01The verdict: is Gilman water safe?
Based on EPA testing data, Gilman's tap water is generally safe to drink. The water system earned a grade of A+ (95.9/100), meeting federal drinking water standards across key contaminant categories. The city's 1 water system serves approximately 582 residents using groundwater (wells).
Nothing over a legal limit
Every contaminant measured in Gilman's water is within its EPA limit, and no violations are unresolved.
See the testing ↓Lead is well under the limit
90th-percentile lead is 0.0 ppb — beneath the 15 ppb federal action level and under the 5 ppb watch threshold.
See the trend ↓A flood-prone service area
7 federal disaster declarations on record. After severe weather, watch for boil-water advisories.
See the risk factors ↓Gilman's drinking water received a grade of A+ (95.9 out of 100), indicating excellent water quality. The city's 1 water system serves approximately 582 residents using purchased ground water.
Lead levels were measured at 0.0 ppb (90th percentile), well within EPA limits. This system has not yet been tested for PFAS under the EPA UCMR 5 program. The system has 8 violations on record, including 7 health-based violations. All violations have been resolved.
Gilman ranks #4 out of 430 cities in Iowa for water quality, placing it one of the best in the state. Gilman purchases its water from a regional wholesaler, meaning quality depends on both the supplier's treatment and the local distribution system's condition. As a small community water system, Gilman may have fewer resources for advanced treatment technologies and infrastructure upgrades compared to larger utilities.
02What's in Gilman's water
Every contaminant flagged in Gilman, on one shared scale: distance to its own legal limit. The red line is the limit — anything past it is out of compliance, and the closer a bar gets, the less headroom the system has.
Full contaminants report
| Contaminant | Detected Level | EPA Limit | Unit | Category | Status |
|---|---|---|---|---|---|
| Lead (90th percentile) LeadHeavy Metal A toxic heavy metal that can leach into drinking water from older pipes, solder, and fixtures. No amount of lead in water is considered safe. Health EffectsBrain and nervous system damage in children, kidney damage, high blood pressure, and reproductive problems in adults. EPA Limit15 ppb action level Common SourcesCorrosion of lead pipes, lead solder, brass faucets, and household plumbing. | 0.0 | 15 | ppb | Inorganic | Safe |
Cities ranked by 90th-percentile lead PF PFAS in Iowa
Cities ranked by compounds detected Cu Copper in Iowa
Cities ranked by 90th-percentile copper
03Gilman's ten-year track record
Each box is one year. A green check means no EPA violations; a numbered badge counts that year's violations — red if any were health-based, amber if they were monitoring or paperwork issues. The system has 8 violations on record, including 7 health-based violations. All violations have been resolved.
All ten of the last ten years were clean — no EPA violations recorded for Gilman.
▼ Down 0 ppb since 1993. Latest reading: 0 ppb (2024) — 0% of the action level. Sampled at higher-risk homes (90th percentile).
04Where Gilman's water comes from
Gilman purchases its water supply from a regional wholesale provider rather than treating raw water directly.
Purchased Groundwater
Water is bought from a regional wholesaler; quality starts at the supplier's intake and treatment.
Wholesale supplier
Primary treatment happens at the wholesaler; the local utility maintains disinfectant residual in its pipes.
1 system
1 water system, operated under local government ownership.
582 people
Residents served across Gilman's service area.
Water quality depends on both the wholesaler's treatment standards and the condition of Gilman's local distribution pipes and storage facilities. Purchased water systems are common in suburban areas and smaller communities that lack the infrastructure for independent treatment. The system is operated by local government ownership and serves approximately 582 people through 1 water system.
| System name | PWSID | Population | Source |
|---|---|---|---|
| GILMAN WATER SUPPLY | IA6436087 | 582 | Purchased Groundwater |
05Pressure on Gilman's watershed
Outside forces that shape what reaches the treatment plant. None of these is a verdict on the tap by itself — but each adds pressure worth knowing about.
Flood & storm history
7 federal disaster declarations on record for Jasper County. Flooding and severe storms can overwhelm treatment plants, cause sewage overflows, and push runoff into supplies.
06How Gilman compares
Scores for nearby Iowa cities on one line, with the average marked.
dashed line = Iowa average (72/100)
Gilman scores 95.9/100 — above the Iowa average of 72/100. It outscores 10 of 10 nearby cities. Full Iowa rankings →
85 / 100CDavenport, IA
55 / 100DCedar Rapids, IA
45.5 / 100FIowa City, IA
42 / 100BAmes, IA
81.5 / 100BSioux City, IA
77.3 / 100
Compare all cities in the county — grades, violations, and contaminant data side by side.→
07What to do at home
Steps matched to what testing actually found in Gilman's water — not generic advice.
A basic carbon filter still helps
Gilman's water meets federal standards, but a simple carbon filter improves taste and adds a margin of safety against short-term issues.
Compare tested filters →Read your utility's annual report
Every utility must publish a yearly Consumer Confidence Report with its own testing results. It pairs well with the independent data on this page.
How to read a CCR →Watch for Gilman alerts
This area has a history of flood declarations — after severe weather, watch for boil-water advisories from the utility, and check the live alerts on this page.
All water alerts →Frequently asked questions
Is Gilman, IA tap water safe to drink?
Gilman's water quality earned a grade of A+ (95.9/100). The water generally meets EPA standards and is considered safe for consumption. The city ranks #4 out of 430 cities tested in Iowa.
What contaminants are in Gilman's water?
Lead was measured at 0.0 ppb (90th percentile). 8 violations are on record.
How is Gilman's water quality grade calculated?
The grade is based on four factors: violation history (40%), lead and copper levels (25%), PFAS contamination (25%), and regulatory compliance (10%). The score is also adjusted based on how complete the available data is. See our methodology page for full details.
Do I need a water filter in Gilman?
Based on current data, basic filtration should suffice for additional peace of mind.
Where does Gilman's water come from?
Gilman's water is sourced from Purchased ground water. The city has 1 water system serving approximately 582 residents.
What health violations has Gilman's water system had?
Gilman has 7 health-based violations on record. The most recent violation was recorded in May 1999. Health-based violations mean the water exceeded EPA maximum contaminant levels (MCLs) for a regulated substance. All health violations have been resolved.
Is Gilman's groundwater at risk of contamination?
Gilman uses groundwater, which can be affected by naturally occurring contaminants like arsenic, radon, and nitrate, as well as agricultural runoff and industrial activity. The system has 8 violations on record that may relate to groundwater quality. Groundwater systems are generally less susceptible to surface contamination but should be monitored for emerging contaminants like PFAS.
How does Gilman's water compare to other cities?
Gilman ranks #4 out of 430 cities in Iowa (better than 99% of state cities) and #261 out of 15382 cities nationally (98th percentile). The grade of A+ reflects the combined assessment of violation history, lead and copper levels, PFAS contamination, and regulatory compliance.
Does Gilman's small water system affect quality?
Gilman's system serves approximately 582 residents. Small community water systems (under 3,300 people) may have fewer financial resources for infrastructure upgrades and advanced treatment technologies. However, they are held to the same EPA drinking water standards as larger systems. This system has 8 violations on record.