WaterVerge

Is Johnson City, KS Tap Water Safe to Drink?

Graded A- — but Strontium was detected above EPA limits. Here's what's in the water and how to remove it. What to do next ↓

1K residents served 1 water system PWSID: KS2018702
Overall Score
86.8 / 100
Violations
6 active
Last Updated
May 2026
Source
Groundwater
#43 of 323 in Kansas Top 29% nationally
Local Government
High data confidence
Reviewed by WaterVerge Editorial Team · Last updated May 2026
A-GRADE
Water Quality Grade
86.8/100
waterverge.com
A- 86.8/100

Johnson City, KS — Water Quality Report

Johnson City's drinking water received a grade of A- (86.8 out of 100), indicating good water quality. The city's 1 water system serves approximately 1,343 residents using groundwater.

Lead levels were measured at 1.1 ppb (90th percentile), well within EPA limits. This system has not yet been tested for PFAS under the EPA UCMR 5 program.

The system has 8 violations on record, including 0 health-based violations. 6 remain unresolved.

Data last updated: May 2026 · Source: EPA SDWIS, UCMR 5
Analysis

What to know about Johnson City's water

Johnson City ranks #43 out of 323 cities in Kansas for water quality, placing it above average in the state.

Johnson City relies on groundwater, which is generally less vulnerable to surface contamination but can be affected by naturally occurring minerals like arsenic and nitrate, as well as agricultural and industrial runoff.

Hexavalent chromium (chromium-6) was detected at 0.69 µg/L in UCMR 3 testing. While below California's 10 µg/L limit and with no federal MCL set, residents sensitive to this contaminant may consider reverse osmosis filtration.

As a small community water system, Johnson City may have fewer resources for advanced treatment technologies and infrastructure upgrades compared to larger utilities.

Quality Breakdown

Water quality score

See methodology →
86.8 out of 100 Grade A-
A: 90-100
B: 74-89
C: 60-73
F: <50
How is this calculated?
Violations
43.9/45
A
Historical violation record including health-based and monitoring violations.
Lead & Copper
20/20
A
Lead at 1.1 ppb (90th percentile).
Contaminants
17.9/20
B
PFAS + legacy contaminant analysis.
Compliance
0/10
F
Monitoring and reporting compliance with EPA regulations.
Source Risk
5/5
A
Water source: Groundwater.
Water Safety

Is Johnson City, KS water safe to drink?

Concerns Identified

Johnson City's drinking water has significant quality concerns based on EPA testing data. With a grade of A- (86.8/100), the system has issues across multiple categories. A water filter is recommended for all residents. The city's 1 water system serves approximately 1,343 residents using groundwater (wells).

6
Active Violations
1.1 ppb
Lead (90th %ile)
2 events
Disaster History

Recent water quality updates for Johnson City

A timeline of significant water quality events, violations, and data updates.

Update
Water quality data updated

Latest EPA compliance and testing data incorporated into Johnson City's water quality assessment. Grade: A- (86.8/100).

Violation
1 drinking water violation recorded

Contaminants: Lead and Copper Rule.

Violation
1 drinking water violation recorded

Contaminants: Coliform (TCR).

Violation
1 drinking water violation recorded

Contaminants: Consumer Confidence Rule.

Disaster
HURRICANE KATRINA EVACUATION

Federal disaster declaration (FEMA DR-3236). Hurricane event — may have impacted local water infrastructure.

Disaster
FLOODING

Federal disaster declaration (FEMA DR-201). Flood event — may have impacted local water infrastructure.

Key contaminant findings

Based on the most recent EPA sampling data for Johnson City's water supply.

Lead Within Limits
Detected: 1.1 ppb Limit: 15 ppb (EPA Action Level)

Well within EPA limits.

Violation history

Johnson City's water system has 8 total violations on record, including 0 health-based violations. 6 remain unresolved.

MROther
Most recent violations:
Dec 2016 Lead and Copper Rule Open
May 2013 Coliform (TCR) Resolved
Jul 2008 Consumer Confidence Rule Open
Apr 2008 Stage 2 Disinfectants and Disinfection Byproducts Rule Open
Jul 2001 Consumer Confidence Rule Open

Flood & environmental risk

Stanton County has experienced 2 federally declared disasters since 1965. Flooding and severe storms can overwhelm water treatment plants, cause sewage overflows, and introduce agricultural runoff, bacteria, and sediment into drinking water supplies.

HURRICANE KATRINA EVACUATION
Hurricane FEMA DR-3236
FLOODING
Flood FEMA DR-201

Where does Johnson City's water come from?

Johnson City's drinking water comes from groundwater (wells), supplied by 1 water system serving approximately 1,343 people. Groundwater is generally less susceptible to surface contamination but can contain naturally occurring contaminants like arsenic, radon, and nitrate.

What Johnson City residents can do

Install a water filter

Recommended: NSF-certified water filter. This addresses the specific contaminants found in Johnson City's water.

Request your utility's CCR

Your water utility is required to publish an annual Consumer Confidence Report (CCR) with detailed testing results. Ask for the latest copy or check your utility's website.

Data: EPA SDWIS, UCMR 5 (PFAS), FEMA, NOAA. Last updated May 2026.

Contaminant Alerts

Top contaminants to know

View all ↓
Lead (90th percentile)
Inorganic / Heavy Metal
Safe
1.1 ppb
EPA Action Level: 15 ppb · 7% of limit
Safe Level
Chromium-6 (Hexavalent Chromium)
Inorganic
Detected
0.69 µg/L
CA MCL (no federal MCL): 10 µg/L · 7% of limit
DetectedUCMR 3 Data
Strontium
Inorganic
Over HRL
2030.0 µg/L
EPA Health Ref Level: 1,500 µg/L · +20% over limit
Over HRLUCMR 3 Data
Vanadium
Inorganic
Detected
2.11 µg/L
EPA Short-term HA: 21 µg/L · 10% of limit
DetectedUCMR 3 Data
Chlorate
Disinfection Byproduct
Detected
20.9 µg/L
EPA Lifetime HA: 210 µg/L · 10% of limit
DetectedUCMR 3 Data
Molybdenum
Inorganic
Detected
17.56 µg/L
EPA Lifetime HA: 40 µg/L · 44% of limit
DetectedUCMR 3 Data
Compliance Record

Violation summary

8
Total violations
0
Health-based
6
Active / unresolved
Dec 2016
Most recent violation
Compliance Record

Violations & advisories

8 Total
6 Active
0 Health-based
2 Resolved
Violations by category
Consumer Confidence Rule
3
Total Coliform Rule
2
Lead and Copper Rule
1
Stage 2 Disinfectants and Disinfection Byproducts Rule
1
Dec 2016 Active
Lead and Copper Rule
Monitoring & Reporting
Monitoring & Reporting 0
Jul 2008 Active
Consumer Confidence Rule
Other Violation 0
Apr 2008 Active
Stage 2 Disinfectants and Disinfection Byproducts Rule
Monitoring & Reporting
Monitoring & Reporting 0
Jul 2001 Active
Consumer Confidence Rule
Other Violation 0
Oct 1999 Active
Consumer Confidence Rule
Other Violation 0
Active
Compliance Violation
Monitoring 0
May 2013 Resolved
Coliform (TCR)
Monitoring & Reporting
Monitoring & Reporting Resolved May 2013
Feb 1993 Resolved
Coliform (TCR)
Monitoring & Reporting
Monitoring & Reporting Resolved Feb 1993
Environmental Risk

Drought conditions

D3 — extreme drought

Stanton County is currently in D3 (extreme drought) per the U.S. Drought Monitor (week of May 5, 2026). Drought can elevate disinfection-byproduct (TTHM/HAA5) levels and taste/odor issues as utilities draw from lower reservoirs.

6
Weeks at D2+ (current streak)
20.2%
Months in D2+ (last 30y)
6
Weeks at D2+ (last 5y)

Source: U.S. Drought Monitor, updated weekly by NDMC, USDA, and NOAA.

Environmental Risk

Flood & disaster history

2
Declared disasters
Sep 2005
Most recent
Hurricane
Most common type

Stanton County has experienced 2 federally declared disasters since 1965. Flooding and severe weather can compromise water treatment infrastructure and introduce contaminants into drinking water supplies.

Sep 2005
HURRICANE KATRINA EVACUATION
Hurricane FEMA #3236
Jun 1965
FLOODING
Flood FEMA #201

Full contaminants report

Contaminant Detected Level EPA Limit Unit Category Status
Lead (90th percentile) 1.1 15 ppb Inorganic Safe
Data source: EPA SDWIS, UCMR 5, local utility CCR.

Lead level trend (90th percentile)

EPA action level: 15 ppb
Lead has decreased by 0.6 ppb from 2004 (1.7 ppb) to 2025 (1.1 ppb).
Contaminant Rankings

See how Johnson City compares by contaminant

Explore where Johnson City ranks among all Kansas cities for specific contaminants.

Infrastructure

Water source & infrastructure

Primary Source
Groundwater
Operator
Local Government
Population Served
1,343
Water Systems
1
Water Source

Where Johnson City's water comes from

Groundwater

Johnson City's drinking water is drawn from underground aquifers through wells.

Groundwater is naturally filtered through rock and soil layers, generally requiring less treatment than surface water. However, it can contain naturally occurring contaminants like arsenic, radon, and minerals.

Agricultural activity, septic systems, and industrial operations near well fields can introduce nitrates, pesticides, and volatile organic compounds.

The system is operated by local government ownership and serves approximately 1,343 people through 1 water system.

Infrastructure

Water systems serving Johnson City

System Name PWSID Population Source
JOHNSON CITY, CITY OF KS2018702 1,343 GW
Regional Comparison

How Johnson City compares

Full Kansas rankings →

Johnson City's score of 86.8/100 is above the average of 62/100 among major Kansas cities. It outscores 10 of 10 nearby cities.

Johnson City (this city)
86.8
Wichita
83.9
Olathe
79.5
Topeka
39.3
Lawrence
74.6
Kansas avg
62
City Profile

About Johnson City, KS

Economic Profile
$65,308
Median Income
$67,846
Median Home Value
$943/mo
Median Rent
3.4%
Unemployment
Community
41.9
Median Age
238
People / sq mi
10.6%
College Educated
82.7%
Homeownership
Share this reportHelp others learn about their water quality
WhatsAppXFacebookLinkedInEmail

Frequently asked questions

Is Johnson City, KS tap water safe to drink?

Johnson City's water quality earned a grade of A- (86.8/100). The water generally meets EPA standards and is considered safe for consumption. The city ranks #43 out of 323 cities tested in Kansas.

What contaminants are in Johnson City's water?

Lead was measured at 1.1 ppb (90th percentile). 8 violations are on record.

How is Johnson City's water quality grade calculated?

The grade is based on four factors: violation history (40%), lead and copper levels (25%), PFAS contamination (25%), and regulatory compliance (10%). The score is also adjusted based on how complete the available data is. See our methodology page for full details.

Do I need a water filter in Johnson City?

Based on current data, basic filtration should suffice for additional peace of mind.

Where does Johnson City's water come from?

Johnson City's water is sourced from Groundwater. The city has 1 water system serving approximately 1,343 residents.

Is Johnson City's groundwater at risk of contamination?

Johnson City uses groundwater, which can be affected by naturally occurring contaminants like arsenic, radon, and nitrate, as well as agricultural runoff and industrial activity. The system has 8 violations on record that may relate to groundwater quality. Groundwater systems are generally less susceptible to surface contamination but should be monitored for emerging contaminants like PFAS.

How does Johnson City's water compare to other cities?

Johnson City ranks #43 out of 323 cities in Kansas (better than 87% of state cities) and #4468 out of 15744 cities nationally (72th percentile). The grade of A- reflects the combined assessment of violation history, lead and copper levels, PFAS contamination, and regulatory compliance.

Does Johnson City's small water system affect quality?

Johnson City's system serves approximately 1,343 residents. Small community water systems (under 3,300 people) may have fewer financial resources for infrastructure upgrades and advanced treatment technologies. However, they are held to the same EPA drinking water standards as larger systems. This system has 8 violations on record.