Is Acme, WA Tap Water Safe to Drink?
Graded A- — but Copper was detected above EPA limits. Here's what's in the water and how to remove it. What to do next ↓
85.8/100
waterverge.com Acme, WA — Water Quality Report
Acme's drinking water received a grade of A- (85.8 out of 100), indicating good water quality. The city's 2 water systems serve approximately 666 residents using groundwater.
Lead levels were measured at 0.0 ppb (90th percentile), well within EPA limits. This system has not yet been tested for PFAS under the EPA UCMR 5 program.
The system has 32 violations on record, including 4 health-based violations. 5 remain unresolved.
What to know about Acme's water
Acme ranks #92 out of 294 cities in Washington for water quality, placing it mid-range in the state.
Acme relies on groundwater, which is generally less vulnerable to surface contamination but can be affected by naturally occurring minerals like arsenic and nitrate, as well as agricultural and industrial runoff.
As a small community water system, Acme may have fewer resources for advanced treatment technologies and infrastructure upgrades compared to larger utilities.
Water quality score
See methodology →Is Acme, WA water safe to drink?
Acme's drinking water has significant quality concerns based on EPA testing data. With a grade of A- (85.8/100), the system has issues across multiple categories. A water filter is recommended for all residents. The city's 2 water systems serve approximately 666 residents using groundwater (wells).
Recent water quality updates for Acme
A timeline of significant water quality events, violations, and data updates.
Latest EPA compliance and testing data incorporated into Acme's water quality assessment. Grade: A- (85.8/100).
Federal disaster declaration (FEMA DR-3629). Flood event — may have impacted local water infrastructure.
Contaminants: Consumer Confidence Rule.
Contaminants: Consumer Confidence Rule.
Federal disaster declaration (FEMA DR-4635). Flood event — may have impacted local water infrastructure.
Contaminants: Arsenic.
Key contaminant findings
Based on the most recent EPA sampling data for Acme's water supply.
Well within EPA limits.
Exceeds EPA action level. Copper can leach from household plumbing — flush taps for 30 seconds before drinking.
Violation history
Acme's water system has 32 total violations on record, including 4 health-based violations. 5 remain unresolved. 2 violations were issued in the last 5 years.
Flood & environmental risk
Whatcom County has experienced 10 federally declared disasters since 1979. Flooding and severe storms can overwhelm water treatment plants, cause sewage overflows, and introduce agricultural runoff, bacteria, and sediment into drinking water supplies. Local water sources include Anderson Creek, Brannian Creek, Olsen Creek, Carpenter Creek, Mf Nooksack River.
Where does Acme's water come from?
Acme's drinking water comes from groundwater (wells), supplied by 2 water systems serving approximately 666 people. Groundwater is generally less susceptible to surface contamination but can contain naturally occurring contaminants like arsenic, radon, and nitrate. Nearby water bodies include Anderson Creek (river), Brannian Creek (river), Olsen Creek (river), Carpenter Creek (river), Mf Nooksack River (river).
What Acme residents can do
Recommended: NSF-certified water filter. This addresses the specific contaminants found in Acme's water.
Your water utility is required to publish an annual Consumer Confidence Report (CCR) with detailed testing results. Ask for the latest copy or check your utility's website.
Acme's area has a history of flooding. After severe weather, watch for boil water advisories from your local utility.
Data: EPA SDWIS, UCMR 5 (PFAS), FEMA, NOAA. Last updated May 2026.
Top contaminants to know
View all ↓Violation summary
Violations & advisories
Flood & disaster history
Whatcom County has experienced 10 federally declared disasters since 1979. Flooding and severe weather can compromise water treatment infrastructure and introduce contaminants into drinking water supplies.
Recommended water filters
Based on contaminants detected in Acme's water supply, we recommend the following filter types.
Full contaminants report
| Contaminant | Detected Level | EPA Limit | Unit | Category | Status |
|---|---|---|---|---|---|
| Lead (90th percentile) LeadHeavy Metal A toxic heavy metal that can leach into drinking water from older pipes, solder, and fixtures. No amount of lead in water is considered safe. Health EffectsBrain and nervous system damage in children, kidney damage, high blood pressure, and reproductive problems in adults. EPA Limit15 ppb action level Common SourcesCorrosion of lead pipes, lead solder, brass faucets, and household plumbing. | 0.0 | 15 | ppb | Inorganic | Safe |
| Copper (90th percentile) CopperInorganic A metal that enters drinking water mainly through corrosion of copper plumbing. Small amounts are essential for health, but excess levels are harmful. Health EffectsGastrointestinal distress (nausea, vomiting, diarrhea) at short-term high levels; liver and kidney damage from long-term exposure. EPA Limit1.3 mg/L action level Common SourcesCorrosion of copper household plumbing, erosion of natural deposits. | 2.00 | 1.3 | mg/L | Inorganic | Over Limit |
Lead level trend (90th percentile)
Copper level (90th percentile)
Latest reading: 2.000 mg/L (2011)
EPA action level: 1.3 mg/L
See how Acme compares by contaminant
Explore where Acme ranks among all Washington cities for specific contaminants.
Water source & infrastructure
Where Acme's water comes from
Acme's drinking water is drawn from underground aquifers through wells.
Groundwater is naturally filtered through rock and soil layers, generally requiring less treatment than surface water. However, it can contain naturally occurring contaminants like arsenic, radon, and minerals.
Agricultural activity, septic systems, and industrial operations near well fields can introduce nitrates, pesticides, and volatile organic compounds.
The system is operated by local government ownership and serves approximately 666 people through 2 water systems.
Water bodies near Acme
Acme is located near 5 notable water bodies. These water bodies contribute to the regional watershed and may indirectly affect groundwater quality.
Water systems serving Acme
| System Name | PWSID | Population | Source |
|---|---|---|---|
| ACME WATER DISTRICT NO 18 | WA5300250 | 568 | GW |
| WICKERSHAM WATER ASSOCIATION | WA5396700 | 98 | GW |
How Acme compares
Full Washington rankings →Acme's score of 85.8/100 is above the average of 53/100 among major Washington cities. It outscores 9 of 10 nearby cities.
Nearby cities
View Washington rankings →Learn more about your water
Guides and resources related to Acme's water quality findings.
Explore water quality across Whatcom
Frequently asked questions
Is Acme, WA tap water safe to drink?
Acme's water quality earned a grade of A- (85.8/100). The water generally meets EPA standards and is considered safe for consumption. The city ranks #92 out of 294 cities tested in Washington.
What contaminants are in Acme's water?
Lead was measured at 0.0 ppb (90th percentile). 32 violations are on record.
How is Acme's water quality grade calculated?
The grade is based on four factors: violation history (40%), lead and copper levels (25%), PFAS contamination (25%), and regulatory compliance (10%). The score is also adjusted based on how complete the available data is. See our methodology page for full details.
Do I need a water filter in Acme?
Based on current data, basic filtration should suffice for additional peace of mind.
Where does Acme's water come from?
Acme's water is sourced from Groundwater. The city has 2 water systems serving approximately 666 residents.
What health violations has Acme's water system had?
Acme has 4 health-based violations on record. The most recent violation was recorded in July 2025. Health-based violations mean the water exceeded EPA maximum contaminant levels (MCLs) for a regulated substance. 5 violations remain unresolved.
Is Acme's groundwater at risk of contamination?
Acme uses groundwater, which can be affected by naturally occurring contaminants like arsenic, radon, and nitrate, as well as agricultural runoff and industrial activity. The system has 32 violations on record that may relate to groundwater quality. Groundwater systems are generally less susceptible to surface contamination but should be monitored for emerging contaminants like PFAS.
How does Acme's water compare to other cities?
Acme ranks #92 out of 294 cities in Washington (better than 69% of state cities) and #5124 out of 15744 cities nationally (68th percentile). The grade of A- reflects the combined assessment of violation history, lead and copper levels, PFAS contamination, and regulatory compliance.