Skip to main content
WaterVerge

Water quality report · updated Jul 2026

Is Belton, MO Tap Water Safe to Drink?

Graded B-, with 29 unresolved violations on record. See what was cited — and what it means for your tap. What to do ↓

0 contaminants over a legal limit
0.0 ppb lead, 90th percentile · low
29 unresolved violations
31K people served by 7 water systems

PWSID MO1010061 · high data confidence · local government utility

Reviewed by WaterVerge Editorial Team · Last updated July 2026
B 71.5 / 100

#379 of 487Missouri cities
How we grade →

01The verdict: is Belton water safe?

Belton's drinking water has significant quality concerns based on EPA testing data. With a grade of B- (71.5/100), the system has issues across multiple categories. A water filter is recommended for all residents. The city's 7 water systems serve approximately 30,531 residents using surface water (rivers, lakes, or reservoirs).

The concern

29 unresolved violations on record

EPA records show open compliance items for this system. Most are administrative, but unresolved items are worth watching.

See what was cited ↓
The good news

Lead is well under the limit

90th-percentile lead is 0.0 ppb — beneath the 15 ppb federal action level and under the 5 ppb watch threshold.

See the trend ↓
Keep watching

lithium is approaching its limit

Measured at 53.7000 µg/L — 120% of the 0.004 µg/L limit. Within the rules, but with less headroom than you'd want.

See the ledger ↓

Belton's drinking water received a grade of B- (71.5 out of 100), indicating fair water quality. The city's 7 water systems serve approximately 30,531 residents using purchased surface water.

Lead levels were measured at 0.0 ppb (90th percentile), well within EPA limits. UCMR 5 testing detected 2 PFAS compounds in the water supply. The system has 64 violations on record, including 5 health-based violations. 29 remain unresolved.

Belton ranks #379 out of 487 cities in Missouri for water quality, placing it among the lowest-rated in the state. The city draws from surface water sources, which are more susceptible to seasonal runoff and agricultural contamination, requiring extensive multi-barrier treatment including coagulation, filtration, and disinfection. PFAS compounds were detected in testing, though levels remain within current EPA limits. Residents seeking extra precaution may consider an activated carbon or reverse osmosis filter. Hexavalent chromium (chromium-6) was detected at 6.20 µg/L in UCMR 3 testing. While below California's 10 µg/L limit and with no federal MCL set, residents sensitive to this contaminant may consider reverse osmosis filtration. The system has seen 8 violations in the past five years, suggesting a pattern of compliance challenges that residents should monitor closely.

How the 71.5/100 breaks down Methodology →
ViolationsHistorical violation record including health-based and monitoring violations.
27 / 45C
Lead & CopperLead at 0.0 ppb (90th percentile).
20 / 20A
Contaminants2 PFAS compounds detected.
17.4 / 20B
ComplianceMonitoring and reporting compliance with EPA regulations.
3 / 10F
Source RiskWater source: Purchased surface water.
4 / 5B

02What's in Belton's water

Every contaminant flagged in Belton, on one shared scale: distance to its own legal limit. The red line is the limit — anything past it is out of compliance, and the closer a bar gets, the less headroom the system has.

9 detections · sorted by % of legal limit
Over the limit Elevated — watch Within limits
0 50% LEGAL LIMIT 150%
lithium PFAS / Forever Chemical
53.7000 µg/L 120% of limit
Lithium Inorganic
53.7 µg/L 90% of limit
Strontium Inorganic
243.0 µg/L 16% of limit
Vanadium Inorganic
2.74 µg/L 13% of limit
Molybdenum Inorganic
3.34 µg/L 8% of limit
Manganese Inorganic
0.5 µg/L 1% of limit
38 contaminants tested under EPA SDWIS, LCR and UCMR programs · 10 detected Contaminants without a federal MCL are shown against the strictest state or advisory level named in each row.

Full contaminants report

Contaminant Detected Level EPA Limit Unit Category Status
Lead (90th percentile) 0.0 15 ppb Inorganic Safe
11Cl-PF3OUdS ND HI µg/L PFAS Not Detected
4:2 FTS ND HI µg/L PFAS Not Detected
6:2 FTS ND HI µg/L PFAS Not Detected
8:2 FTS ND HI µg/L PFAS Not Detected
9Cl-PF3ONS ND HI µg/L PFAS Not Detected
ADONA ND HI µg/L PFAS Not Detected
HFPO-DA ND 0.01 µg/L PFAS Not Detected
lithium 53.700 HI µg/L PFAS Detected
NEtFOSAA ND HI µg/L PFAS Not Detected
NFDHA ND HI µg/L PFAS Not Detected
NMeFOSAA ND HI µg/L PFAS Not Detected
PFBA 0.006 HI µg/L PFAS Detected
PFBS ND HI µg/L PFAS Not Detected
PFDA ND HI µg/L PFAS Not Detected
PFDoA ND HI µg/L PFAS Not Detected
PFEESA ND HI µg/L PFAS Not Detected
PFHpA ND HI µg/L PFAS Not Detected
PFHpS ND HI µg/L PFAS Not Detected
PFHxA ND HI µg/L PFAS Not Detected
PFHxS ND HI µg/L PFAS Not Detected
PFMBA ND HI µg/L PFAS Not Detected
PFMPA ND HI µg/L PFAS Not Detected
PFNA ND HI µg/L PFAS Not Detected
PFOA ND 0.004 µg/L PFAS Not Detected
PFOS ND 0.004 µg/L PFAS Not Detected
PFPeA ND HI µg/L PFAS Not Detected
PFPeS ND HI µg/L PFAS Not Detected
PFTA ND HI µg/L PFAS Not Detected
PFTrDA ND HI µg/L PFAS Not Detected
PFUnA ND HI µg/L PFAS Not Detected
Data source: EPA SDWIS, UCMR 5, local utility CCR.

03Belton's ten-year track record

Each box is one year. A green check means no EPA violations; a numbered badge counts that year's violations — red if any were health-based, amber if they were monitoring or paperwork issues. The system has 64 violations on record, including 5 health-based violations. 29 remain unresolved.

5 of the last ten years were clean. The numbered years had EPA violations — red when any were health-based, amber when they were paperwork or missed-testing issues.

10 monitoring & paperwork 7 still unresolved
PFAS2 PFAS "forever chemical" compounds detectedDetected at levels within current EPA limits. PFAS persist indefinitely in the environment.
UpdateWater quality data updatedLatest EPA compliance and testing data incorporated into Belton's water quality assessment. Grade: B- (71.5/100).
Violation2 drinking water violations recordedContaminants: Lead and Copper Rule, Revised Total Coliform Rule.Open
Violation3 drinking water violations recordedContaminants: LEAD AND COPPER RULE REVISIONS, Consumer Confidence Rule.Open
Violation1 drinking water violation recordedContaminants: Revised Total Coliform Rule.Resolved
DisasterHURRICANE KATRINA EVACUATIONFederal disaster declaration (FEMA DR-3232). Hurricane event — may have impacted local water infrastructure.
Lead, 90th percentileppb · lower is better
05101520EPA action level · 15 ppb1992 — 4.3 ppb1993 — 0 ppb1994 — 0 ppb1995 — 0 ppb1998 — 0 ppb1999 — 0 ppb2000 — 0 ppb2001 — 0 ppb2002 — 0.94 ppb2004 — 5.9 ppb2005 — 6.0 ppb2007 — 0 ppb2010 — 5.9 ppb2011 — 0 ppb2012 — 1.2 ppb2013 — 0 ppb2014 — 0 ppb2015 — 0 ppb2016 — 0 ppb2017 — 0 ppb2018 — 2.6 ppb2019 — 0 ppb2020 — 0.79 ppb2021 — 0 ppb2022 — 0 ppb2023 — 0 ppb2024 — 0 ppb2025 — 0 ppb4.30199220002010201620222025

Down 4.3 ppb since 1992. Latest reading: 0 ppb (2025) — 0% of the action level. Sampled at higher-risk homes (90th percentile).

04Where Belton's water comes from

Belton's drinking water comes primarily from surface water sources such as rivers, lakes, or reservoirs.

Source

Purchased Surface Water

Rivers, lakes, or reservoirs — more exposed to runoff, agriculture, and seasonal swings than groundwater.

Treatment

Wholesale supplier

Multi-barrier treatment: coagulation, sedimentation, filtration, and disinfection to meet EPA standards.

Distribution

7 systems

7 water systems, operated under local government ownership.

Delivery

30,531 people

Residents served across Belton's service area.

Surface water systems require multi-stage treatment including coagulation, sedimentation, filtration, and disinfection to meet EPA Safe Drinking Water Act standards. These sources can be impacted by seasonal changes, stormwater runoff, upstream agriculture, and industrial discharge. The system is operated by local government ownership and serves approximately 30,531 people through 7 water systems.

System namePWSIDPopulationSource
BELTON PWS MO1010061 23,598 Purchased Surface Water
CASS COUNTY PWSD 2 MO1024114 4,650 Purchased Surface Water
NW CASS COUNTY WATER RESOURCE DISTRICT MO1036172 938 Purchased Surface Water
SOUTHFORK MHP MO1048442 795 Purchased Surface Water
CROWN MHP MO1041618 300 Purchased Surface Water
PICKERING PLACE MO1031250 250 Purchased Surface Water
CASS COUNTY PWSD 8 MO1024119 198 Purchased Surface Water

Water bodies near Belton

Blue R Nr Stanley · river Blue R · river Blue River At Blue Ridge Blvd Ext In Kc · river Indian C · river Tomahawk C Nr Overland Park · river

As a surface-water system, these water bodies may directly influence Belton's drinking water supply.

05Pressure on Belton's watershed

Outside forces that shape what reaches the treatment plant. None of these is a verdict on the tap by itself — but each adds pressure worth knowing about.

Industrial discharge

Present — monitored

5 facilities within 10 miles reported 0 lb released to surface water in the latest EPA Toxics Release Inventory. Proximity doesn't equal tap contamination — treatment and hydrology decide — but it's pressure on the watershed.

ROM 0 lb · 0.6 mi
SIKA CORP 0 lb · 3.6 mi
PRIER PRODUCTS INC. 0 lb · 3.8 mi
+ 2 more facilities

Flood & storm history

Recurring — declared disasters

4 federal disaster declarations on record for Cass County. Flooding and severe storms can overwhelm treatment plants, cause sewage overflows, and push runoff into supplies.

HURRICANE KATRINA EVACUATION Sep 2005 · DR-3232
SEVERE STORMS & FLOODING Jul 1993 · DR-995
SEVERE STORMS & FLOODING Oct 1986 · DR-779

06How Belton compares

Scores for nearby Missouri cities on one line, with the average marked.

Kansas City
79.2 · B
Chesterfield
74.8 · B-
Belton (this city)
71.5 · B-
Columbia
61.4 · C
O Fallon
43.4 · F
Springfield
37.1 · F

dashed line = Missouri average (67/100)

Belton scores 71.5/100on par with the Missouri average of 67/100. It outscores 4 of 10 nearby cities. Full Missouri rankings →

Cass water quality rankings
Compare all cities in the county — grades, violations, and contaminant data side by side.

07What to do at home

Steps matched to what testing actually found in Belton's water — not generic advice.

Because of pfas

Filter drinking & cooking water

Activated carbon or reverse osmosis filter. 2 PFAS compounds detected

Compare tested filters →
Know your report

Read your utility's annual report

Every utility must publish a yearly Consumer Confidence Report with its own testing results. It pairs well with the independent data on this page.

How to read a CCR →
Stay informed

Watch for Belton alerts

This area has a history of flood declarations — after severe weather, watch for boil-water advisories from the utility, and check the live alerts on this page.

All water alerts →

Frequently asked questions

Is Belton, MO tap water safe to drink?

Belton's water quality earned a grade of B- (71.5/100). Some concerns have been identified. Consider a water filter for an extra layer of protection. The city ranks #379 out of 487 cities tested in Missouri.

What contaminants are in Belton's water?

Lead was measured at 0.0 ppb (90th percentile). 2 PFAS compounds were detected. 64 violations are on record.

How is Belton's water quality grade calculated?

The grade is based on four factors: violation history (40%), lead and copper levels (25%), PFAS contamination (25%), and regulatory compliance (10%). The score is also adjusted based on how complete the available data is. See our methodology page for full details.

Do I need a water filter in Belton?

PFAS compounds have been detected. A filter with activated carbon can help reduce exposure.

Where does Belton's water come from?

Belton's water is sourced from Purchased surface water. The city has 7 water systems serving approximately 30,531 residents.

What health violations has Belton's water system had?

Belton has 5 health-based violations on record. The most recent violation was recorded in December 2025. Health-based violations mean the water exceeded EPA maximum contaminant levels (MCLs) for a regulated substance. 29 violations remain unresolved.

How does Belton's water compare to other cities?

Belton ranks #379 out of 487 cities in Missouri (better than 22% of state cities) and #10385 out of 15382 cities nationally (33th percentile). The grade of B- reflects the combined assessment of violation history, lead and copper levels, PFAS contamination, and regulatory compliance.

Share this reportHelp others learn about their water quality
WhatsAppXFacebookLinkedInEmail
About Belton, MO: Median household income $68,030 · median home value $174,129 · median age 35.7 · 62.2% homeowners · 25.5% college educated. Service area: 1 ZIP code across Cass.
Show ZIP codes 64012
Sources: EPA SDWIS & ECHO · UCMR 3–5 · Lead & Copper Rule samples · EPA TRI · U.S. Drought Monitor · FEMA declarations. Data last updated Jul 2026. Analysis by the WaterVerge Editorial Team · methodology.