Skip to main content
WaterVerge

Water quality report · updated Jul 2026

Is Taylor, MI Tap Water Safe to Drink?

Graded C — but Lead was detected above EPA limits. Here's what's in the water and how to remove it. What to do ↓

1 contaminant over a legal limit
16.3 ppb lead, 90th percentile
10 unresolved violations
63K people served by 1 water system

PWSID MI0006545 · high data confidence · local government utility

Reviewed by WaterVerge Editorial Team · Last updated July 2026
C 60.6 / 100

#466 of 513Michigan cities
How we grade →

01The verdict: is Taylor water safe?

Taylor's drinking water has significant quality concerns based on EPA testing data. With a grade of C (60.6/100), the system has issues across multiple categories. A water filter is recommended for all residents. The city's 1 water system serves approximately 63,409 residents using surface water (rivers, lakes, or reservoirs).

The concern

Lead is over its legal limit

Measured at 16.3 ppb against the EPA Action Level of 15 ppb. The ledger below shows how far over — and which filter removes it.

See the measurement ↓
The good news

No forever chemicals detected

UCMR 5 laboratory testing found no PFAS compounds above detection thresholds in this system.

See PFAS results ↓
Keep watching

7 violations in the last five years

Recent compliance history is the best predictor of future problems — the year-by-year record is below.

See the record ↓

Taylor's drinking water received a grade of C (60.6 out of 100), indicating fair water quality. The city's 1 water system serves approximately 63,409 residents using purchased surface water.

Lead levels were measured at 16.3 ppb (90th percentile), which exceeds the EPA action level of 15 ppb. PFAS testing under UCMR 5 found no detectable forever chemicals. The system has 16 violations on record, including 2 health-based violations. 10 remain unresolved.

Taylor ranks #466 out of 513 cities in Michigan for water quality, placing it among the lowest-rated in the state. The city draws from surface water sources, which are more susceptible to seasonal runoff and agricultural contamination, requiring extensive multi-barrier treatment including coagulation, filtration, and disinfection. Hexavalent chromium (chromium-6) was detected at 0.11 µg/L in UCMR 3 testing. While below California's 10 µg/L limit and with no federal MCL set, residents sensitive to this contaminant may consider reverse osmosis filtration. Lead levels exceed the EPA action level of 15 ppb, which typically indicates aging lead service lines or lead solder in the distribution system. An NSF 53-certified filter is strongly recommended for drinking and cooking water. The system has seen 7 violations in the past five years, suggesting a pattern of compliance challenges that residents should monitor closely.

How the 60.6/100 breaks down Methodology →
ViolationsHistorical violation record including health-based and monitoring violations.
32.1 / 45C
Lead & CopperLead at 16.3 ppb (90th percentile).
6 / 20F
ContaminantsNo PFAS compounds detected.
18.5 / 20A
ComplianceMonitoring and reporting compliance with EPA regulations.
0 / 10F
Source RiskWater source: Purchased surface water.
4 / 5B

02What's in Taylor's water

Every contaminant flagged in Taylor, on one shared scale: distance to its own legal limit. The red line is the limit — anything past it is out of compliance, and the closer a bar gets, the less headroom the system has.

6 detections · sorted by % of legal limit
Over the limit Elevated — watch Within limits
0 50% LEGAL LIMIT 150%

Over Limit — EPA Action Level: 15 ppb

Exceeds the EPA action level. Lead enters at the service line, not the treatment plant — your address matters more than the city average. Lead service line replacement and an NSF 53-certified point-of-use filter are recommended.
Exceeds LimitFilter: NSF-53 What to do →
Manganese Inorganic
21.6 µg/L 43% of limit
Strontium Inorganic
124.0 µg/L 8% of limit
Vanadium Inorganic
0.53 µg/L 3% of limit
36 contaminants tested under EPA SDWIS, LCR and UCMR programs · 6 detected Contaminants without a federal MCL are shown against the strictest state or advisory level named in each row.

Full contaminants report

Contaminant Detected Level EPA Limit Unit Category Status
Lead (90th percentile) 16.3 15 ppb Inorganic Over Limit
11Cl-PF3OUdS ND HI µg/L PFAS Not Detected
4:2 FTS ND HI µg/L PFAS Not Detected
6:2 FTS ND HI µg/L PFAS Not Detected
8:2 FTS ND HI µg/L PFAS Not Detected
9Cl-PF3ONS ND HI µg/L PFAS Not Detected
ADONA ND HI µg/L PFAS Not Detected
HFPO-DA ND 0.01 µg/L PFAS Not Detected
lithium ND HI µg/L PFAS Not Detected
NEtFOSAA ND HI µg/L PFAS Not Detected
NFDHA ND HI µg/L PFAS Not Detected
NMeFOSAA ND HI µg/L PFAS Not Detected
PFBA ND HI µg/L PFAS Not Detected
PFBS ND HI µg/L PFAS Not Detected
PFDA ND HI µg/L PFAS Not Detected
PFDoA ND HI µg/L PFAS Not Detected
PFEESA ND HI µg/L PFAS Not Detected
PFHpA ND HI µg/L PFAS Not Detected
PFHpS ND HI µg/L PFAS Not Detected
PFHxA ND HI µg/L PFAS Not Detected
PFHxS ND HI µg/L PFAS Not Detected
PFMBA ND HI µg/L PFAS Not Detected
PFMPA ND HI µg/L PFAS Not Detected
PFNA ND HI µg/L PFAS Not Detected
PFOA ND 0.004 µg/L PFAS Not Detected
PFOS ND 0.004 µg/L PFAS Not Detected
PFPeA ND HI µg/L PFAS Not Detected
PFPeS ND HI µg/L PFAS Not Detected
PFTA ND HI µg/L PFAS Not Detected
PFTrDA ND HI µg/L PFAS Not Detected
PFUnA ND HI µg/L PFAS Not Detected
Data source: EPA SDWIS, UCMR 5, local utility CCR.

03Taylor's ten-year track record

Each box is one year. A green check means no EPA violations; a numbered badge counts that year's violations — red if any were health-based, amber if they were monitoring or paperwork issues. The system has 16 violations on record, including 2 health-based violations. 10 remain unresolved.

5 of the last ten years were clean. The numbered years had EPA violations — red when any were health-based, amber when they were paperwork or missed-testing issues.

1 health-based in 10 yrs 9 monitoring & paperwork 7 still unresolved
UpdateWater quality data updatedLatest EPA compliance and testing data incorporated into Taylor's water quality assessment. Grade: C (60.6/100).
Violation1 drinking water violation recorded1 health-based. Contaminants: Lead and Copper Rule.Open
DisasterSEVERE STORMS, TORNADOES, AND FLOODINGFederal disaster declaration (FEMA DR-4757). Flood event — may have impacted local water infrastructure.
Violation1 drinking water violation recordedContaminants: Public Notice.Open
Violation1 drinking water violation recordedContaminants: Consumer Confidence Rule.Open
DisasterSEVERE STORMS AND FLOODINGFederal disaster declaration (FEMA DR-4195). Flood event — may have impacted local water infrastructure.
Lead, 90th percentileppb · lower is better
020406080EPA action level · 15 ppb1992 — 69 ppb1997 — 12 ppb1998 — 7 ppb1999 — 0 ppb2000 — 0 ppb2001 — 8.4 ppb2002 — 12 ppb2005 — 7.6 ppb2008 — 5 ppb2011 — 8.3 ppb2014 — 3.4 ppb2017 — 5.6 ppb2019 — 11 ppb2020 — 8.1 ppb2021 — 11 ppb2022 — 13 ppb2023 — 8.3 ppb2024 — 13 ppb2025 — 16 ppb6916199220002008201920232025

Down 53 ppb since 1992. The latest reading (16 ppb, 2025) is over the action level. Sampled at higher-risk homes (90th percentile).

04Where Taylor's water comes from

Taylor's drinking water comes primarily from surface water sources such as rivers, lakes, or reservoirs.

Source

Purchased Surface Water

Rivers, lakes, or reservoirs — more exposed to runoff, agriculture, and seasonal swings than groundwater.

Treatment

Wholesale supplier

Multi-barrier treatment: coagulation, sedimentation, filtration, and disinfection to meet EPA standards.

Distribution

1 system

1 water system, operated under local government ownership.

Delivery

63,409 people

Residents served across Taylor's service area.

Surface water systems require multi-stage treatment including coagulation, sedimentation, filtration, and disinfection to meet EPA Safe Drinking Water Act standards. These sources can be impacted by seasonal changes, stormwater runoff, upstream agriculture, and industrial discharge. The system is operated by local government ownership and serves approximately 63,409 people through 1 water system.

System namePWSIDPopulationSource
TAYLOR MI0006545 63,409 Purchased Surface Water

Water bodies near Taylor

River Rouge · river Middle River Rouge · river Lower River Rouge · river Ecorse River · river Frank And Poet Drain · river

As a surface-water system, these water bodies may directly influence Taylor's drinking water supply.

05Pressure on Taylor's watershed

Outside forces that shape what reaches the treatment plant. None of these is a verdict on the tap by itself — but each adds pressure worth knowing about.

Industrial discharge

Present — monitored

5 facilities within 10 miles reported 8k lb released to surface water in the latest EPA Toxics Release Inventory. Proximity doesn't equal tap contamination — treatment and hydrology decide — but it's pressure on the watershed.

CLEVELAND-CLIFFS STEEL CORP DEARBORN WORKS — manganese compounds 7k lb · 8.3 mi
US STEEL CORP GREAT LAKES WORKS — zinc compounds 634 lb · 7.2 mi
REPUBLIC INDUSTRIAL & ENERGY SOLUTIONS LLC — zinc compounds 194 lb · 2.9 mi
+ 2 more facilities

Flood & storm history

Recurring — declared disasters

6 federal disaster declarations on record for Wayne County. Flooding and severe storms can overwhelm treatment plants, cause sewage overflows, and push runoff into supplies.

SEVERE STORMS, TORNADOES, AND FLOODING Feb 2024 · DR-4757
SEVERE STORMS AND FLOODING Sep 2014 · DR-4195
HURRICANE KATRINA EVACUATION Sep 2005 · DR-3225

Superfund proximity

Multiple tracked sites nearby

2 National Priorities List sites within 10 miles. Proximity does not necessarily indicate tap-water contamination — the connection depends on hydrology and treatment.

06How Taylor compares

Scores for nearby Michigan cities on one line, with the average marked.

Detroit
84.1 · B+
Grand Rapids
70.2 · B-
Taylor (this city)
60.6 · C
Lansing
57.3 · C-
Ann Arbor
51.5 · D+
Kalamazoo
35 · F

dashed line = Michigan average (70/100)

Taylor scores 60.6/100below the Michigan average of 70/100. It outscores 4 of 10 nearby cities. Full Michigan rankings →

Wayne water quality rankings
Compare all cities in the county — grades, violations, and contaminant data side by side.

07What to do at home

Steps matched to what testing actually found in Taylor's water — not generic advice.

Because of lead

Filter drinking & cooking water

NSF 53-certified pitcher or under-sink filter. Lead level (16.3 ppb) exceeds the EPA action level of 15 ppb

Compare tested filters →
Because lead was detected

Flush taps & check your service line

Lead leaches from pipes as water sits. Run cold water 30 seconds before drinking (especially mornings), and ask the utility whether your address still has a lead service line.

Lead risks explained →
Stay informed

Watch for Taylor alerts

This area has a history of flood declarations — after severe weather, watch for boil-water advisories from the utility, and check the live alerts on this page.

All water alerts →

Frequently asked questions

Is Taylor, MI tap water safe to drink?

Taylor's water quality earned a grade of C (60.6/100). Some concerns have been identified. Consider a water filter for an extra layer of protection. The city ranks #466 out of 513 cities tested in Michigan.

What contaminants are in Taylor's water?

Lead was measured at 16.3 ppb (90th percentile). No PFAS compounds were detected. 16 violations are on record.

How is Taylor's water quality grade calculated?

The grade is based on four factors: violation history (40%), lead and copper levels (25%), PFAS contamination (25%), and regulatory compliance (10%). The score is also adjusted based on how complete the available data is. See our methodology page for full details.

Do I need a water filter in Taylor?

Yes — lead levels exceed the EPA action level of 15 ppb. We recommend an NSF 53-certified filter or reverse osmosis system. Based on current data, basic filtration should suffice for additional peace of mind.

Where does Taylor's water come from?

Taylor's water is sourced from Purchased surface water. The city has 1 water system serving approximately 63,409 residents.

What health violations has Taylor's water system had?

Taylor has 2 health-based violations on record. The most recent violation was recorded in November 2025. Health-based violations mean the water exceeded EPA maximum contaminant levels (MCLs) for a regulated substance. 10 violations remain unresolved.

How does Taylor's water compare to other cities?

Taylor ranks #466 out of 513 cities in Michigan (better than 9% of state cities) and #11867 out of 15382 cities nationally (23th percentile). The grade of C reflects the combined assessment of violation history, lead and copper levels, PFAS contamination, and regulatory compliance.

Share this reportHelp others learn about their water quality
WhatsAppXFacebookLinkedInEmail
About Taylor, MI: Taylor is a city in Wayne County in the U.S. state of Michigan. Its population was 63,409 at the 2020 census. Taylor is the fifth most-populated city in Wayne County and the 17th most-populated city in Michigan. Median household income $59,352 · median home value $131,903 · median age 37.9 · 65% homeowners · 15.4% college educated. Wikipedia → Service area: 1 ZIP code across Wayne.
Show ZIP codes 48180
Sources: EPA SDWIS & ECHO · UCMR 3–5 · Lead & Copper Rule samples · EPA TRI · U.S. Drought Monitor · FEMA declarations. Data last updated Jul 2026. Analysis by the WaterVerge Editorial Team · methodology.