Skip to main content
WaterVerge

Water quality report · updated Jul 2026

Is Antlers, OK Tap Water Safe to Drink?

Graded D+, with 9 unresolved violations on record. See what was cited — and what it means for your tap. What to do ↓

0 contaminants over a legal limit
3.3 ppb lead, 90th percentile · low
9 unresolved violations
7K people served by 2 water systems

PWSID OK1010318 · high data confidence · local government utility

Reviewed by WaterVerge Editorial Team · Last updated July 2026
D 52 / 100

#178 of 357Oklahoma cities
How we grade →

01The verdict: is Antlers water safe?

Antlers's drinking water has significant quality concerns based on EPA testing data. With a grade of D+ (52/100), the system has issues across multiple categories. A water filter is recommended for all residents. The city's 2 water systems serve approximately 7,372 residents using surface water (rivers, lakes, or reservoirs).

The concern

9 unresolved violations on record

EPA records show open compliance items for this system. Most are administrative, but unresolved items are worth watching.

See what was cited ↓
The good news

Lead is well under the limit

90th-percentile lead is 3.3 ppb — beneath the 15 ppb federal action level and under the 5 ppb watch threshold.

See the trend ↓
Keep watching

81 violations in the last five years

Recent compliance history is the best predictor of future problems — the year-by-year record is below.

See the record ↓

Antlers's drinking water received a grade of D+ (52 out of 100), indicating poor water quality. The city's 2 water systems serve approximately 7,372 residents using surface water.

Lead levels were measured at 3.3 ppb (90th percentile), well within EPA limits. PFAS testing under UCMR 5 found no detectable forever chemicals. The system has 255 violations on record, including 229 health-based violations. 9 remain unresolved.

Antlers ranks #178 out of 357 cities in Oklahoma for water quality, placing it mid-range in the state. The city draws from surface water sources, which are more susceptible to seasonal runoff and agricultural contamination, requiring extensive multi-barrier treatment including coagulation, filtration, and disinfection. The system has seen 81 violations in the past five years, suggesting a pattern of compliance challenges that residents should monitor closely.

How the 52/100 breaks down Methodology →
ViolationsHistorical violation record including health-based and monitoring violations.
0 / 45F
Lead & CopperLead at 3.3 ppb (90th percentile).
18 / 20A
ContaminantsNo PFAS compounds detected.
20 / 20A
ComplianceMonitoring and reporting compliance with EPA regulations.
10 / 10A
Source RiskWater source: Surface water.
4 / 5B

02What's in Antlers's water

Every contaminant flagged in Antlers, on one shared scale: distance to its own legal limit. The red line is the limit — anything past it is out of compliance, and the closer a bar gets, the less headroom the system has.

1 detection · sorted by % of legal limit
Over the limit Elevated — watch Within limits
0 50% LEGAL LIMIT 150%
31 contaminants tested under EPA SDWIS, LCR and UCMR programs · 1 detected

Full contaminants report

Contaminant Detected Level EPA Limit Unit Category Status
Lead (90th percentile) 3.3 15 ppb Inorganic Safe
11Cl-PF3OUdS ND HI µg/L PFAS Not Detected
4:2 FTS ND HI µg/L PFAS Not Detected
6:2 FTS ND HI µg/L PFAS Not Detected
8:2 FTS ND HI µg/L PFAS Not Detected
9Cl-PF3ONS ND HI µg/L PFAS Not Detected
ADONA ND HI µg/L PFAS Not Detected
HFPO-DA ND 0.01 µg/L PFAS Not Detected
lithium ND HI µg/L PFAS Not Detected
NEtFOSAA ND HI µg/L PFAS Not Detected
NFDHA ND HI µg/L PFAS Not Detected
NMeFOSAA ND HI µg/L PFAS Not Detected
PFBA ND HI µg/L PFAS Not Detected
PFBS ND HI µg/L PFAS Not Detected
PFDA ND HI µg/L PFAS Not Detected
PFDoA ND HI µg/L PFAS Not Detected
PFEESA ND HI µg/L PFAS Not Detected
PFHpA ND HI µg/L PFAS Not Detected
PFHpS ND HI µg/L PFAS Not Detected
PFHxA ND HI µg/L PFAS Not Detected
PFHxS ND HI µg/L PFAS Not Detected
PFMBA ND HI µg/L PFAS Not Detected
PFMPA ND HI µg/L PFAS Not Detected
PFNA ND HI µg/L PFAS Not Detected
PFOA ND 0.004 µg/L PFAS Not Detected
PFOS ND 0.004 µg/L PFAS Not Detected
PFPeA ND HI µg/L PFAS Not Detected
PFPeS ND HI µg/L PFAS Not Detected
PFTA ND HI µg/L PFAS Not Detected
PFTrDA ND HI µg/L PFAS Not Detected
PFUnA ND HI µg/L PFAS Not Detected
Data source: EPA SDWIS, UCMR 5, local utility CCR.

03Antlers's ten-year track record

Each box is one year. A green check means no EPA violations; a numbered badge counts that year's violations — red if any were health-based, amber if they were monitoring or paperwork issues. The system has 255 violations on record, including 229 health-based violations. 9 remain unresolved.

1 of the last ten years was clean. The numbered years had EPA violations — red when any were health-based, amber when they were paperwork or missed-testing issues.

105 health-based in 10 yrs 9 monitoring & paperwork 6 still unresolved
UpdateWater quality data updatedLatest EPA compliance and testing data incorporated into Antlers's water quality assessment. Grade: D+ (52/100).
Violation2 drinking water violations recorded2 health-based. Contaminants: TTHM, Total Haloacetic Acids (HAA5).Resolved
Violation2 drinking water violations recorded2 health-based. Contaminants: TTHM, Total Haloacetic Acids (HAA5).Resolved
Violation4 drinking water violations recorded4 health-based. Contaminants: TTHM, Total Haloacetic Acids (HAA5).Resolved
DisasterSEVERE STORMS, TORNADOES, AND FLOODINGFederal disaster declaration (FEMA DR-1754). Flood event — may have impacted local water infrastructure.
DisasterHURRICANE KATRINA EVACUATIONFederal disaster declaration (FEMA DR-3219). Hurricane event — may have impacted local water infrastructure.
Lead, 90th percentileppb · lower is better
05101520EPA action level · 15 ppb1993 — 0 ppb1995 — 0 ppb1998 — 0 ppb1999 — 0 ppb2001 — 0 ppb2002 — 0 ppb2003 — 0 ppb2005 — 0 ppb2006 — 0 ppb2008 — 7.2 ppb2009 — 0 ppb2011 — 13 ppb2012 — 6.0 ppb2014 — 6.4 ppb2015 — 3 ppb2017 — 6.7 ppb2018 — 1.9 ppb2020 — 2.2 ppb2021 — 1.3 ppb2023 — 8.1 ppb2024 — 3.3 ppb3.319932002200920172024

Up 3.3 ppb since 1993. Latest reading: 3.3 ppb (2024) — 22% of the action level. Sampled at higher-risk homes (90th percentile).

04Where Antlers's water comes from

Antlers's drinking water comes primarily from surface water sources such as rivers, lakes, or reservoirs.

Source

Surface Water

Rivers, lakes, or reservoirs — more exposed to runoff, agriculture, and seasonal swings than groundwater.

Treatment

Local treatment

Multi-barrier treatment: coagulation, sedimentation, filtration, and disinfection to meet EPA standards.

Distribution

2 systems

2 water systems, operated under local government ownership.

Delivery

7,372 people

Residents served across Antlers's service area.

Surface water systems require multi-stage treatment including coagulation, sedimentation, filtration, and disinfection to meet EPA Safe Drinking Water Act standards. These sources can be impacted by seasonal changes, stormwater runoff, upstream agriculture, and industrial discharge. The system is operated by local government ownership and serves approximately 7,372 people through 2 water systems.

System namePWSIDPopulationSource
PUSHMATAHA CO. RWD #3 OK1010318 4,825 Surface Water
ANTLERS PWA OK1010302 2,547 Surface Water

Water bodies near Antlers

Kiamichi River Near Antlers · river

As a surface-water system, these water bodies may directly influence Antlers's drinking water supply.

05Pressure on Antlers's watershed

Outside forces that shape what reaches the treatment plant. None of these is a verdict on the tap by itself — but each adds pressure worth knowing about.

Industrial discharge

Present — monitored

1 facility within 10 miles reported 0 lb released to surface water in the latest EPA Toxics Release Inventory. Proximity doesn't equal tap contamination — treatment and hydrology decide — but it's pressure on the watershed.

JULIAN LUMBER CO INC 0 lb · 0.3 mi

Flood & storm history

Recurring — declared disasters

4 federal disaster declarations on record for Pushmataha County. Flooding and severe storms can overwhelm treatment plants, cause sewage overflows, and push runoff into supplies.

SEVERE STORMS, TORNADOES, AND FLOODING May 2008 · DR-1754
HURRICANE KATRINA EVACUATION Sep 2005 · DR-3219
SEVERE STORMS & FLOODING Jan 1972 · DR-317

06How Antlers compares

Scores for nearby Oklahoma cities on one line, with the average marked.

Antlers (this city)
52 · D+
Tulsa
48.5 · D
Lawton
44.4 · F
Broken Arrow
43.9 · F
Oklahoma City
38.6 · F
Norman
38.4 · F

dashed line = Oklahoma average (45/100)

Antlers scores 52/100above the Oklahoma average of 45/100. It outscores 9 of 10 nearby cities. Full Oklahoma rankings →

Pushmataha water quality rankings
Compare all cities in the county — grades, violations, and contaminant data side by side.

07What to do at home

Steps matched to what testing actually found in Antlers's water — not generic advice.

Extra protection

A basic carbon filter still helps

Antlers's water meets federal standards, but a simple carbon filter improves taste and adds a margin of safety against short-term issues.

Compare tested filters →
Because lead was detected

Flush taps & check your service line

Lead leaches from pipes as water sits. Run cold water 30 seconds before drinking (especially mornings), and ask the utility whether your address still has a lead service line.

Lead risks explained →
Stay informed

Watch for Antlers alerts

This area has a history of flood declarations — after severe weather, watch for boil-water advisories from the utility, and check the live alerts on this page.

All water alerts →

Frequently asked questions

Is Antlers, OK tap water safe to drink?

Antlers's water quality earned a grade of D+ (52/100). Significant issues have been found. A water filter is strongly recommended. The city ranks #178 out of 357 cities tested in Oklahoma.

What contaminants are in Antlers's water?

Lead was measured at 3.3 ppb (90th percentile). No PFAS compounds were detected. 255 violations are on record.

How is Antlers's water quality grade calculated?

The grade is based on four factors: violation history (40%), lead and copper levels (25%), PFAS contamination (25%), and regulatory compliance (10%). The score is also adjusted based on how complete the available data is. See our methodology page for full details.

Do I need a water filter in Antlers?

Based on current data, basic filtration should suffice for additional peace of mind.

Where does Antlers's water come from?

Antlers's water is sourced from Surface water. The city has 2 water systems serving approximately 7,372 residents.

What health violations has Antlers's water system had?

Antlers has 229 health-based violations on record. The most recent violation was recorded in July 2025. Health-based violations mean the water exceeded EPA maximum contaminant levels (MCLs) for a regulated substance. 9 violations remain unresolved.

How does Antlers's water compare to other cities?

Antlers ranks #178 out of 357 cities in Oklahoma (better than 50% of state cities) and #12571 out of 15382 cities nationally (18th percentile). The grade of D+ reflects the combined assessment of violation history, lead and copper levels, PFAS contamination, and regulatory compliance.

Share this reportHelp others learn about their water quality
WhatsAppXFacebookLinkedInEmail
About Antlers, OK: Antlers is a city in and the county seat of Pushmataha County, Oklahoma, United States. The population was 2,221 as of the 2020 United States census. The town was named for a kind of tree that becomes festooned with antlers shed by deer, and is taken as a sign of the location of a spring frequented by deer. Median household income $27,798 · median home value $86,379 · median age 36.7 · 53.9% homeowners · 14.5% college educated. Wikipedia → Service area: 1 ZIP code across Pushmataha.
Show ZIP codes 74523
Sources: EPA SDWIS & ECHO · UCMR 3–5 · Lead & Copper Rule samples · EPA TRI · U.S. Drought Monitor · FEMA declarations. Data last updated Jul 2026. Analysis by the WaterVerge Editorial Team · methodology.