01The verdict: is Rome (C) water safe?
Rome (C)'s drinking water has significant quality concerns based on EPA testing data. With a grade of B+ (84.9/100), the system has issues across multiple categories. A water filter is recommended for all residents. The city's 4 water systems serve approximately 36,485 residents using surface water (rivers, lakes, or reservoirs).
6 unresolved violations on record
EPA records show open compliance items for this system. Most are administrative, but unresolved items are worth watching.
See what was cited ↓Lead is well under the limit
90th-percentile lead is 5.0 ppb — beneath the 15 ppb federal action level and under the 5 ppb watch threshold.
See the trend ↓4 violations in the last five years
Recent compliance history is the best predictor of future problems — the year-by-year record is below.
See the record ↓Rome (C)'s drinking water received a grade of B+ (84.9 out of 100), indicating good water quality. The city's 4 water systems serve approximately 36,485 residents using surface water.
Lead levels were measured at 5.0 ppb (90th percentile), well within EPA limits. PFAS testing under UCMR 5 found no detectable forever chemicals. The system has 58 violations on record, including 20 health-based violations. 6 remain unresolved.
Rome (C) ranks #451 out of 810 cities in New York for water quality, placing it below average in the state. The city draws from surface water sources, which are more susceptible to seasonal runoff and agricultural contamination, requiring extensive multi-barrier treatment including coagulation, filtration, and disinfection. Haloacetic acid (HAA5) levels were elevated at 34.3 µg/L in UCMR 4 testing, though below the 60 µg/L EPA limit. Activated carbon filtration can help reduce these disinfection byproducts. Hexavalent chromium (chromium-6) was detected at 0.04 µg/L in UCMR 3 testing. While below California's 10 µg/L limit and with no federal MCL set, residents sensitive to this contaminant may consider reverse osmosis filtration.
02What's in Rome (C)'s water
Every contaminant flagged in Rome (C), on one shared scale: distance to its own legal limit. The red line is the limit — anything past it is out of compliance, and the closer a bar gets, the less headroom the system has.
Full contaminants report
| Contaminant | Detected Level | EPA Limit | Unit | Category | Status |
|---|---|---|---|---|---|
| Lead (90th percentile) LeadHeavy Metal A toxic heavy metal that can leach into drinking water from older pipes, solder, and fixtures. No amount of lead in water is considered safe. Health EffectsBrain and nervous system damage in children, kidney damage, high blood pressure, and reproductive problems in adults. EPA Limit15 ppb action level Common SourcesCorrosion of lead pipes, lead solder, brass faucets, and household plumbing. | 5.0 | 15 | ppb | Inorganic | Safe |
| 11Cl-PF3OUdS | ND | HI | µg/L | PFAS | Not Detected |
| 4:2 FTS | ND | HI | µg/L | PFAS | Not Detected |
| 6:2 FTS 6:2 FTSPFAS A fluorotelomer sulfonate commonly found at sites contaminated with aqueous film-forming foam (AFFF) used in firefighting. Health EffectsPotential liver toxicity and endocrine disruption. Less studied but identified as a contaminant of concern. EPA LimitNo individual MCL (not yet regulated) Common SourcesFirefighting foam (AFFF), airports, military bases, and industrial facilities. | ND | HI | µg/L | PFAS | Not Detected |
| 8:2 FTS | ND | HI | µg/L | PFAS | Not Detected |
| 9Cl-PF3ONS | ND | HI | µg/L | PFAS | Not Detected |
| ADONA | ND | HI | µg/L | PFAS | Not Detected |
| HFPO-DA HFPO-DA (GenX)PFAS A replacement for PFOA in manufacturing, marketed as safer but still a persistent "forever chemical." Also known as GenX. Health EffectsLiver and kidney effects, reproductive toxicity, immune system effects, and potential cancer risk. EPA Limit10 ppt MCL Common SourcesFluoropolymer manufacturing (used as PFOA replacement), industrial wastewater discharge. | ND | 0.01 | µg/L | PFAS | Not Detected |
| lithium LithiumInorganic A naturally occurring alkali metal found in groundwater. Monitored under UCMR 5 to assess occurrence in drinking water. Health EffectsKidney effects at high doses. Low-level exposure effects under study; some research suggests neurological effects. EPA LimitNo MCL (monitoring only under UCMR 5) Common SourcesNatural mineral deposits, geothermal water, and industrial discharge. | ND | HI | µg/L | PFAS | Not Detected |
| NEtFOSAA | ND | HI | µg/L | PFAS | Not Detected |
| NFDHA | ND | HI | µg/L | PFAS | Not Detected |
| NMeFOSAA | ND | HI | µg/L | PFAS | Not Detected |
| PFBA PFBAPFAS One of the shortest-chain PFAS compounds. Very mobile in water and difficult to remove with standard filtration. Health EffectsThyroid effects, potential developmental toxicity. Shorter half-life in body than long-chain PFAS. EPA LimitNo individual MCL (not yet regulated) Common SourcesDegradation of longer-chain PFAS, industrial discharge, and firefighting foam. | ND | HI | µg/L | PFAS | Not Detected |
| PFBS PFBSPFAS A short-chain PFAS used as a replacement for PFOS. While it clears the body faster than long-chain PFAS, it still persists in the environment. Health EffectsThyroid effects, reproductive and developmental toxicity, kidney effects. EPA LimitPart of Hazard Index (1.0) Common SourcesIndustrial discharge, firefighting foam, and as a replacement chemical in manufacturing. | ND | HI | µg/L | PFAS | Not Detected |
| PFDA | ND | HI | µg/L | PFAS | Not Detected |
| PFDoA | ND | HI | µg/L | PFAS | Not Detected |
| PFEESA | ND | HI | µg/L | PFAS | Not Detected |
| PFHpA PFHpAPFAS A medium-chain PFAS compound found in various environmental samples. Less studied than PFOA/PFOS but still considered a contaminant of concern. Health EffectsLiver effects, potential developmental toxicity, and endocrine disruption. EPA LimitPart of Hazard Index (1.0) Common SourcesDegradation of longer-chain PFAS, industrial discharge, and contaminated water sources. | ND | HI | µg/L | PFAS | Not Detected |
| PFHpS | ND | HI | µg/L | PFAS | Not Detected |
| PFHxA PFHxAPFAS A short-chain PFAS replacement chemical widely used after manufacturers phased out longer-chain PFAS. Very commonly detected in water. Health EffectsLiver and kidney effects, potential thyroid disruption. Considered less toxic than long-chain PFAS but still persistent. EPA LimitNo individual MCL (not yet regulated) Common SourcesIndustrial processes, firefighting foam (AFFF), food packaging, and textile treatment. | ND | HI | µg/L | PFAS | Not Detected |
| PFHxS PFHxSPFAS A medium-chain PFAS found in firefighting foam and consumer products. It has a long half-life in the human body, similar to long-chain PFAS. Health EffectsImmune system effects, thyroid disruption, and potential reproductive and developmental harm. EPA LimitPart of Hazard Index (1.0) Common SourcesFirefighting foam (AFFF), waterproof textiles, food packaging, and industrial discharge. | ND | HI | µg/L | PFAS | Not Detected |
| PFMBA | ND | HI | µg/L | PFAS | Not Detected |
| PFMPA | ND | HI | µg/L | PFAS | Not Detected |
| PFNA PFNAPFAS A long-chain PFAS compound used in manufacturing fluoropolymers. It bioaccumulates in the body and is very persistent in the environment. Health EffectsDevelopmental effects, liver toxicity, immune suppression, and potential cancer risk. EPA LimitPart of Hazard Index (1.0) Common SourcesFluoropolymer manufacturing, industrial emissions, and contaminated water sources. | ND | HI | µg/L | PFAS | Not Detected |
| PFOA PFOAPFAS A long-chain PFAS ("forever chemical") once widely used in nonstick coatings and firefighting foam. It persists in the body and environment for years. Health EffectsLinked to kidney and testicular cancer, thyroid disease, elevated cholesterol, and reproductive issues. EPA Limit4.0 ppt MCL Common SourcesIndustrial discharge, firefighting foam (AFFF), nonstick cookware manufacturing, and contaminated groundwater. | ND | 0.004 | µg/L | PFAS | Not Detected |
| PFOS PFOSPFAS A long-chain PFAS compound historically used in stain-resistant coatings and firefighting foam. One of the most studied and persistent PFAS chemicals. Health EffectsLiver damage, immune system suppression, thyroid disruption, increased cholesterol, and potential cancer risk. EPA Limit4.0 ppt MCL Common SourcesFirefighting foam (AFFF), industrial sites, stain-resistant fabric treatments, and contaminated groundwater. | ND | 0.004 | µg/L | PFAS | Not Detected |
| PFPeA PFPeAPFAS A short-chain PFAS compound commonly detected in drinking water. One of the most frequently found PFAS in UCMR 5 monitoring. Health EffectsLess studied than PFOA/PFOS. Potential liver and thyroid effects. Research is ongoing. EPA LimitNo individual MCL (not yet regulated) Common SourcesIndustrial discharge, firefighting foam degradation, and consumer products. | ND | HI | µg/L | PFAS | Not Detected |
| PFPeS | ND | HI | µg/L | PFAS | Not Detected |
| PFTA | ND | HI | µg/L | PFAS | Not Detected |
| PFTrDA | ND | HI | µg/L | PFAS | Not Detected |
| PFUnA | ND | HI | µg/L | PFAS | Not Detected |
Cities ranked by 90th-percentile lead PF PFAS in New York
Cities ranked by compounds detected Cu Copper in New York
Cities ranked by 90th-percentile copper
03Rome (C)'s ten-year track record
Each box is one year. A green check means no EPA violations; a numbered badge counts that year's violations — red if any were health-based, amber if they were monitoring or paperwork issues. The system has 58 violations on record, including 20 health-based violations. 6 remain unresolved.
7 of the last ten years were clean. The numbered years had EPA violations — red when any were health-based, amber when they were paperwork or missed-testing issues.
▼ Down 11 ppb since 1992. Latest reading: 4 ppb (2024) — 27% of the action level. Sampled at higher-risk homes (90th percentile).
04Where Rome (C)'s water comes from
Rome (C)'s drinking water comes primarily from surface water sources such as rivers, lakes, or reservoirs.
Surface Water
Rivers, lakes, or reservoirs — more exposed to runoff, agriculture, and seasonal swings than groundwater.
Local treatment
Multi-barrier treatment: coagulation, sedimentation, filtration, and disinfection to meet EPA standards.
4 systems
4 water systems, operated under local government ownership.
36,485 people
Residents served across Rome (C)'s service area.
Surface water systems require multi-stage treatment including coagulation, sedimentation, filtration, and disinfection to meet EPA Safe Drinking Water Act standards. These sources can be impacted by seasonal changes, stormwater runoff, upstream agriculture, and industrial discharge. The system is operated by local government ownership and serves approximately 36,485 people through 4 water systems.
| System name | PWSID | Population | Source |
|---|---|---|---|
| ROME CITY | NY3202405 | 32,850 | Surface Water |
| LEE WATER DISTRICT | NY3202394 | 3,150 | Purchased Surface Water |
| MOHAWK CORRECTIONAL FACILITY | NY3233160 | 1,925 | Purchased Surface Water |
| FLOYD WATER DISTRICT | NY3222694 | 1,710 | Purchased Surface Water |
Water bodies near Rome (C)
As a surface-water system, these water bodies may directly influence Rome (C)'s drinking water supply.
05Pressure on Rome (C)'s watershed
Outside forces that shape what reaches the treatment plant. None of these is a verdict on the tap by itself — but each adds pressure worth knowing about.
Flood & storm history
8 federal disaster declarations on record for Oneida County. Flooding and severe storms can overwhelm treatment plants, cause sewage overflows, and push runoff into supplies.
06How Rome (C) compares
Scores for nearby New York cities on one line, with the average marked.
dashed line = New York average (78/100)
Rome (C) scores 84.9/100 — above the New York average of 78/100. It outscores 7 of 10 nearby cities. Full New York rankings →
89 / 100CBrookhaven (T), NY
60.9 / 100AEast Hampton (T), NY
85.1 / 100BIslip (T), NY
71.8 / 100BSmithtown (T), NY
84.8 / 100BSouthampton (T), NY
78.8 / 100
Compare all cities in the county — grades, violations, and contaminant data side by side.→
07What to do at home
Steps matched to what testing actually found in Rome (C)'s water — not generic advice.
A basic carbon filter still helps
Rome (C)'s water meets federal standards, but a simple carbon filter improves taste and adds a margin of safety against short-term issues.
Compare tested filters →Flush taps & check your service line
Lead leaches from pipes as water sits. Run cold water 30 seconds before drinking (especially mornings), and ask the utility whether your address still has a lead service line.
Lead risks explained →Watch for Rome (C) alerts
This area has a history of flood declarations — after severe weather, watch for boil-water advisories from the utility, and check the live alerts on this page.
All water alerts →Frequently asked questions
Is Rome (C), NY tap water safe to drink?
Rome (C)'s water quality earned a grade of B+ (84.9/100). The water generally meets EPA standards and is considered safe for consumption. The city ranks #451 out of 810 cities tested in New York.
What contaminants are in Rome (C)'s water?
Lead was measured at 5.0 ppb (90th percentile). No PFAS compounds were detected. 58 violations are on record.
How is Rome (C)'s water quality grade calculated?
The grade is based on four factors: violation history (40%), lead and copper levels (25%), PFAS contamination (25%), and regulatory compliance (10%). The score is also adjusted based on how complete the available data is. See our methodology page for full details.
Do I need a water filter in Rome (C)?
Based on current data, basic filtration should suffice for additional peace of mind.
Where does Rome (C)'s water come from?
Rome (C)'s water is sourced from Surface water. The city has 4 water systems serving approximately 36,485 residents.
What health violations has Rome (C)'s water system had?
Rome (C) has 20 health-based violations on record. The most recent violation was recorded in September 2024. Health-based violations mean the water exceeded EPA maximum contaminant levels (MCLs) for a regulated substance. 6 violations remain unresolved.
How does Rome (C)'s water compare to other cities?
Rome (C) ranks #451 out of 810 cities in New York (better than 44% of state cities) and #5556 out of 15382 cities nationally (64th percentile). The grade of B+ reflects the combined assessment of violation history, lead and copper levels, PFAS contamination, and regulatory compliance.