 5
Analysis

What to know about St George's water

St George ranks #142 out of 177 cities in Utah for water quality, placing it among the lowest-rated in the state.

St George relies on groundwater, which is generally less vulnerable to surface contamination but can be affected by naturally occurring minerals like arsenic and nitrate, as well as agricultural and industrial runoff.

As a small community water system, St George may have fewer resources for advanced treatment technologies and infrastructure upgrades compared to larger utilities.

The system has seen 31 violations in the past five years, suggesting a pattern of compliance challenges that residents should monitor closely.

Quality Breakdown

Water quality score

See methodology →
49 out of 100 Grade D
A: 90-100
B: 74-89
C: 60-73
F: <50
How is this calculated?
Violations
0/45
F
Historical violation record including health-based and monitoring violations.
Lead & Copper
18/20
A
Lead at 3.8 ppb (90th percentile).
Contaminants
16/20
B
No PFAS compounds detected.
Compliance
10/10
A
Monitoring and reporting compliance with EPA regulations.
Source Risk
5/5
A
Water source: Groundwater.
Water Safety

Is St George, UT water safe to drink?

Concerns Identified

St George's drinking water has significant quality concerns based on EPA testing data. With a grade of D (49/100), the system has issues across multiple categories. A water filter is recommended for all residents. The city's 9 water systems serve approximately 3,160 residents using groundwater (wells).

54
Active Violations
3.8 ppb
Lead (90th %ile)
None
PFAS Detected
4 events
Disaster History

Recent water quality updates for St George

A timeline of significant water quality events, violations, and data updates.

Update
Water quality data updated

Latest EPA compliance and testing data incorporated into St George's water quality assessment. Grade: D (49/100).

Violation
1 drinking water violation recorded

Contaminants: Revised Total Coliform Rule.

Violation
1 drinking water violation recorded

Contaminants: Revised Total Coliform Rule.

Violation
1 drinking water violation recorded

Contaminants: Consumer Confidence Rule.

Disaster
SEVERE STORM AND FLOODING

Federal disaster declaration (FEMA DR-4088). Flood event — may have impacted local water infrastructure.

Disaster
SEVERE WINTER STORM AND FLOODING

Federal disaster declaration (FEMA DR-1955). Flood event — may have impacted local water infrastructure.

Key contaminant findings

Based on the most recent EPA sampling data for St George's water supply.

Lead Within Limits
Detected: 3.8 ppb Limit: 15 ppb (EPA Action Level)

Well within EPA limits.

Violation history

St George's water system has 1,282 total violations on record, including 20 health-based violations. 54 remain unresolved. 31 violations were issued in the last 5 years.

MONOtherMRMCLTTRPT
Most recent violations:
Dec 2025 Revised Total Coliform Rule Resolved
Nov 2025 Revised Total Coliform Rule Resolved
Oct 2025 Consumer Confidence Rule Open
Sep 2025 Lead and Copper Rule Open
Jul 2025 Consumer Confidence Rule Open

Flood & environmental risk

Washington County has experienced 4 federally declared disasters since 1989. Flooding and severe storms can overwhelm water treatment plants, cause sewage overflows, and introduce agricultural runoff, bacteria, and sediment into drinking water supplies. Local water sources include Fort Pearce Wash, Santa Clara River, Virgin River.

SEVERE STORM AND FLOODING
Flood FEMA DR-4088
SEVERE WINTER STORM AND FLOODING
Flood FEMA DR-1955
HURRICANE KATRINA EVACUATION
Coastal Storm FEMA DR-3223

Where does St George's water come from?

St George's drinking water comes from groundwater (wells), supplied by 9 water systems serving approximately 3,160 people. Groundwater is generally less susceptible to surface contamination but can contain naturally occurring contaminants like arsenic, radon, and nitrate. Nearby water bodies include Fort Pearce Wash (river), Santa Clara River (river), Virgin River (river).

What St George residents can do

Install a water filter

Recommended: NSF-certified water filter. This addresses the specific contaminants found in St George's water.

Request your utility's CCR

Your water utility is required to publish an annual Consumer Confidence Report (CCR) with detailed testing results. Ask for the latest copy or check your utility's website.

Flush your taps

Run cold water for 30 seconds before drinking, especially in the morning. Lead and copper leach from household plumbing when water sits in pipes.

Monitor alerts during storms

St George's area has a history of flooding. After severe weather, watch for boil water advisories from your local utility.

Data: EPA SDWIS, UCMR 5 (PFAS), FEMA, NOAA. Last updated May 2026.

Contaminant Alerts

Top contaminants to know

View all ↓
Lead (90th percentile)
Inorganic / Heavy Metal
Safe
3.8 ppb
EPA Action Level: 15 ppb · 25% of limit
Safe Level
PFAS Testing

Forever chemicals overview

National PFAS report →
30
Compounds tested
0
Detected
0
Exceed EPA MCL
Compliance Record

Violation summary

1282
Total violations
20
Health-based
54
Active / unresolved
Dec 2025
Most recent violation
Compliance Record

Violations & advisories

1282 Total
54 Active
20 Health-based
1228 Resolved
2 SNC
Violations by category
Volatile Organic Chemicals
524
Synthetic Organic Chemicals
334
Radionuclides and Revised Rad Rule
104
Inorganic Chemicals
82
Total Coliform Rule
79
Oct 2025 Active
Consumer Confidence Rule
Other Violation 0
Sep 2025 Active
Lead and Copper Rule
Monitoring & Reporting
Monitoring & Reporting 0
Jul 2025 Active
Consumer Confidence Rule
Other Violation 0
Jan 2025 Active
E. COLI
Monitoring & Reporting
Monitoring & Reporting 0
Oct 2024 Active
Consumer Confidence Rule
Other Violation 0
Jul 2024 Active
Consumer Confidence Rule
Other Violation 0
Oct 2023 Active
Lead and Copper Rule
Monitoring & Reporting
Monitoring & Reporting 0
Jan 2022 Active
Groundwater Rule
Treatment Technique
Health-Based Health 0
Jan 2022 Active
Groundwater Rule
Treatment Technique
Health-Based Health 0
Jan 2022 Active
Groundwater Rule
Treatment Technique
Health-Based Health 0
Jul 2021 Active
E. COLI
Monitoring & Reporting
Monitoring & Reporting 0
Jul 2021 Active
Consumer Confidence Rule
Other Violation 0
Jul 2021 Active
Consumer Confidence Rule
Other Violation 0
Jul 2021 Active
Consumer Confidence Rule
Other Violation 0
Jul 2021 Active
Consumer Confidence Rule
Other Violation 0
Oct 2020 Active
Lead and Copper Rule
Monitoring & Reporting
Monitoring & Reporting 0
Jul 2020 Active
E. COLI
Monitoring & Reporting
Monitoring & Reporting 0
Jul 2020 Active
Consumer Confidence Rule
Other Violation 0
Jul 2020 Active
Consumer Confidence Rule
Other Violation 0
Jul 2020 Active
Consumer Confidence Rule
Other Violation 0
Showing 20 of 1282 violations
Environmental Risk

Drought conditions

D2 — severe drought

Salt Lake County is currently in D2 (severe drought) per the U.S. Drought Monitor (week of May 5, 2026). Drought can elevate disinfection-byproduct (TTHM/HAA5) levels and taste/odor issues as utilities draw from lower reservoirs.

13
Weeks at D2+ (current streak)
20.5%
Months in D2+ (last 30y)
13
Weeks at D2+ (last 5y)

Source: U.S. Drought Monitor, updated weekly by NDMC, USDA, and NOAA.

Environmental Risk

Flood & disaster history

4
Declared disasters
Nov 2012
Most recent
Flood
Most common type

Washington County has experienced 4 federally declared disasters since 1989. Flooding and severe weather can compromise water treatment infrastructure and introduce contaminants into drinking water supplies.

Nov 2012
SEVERE STORM AND FLOODING
Flood FEMA #4088
Feb 2011
SEVERE WINTER STORM AND FLOODING
Flood FEMA #1955
Sep 2005
HURRICANE KATRINA EVACUATION
Coastal Storm FEMA #3223
Jan 1989
DIKE FAILURE & FLASH FLOODING
Flood FEMA #820

Full contaminants report

Contaminant Detected Level EPA Limit Unit Category Status
Lead (90th percentile) 3.8 15 ppb Inorganic Safe
11Cl-PF3OUdS ND HI µg/L PFAS Not Detected
4:2 FTS ND HI µg/L PFAS Not Detected
6:2 FTS ND HI µg/L PFAS Not Detected
8:2 FTS ND HI µg/L PFAS Not Detected
9Cl-PF3ONS ND HI µg/L PFAS Not Detected
ADONA ND HI µg/L PFAS Not Detected
HFPO-DA ND 0.01 µg/L PFAS Not Detected
lithium ND HI µg/L PFAS Not Detected
NEtFOSAA ND HI µg/L PFAS Not Detected
NFDHA ND HI µg/L PFAS Not Detected
NMeFOSAA ND HI µg/L PFAS Not Detected
PFBA ND HI µg/L PFAS Not Detected
PFBS ND HI µg/L PFAS Not Detected
PFDA ND HI µg/L PFAS Not Detected
PFDoA ND HI µg/L PFAS Not Detected
PFEESA ND HI µg/L PFAS Not Detected
PFHpA ND HI µg/L PFAS Not Detected
PFHpS ND HI µg/L PFAS Not Detected
PFHxA ND HI µg/L PFAS Not Detected
PFHxS ND HI µg/L PFAS Not Detected
PFMBA ND HI µg/L PFAS Not Detected
PFMPA ND HI µg/L PFAS Not Detected
PFNA ND HI µg/L PFAS Not Detected
PFOA ND 0.004 µg/L PFAS Not Detected
PFOS ND 0.004 µg/L PFAS Not Detected
PFPeA ND HI µg/L PFAS Not Detected
PFPeS ND HI µg/L PFAS Not Detected
PFTA ND HI µg/L PFAS Not Detected
PFTrDA ND HI µg/L PFAS Not Detected
PFUnA ND HI µg/L PFAS Not Detected
Data source: EPA SDWIS, UCMR 5, local utility CCR.

Lead level trend (90th percentile)

EPA action level: 15 ppb
Lead has increased by 0.8 ppb from 1993 (3.0 ppb) to 2026 (3.8 ppb).
Contaminant Rankings

See how St George compares by contaminant

Explore where St George ranks among all Utah cities for specific contaminants.

Infrastructure

Water source & infrastructure

Primary Source
Groundwater
Operator
Private
Population Served
3,160
Water Systems
9
Source breakdown
Groundwater
6
Purchased Surface Water
1
Purchased Groundwater
1
Surface Water
1
Water Source

Where St George's water comes from

Groundwater

St George's drinking water is drawn from underground aquifers through wells.

Groundwater is naturally filtered through rock and soil layers, generally requiring less treatment than surface water. However, it can contain naturally occurring contaminants like arsenic, radon, and minerals.

Agricultural activity, septic systems, and industrial operations near well fields can introduce nitrates, pesticides, and volatile organic compounds.

The system is operated by private ownership and serves approximately 3,160 people through 9 water systems.

Local Hydrology

Water bodies near St George

St George is located near 3 notable water bodies. These water bodies contribute to the regional watershed and may indirectly affect groundwater quality.

Fort Pearce Wash
river
Santa Clara River
river
Virgin River
river
Infrastructure

Water systems serving St George

System Name PWSID Population Source
DIAMOND VALLEY ACRES UTAH27065 1,340 GW
WINCHESTER HILLS WATER CO UTAH27049 950 GW
WASHINGTON COUNTY WCD - SAND HOLLOW UTAH27073 425 SWP
MOUNT AIR SUBDIVISION UTAH18134 215 GW
WASHINGTON COUNTY WCD - COTTAM UTAH27071 130 GW
EAGLES LANDING UTAH25146 50 GW
PINE VALLEY IRRIGATION CO UTAH27025 50 GW
WASHINGTON COUNTY WCD - KAYENTA WATER UTAH27085 GWP
WASHINGTON COUNTY WCD - QUAIL LAKE UTAH27094 SW
Regional Comparison

How St George compares

Full Utah rankings →

St George's score of 49/100 is on par with the average of 50/100 among major Utah cities. It outscores 7 of 10 nearby cities.

St George (this city)
49
Orem
40.7
Sandy
39.5
Lehi
44.9
Utah avg
50
Share this reportHelp others learn about their water quality
WhatsAppXFacebookLinkedInEmail

Frequently asked questions

Is St George, UT tap water safe to drink?

St George's water quality earned a grade of D (49/100). Significant issues have been found. A water filter is strongly recommended. The city ranks #142 out of 177 cities tested in Utah.

What contaminants are in St George's water?

Lead was measured at 3.8 ppb (90th percentile). No PFAS compounds were detected. 1282 violations are on record.

How is St George's water quality grade calculated?

The grade is based on four factors: violation history (40%), lead and copper levels (25%), PFAS contamination (25%), and regulatory compliance (10%). The score is also adjusted based on how complete the available data is. See our methodology page for full details.

Do I need a water filter in St George?

Based on current data, basic filtration should suffice for additional peace of mind.

Where does St George's water come from?

St George's water is sourced from Groundwater. The city has 9 water systems serving approximately 3,160 residents.

What health violations has St George's water system had?

St George has 20 health-based violations on record. The most recent violation was recorded in December 2025. Health-based violations mean the water exceeded EPA maximum contaminant levels (MCLs) for a regulated substance. 54 violations remain unresolved.

Is St George's groundwater at risk of contamination?

St George uses groundwater, which can be affected by naturally occurring contaminants like arsenic, radon, and nitrate, as well as agricultural runoff and industrial activity. The system has 1282 violations on record that may relate to groundwater quality. Groundwater systems are generally less susceptible to surface contamination but should be monitored for emerging contaminants like PFAS.

How does St George's water compare to other cities?

St George ranks #142 out of 177 cities in Utah (better than 20% of state cities) and #13329 out of 15744 cities nationally (15th percentile). The grade of D reflects the combined assessment of violation history, lead and copper levels, PFAS contamination, and regulatory compliance.