Skip to main content
WaterVerge

Water quality report · updated Jul 2026

Is Pooler, GA Tap Water Safe to Drink?

Graded D+, with 62 unresolved violations on record. See what was cited — and what it means for your tap. What to do ↓

0 contaminants over a legal limit
8.1 ppb lead, 90th percentile
62 unresolved violations
22K people served by 8 water systems

PWSID GA0510001 · high data confidence · local government utility

Reviewed by WaterVerge Editorial Team · Last updated July 2026
D 50.5 / 100

#312 of 372Georgia cities
How we grade →

01The verdict: is Pooler water safe?

Pooler's drinking water has significant quality concerns based on EPA testing data. With a grade of D+ (50.5/100), the system has issues across multiple categories. A water filter is recommended for all residents. The city's 8 water systems serve approximately 22,360 residents using surface water (rivers, lakes, or reservoirs).

The concern

62 unresolved violations on record

EPA records show open compliance items for this system. Most are administrative, but unresolved items are worth watching.

See what was cited ↓
Context

22K people, 8 systems

All figures on this page come from federal EPA compliance and testing data for the systems serving this city.

See the systems ↓
Keep watching

lithium is approaching its limit

Measured at 13.6000 µg/L — 120% of the 0.004 µg/L limit. Within the rules, but with less headroom than you'd want.

See the ledger ↓

Pooler's drinking water received a grade of D+ (50.5 out of 100), indicating poor water quality. The city's 8 water systems serve approximately 22,360 residents using purchased surface water.

Lead levels were measured at 8.1 ppb (90th percentile), which is within EPA limits but above recommended levels. UCMR 5 testing detected 4 PFAS compounds, with levels exceeding EPA maximum contaminant levels in the water supply. The system has 128 violations on record, including 9 health-based violations. 62 remain unresolved.

Pooler ranks #312 out of 372 cities in Georgia for water quality, placing it among the lowest-rated in the state. The city draws from surface water sources, which are more susceptible to seasonal runoff and agricultural contamination, requiring extensive multi-barrier treatment including coagulation, filtration, and disinfection. Of particular concern: PFAS "forever chemical" levels exceed the 2024 EPA maximum contaminant levels. These synthetic compounds don't break down naturally and require specialized filtration such as reverse osmosis or granular activated carbon. Hexavalent chromium (chromium-6) was detected at 0.09 µg/L in UCMR 3 testing. While below California's 10 µg/L limit and with no federal MCL set, residents sensitive to this contaminant may consider reverse osmosis filtration. While lead levels are within EPA limits, they are above the recommended 5 ppb threshold that health organizations consider ideal. A point-of-use filter adds an extra layer of protection. The system has seen 14 violations in the past five years, suggesting a pattern of compliance challenges that residents should monitor closely.

How the 50.5/100 breaks down Methodology →
ViolationsHistorical violation record including health-based and monitoring violations.
17 / 45F
Lead & CopperLead at 8.1 ppb (90th percentile).
16 / 20B
Contaminants4 PFAS compounds detected.
10.4 / 20D
ComplianceMonitoring and reporting compliance with EPA regulations.
3 / 10F
Source RiskWater source: Purchased surface water.
4 / 5B

02What's in Pooler's water

Every contaminant flagged in Pooler, on one shared scale: distance to its own legal limit. The red line is the limit — anything past it is out of compliance, and the closer a bar gets, the less headroom the system has.

10 detections · sorted by % of legal limit
Over the limit Elevated — watch Within limits
0 50% LEGAL LIMIT 150%
lithium PFAS / Forever Chemical
13.6000 µg/L 120% of limit
1,4-Dioxane Organic
0.15 µg/L 43% of limit
Manganese Inorganic
16.4 µg/L 33% of limit
Strontium Inorganic
478.0 µg/L 32% of limit
Lithium Inorganic
13.6 µg/L 23% of limit
Molybdenum Inorganic
3.60 µg/L 9% of limit
Vanadium Inorganic
0.74 µg/L 4% of limit
39 contaminants tested under EPA SDWIS, LCR and UCMR programs · 13 detected · 2 PFAS over EPA MCL · PFAS hazard index 2.40 (above the 1.0 threshold) Contaminants without a federal MCL are shown against the strictest state or advisory level named in each row.

Full contaminants report

Contaminant Detected Level EPA Limit Unit Category Status
Lead (90th percentile) 8.1 15 ppb Inorganic Safe
11Cl-PF3OUdS ND HI µg/L PFAS Not Detected
4:2 FTS ND HI µg/L PFAS Not Detected
6:2 FTS ND HI µg/L PFAS Not Detected
8:2 FTS ND HI µg/L PFAS Not Detected
9Cl-PF3ONS ND HI µg/L PFAS Not Detected
ADONA ND HI µg/L PFAS Not Detected
HFPO-DA ND 0.01 µg/L PFAS Not Detected
lithium 13.600 HI µg/L PFAS Detected
NEtFOSAA ND HI µg/L PFAS Not Detected
NFDHA ND HI µg/L PFAS Not Detected
NMeFOSAA ND HI µg/L PFAS Not Detected
PFBA ND HI µg/L PFAS Not Detected
PFBS 0.004 HI µg/L PFAS Detected
PFDA ND HI µg/L PFAS Not Detected
PFDoA ND HI µg/L PFAS Not Detected
PFEESA ND HI µg/L PFAS Not Detected
PFHpA ND HI µg/L PFAS Not Detected
PFHpS ND HI µg/L PFAS Not Detected
PFHxA ND HI µg/L PFAS Not Detected
PFHxS ND HI µg/L PFAS Not Detected
PFMBA ND HI µg/L PFAS Not Detected
PFMPA ND HI µg/L PFAS Not Detected
PFNA ND HI µg/L PFAS Not Detected
PFOA 0.005 0.004 µg/L PFAS Over MCL
PFOS 0.005 0.004 µg/L PFAS Over MCL
PFPeA ND HI µg/L PFAS Not Detected
PFPeS ND HI µg/L PFAS Not Detected
PFTA ND HI µg/L PFAS Not Detected
PFTrDA ND HI µg/L PFAS Not Detected
PFUnA ND HI µg/L PFAS Not Detected
Data source: EPA SDWIS, UCMR 5, local utility CCR.

03Pooler's ten-year track record

Each box is one year. A green check means no EPA violations; a numbered badge counts that year's violations — red if any were health-based, amber if they were monitoring or paperwork issues. The system has 128 violations on record, including 9 health-based violations. 62 remain unresolved.

3 of the last ten years were clean. The numbered years had EPA violations — red when any were health-based, amber when they were paperwork or missed-testing issues.

1 health-based in 10 yrs 28 monitoring & paperwork 16 still unresolved
PFAS4 PFAS "forever chemical" compounds detectedPFAS levels exceed EPA maximum contaminant levels. Reverse osmosis or activated carbon filtration recommended.
UpdateWater quality data updatedLatest EPA compliance and testing data incorporated into Pooler's water quality assessment. Grade: D+ (50.5/100).
Violation1 drinking water violation recordedContaminants: Consumer Confidence Rule.Open
Violation1 drinking water violation recorded1 health-based. Contaminants: Revised Total Coliform Rule.Resolved
Violation4 drinking water violations recordedContaminants: LEAD AND COPPER RULE REVISIONS.Open
DisasterHURRICANE HELENEFederal disaster declaration (FEMA DR-4830). Hurricane event — may have impacted local water infrastructure.
Lead, 90th percentileppb · lower is better
020406080100EPA action level · 15 ppb2000 — 2.8 ppb2002 — 0 ppb2003 — 3.2 ppb2004 — 0 ppb2005 — 0 ppb2006 — 0 ppb2007 — 2.6 ppb2009 — 0 ppb2010 — 2.5 ppb2012 — 0 ppb2013 — 0 ppb2014 — 0 ppb2015 — 0 ppb2016 — 0.90 ppb2017 — 1 ppb2018 — 0 ppb2019 — 2.6 ppb2020 — 1.5 ppb2021 — 6.8 ppb2022 — 0 ppb2023 — 1.9 ppb2024 — 72 ppb2025 — 0 ppb2.80200020062013201820232025

Down 2.8 ppb since 2000. Latest reading: 0 ppb (2025) — 0% of the action level. Sampled at higher-risk homes (90th percentile).

04Where Pooler's water comes from

Pooler's drinking water comes primarily from surface water sources such as rivers, lakes, or reservoirs.

Source

Purchased Surface Water

Rivers, lakes, or reservoirs — more exposed to runoff, agriculture, and seasonal swings than groundwater.

Treatment

Wholesale supplier

Multi-barrier treatment: coagulation, sedimentation, filtration, and disinfection to meet EPA standards.

Distribution

8 systems

8 water systems, operated under local government ownership.

Delivery

22,360 people

Residents served across Pooler's service area.

Surface water systems require multi-stage treatment including coagulation, sedimentation, filtration, and disinfection to meet EPA Safe Drinking Water Act standards. These sources can be impacted by seasonal changes, stormwater runoff, upstream agriculture, and industrial discharge. The system is operated by local government ownership and serves approximately 22,360 people through 8 water systems.

System namePWSIDPopulationSource
POOLER GA0510001 21,187 Purchased Surface Water
NASSAU WOODS MOBILE HOME PARK GA0510089 772 Groundwater
SAVANNAH PINES MOBILE HOME PARK GA0510051 632 Groundwater
GARDEN ACRES ESTATES GA0510026 525 Groundwater
T & H MOBILE HOME PARK GA0690059 324 Groundwater
ENGLISH OAKS MOBILE HOME PARK GA0310187 226 Groundwater
SOUTH POINTE S/D GA0690071 60 Groundwater
EDWARDS MOBILE HOME PARK GA1030099 38 Groundwater

Water bodies near Pooler

Abercorn Creek · stream Savannah River I-95 · stream Savannah River · stream Middle River · stream L Back River Above Lucknow Canal, Nr Limehouse · stream

As a surface-water system, these water bodies may directly influence Pooler's drinking water supply.

05Pressure on Pooler's watershed

Outside forces that shape what reaches the treatment plant. None of these is a verdict on the tap by itself — but each adds pressure worth knowing about.

Industrial discharge

Moderate — reported releases upstream

5 facilities within 10 miles reported 233k lb released to surface water in the latest EPA Toxics Release Inventory. Proximity doesn't equal tap contamination — treatment and hydrology decide — but it's pressure on the watershed.

EMD PERFORMANCE MATERIALS CORP — nitrate compounds (water dissociable; reportable only when in aqueous solution) 138k lb · 8.0 mi
INTERNATIONAL PAPER CO - SAVANNAH COMPLEX — manganese and manganese compounds 53k lb · 7.9 mi
INTERNATIONAL PAPER CO - PORT WENTWORTH — manganese and manganese compounds 41k lb · 6.5 mi
+ 2 more facilities

Flood & storm history

Recurring — declared disasters

9 federal disaster declarations on record for Chatham County. Flooding and severe storms can overwhelm treatment plants, cause sewage overflows, and push runoff into supplies.

HURRICANE HELENE Sep 2024 · DR-4830
HURRICANE DORIAN Sep 2019 · DR-3422
HURRICANE MICHAEL Oct 2018 · DR-3406

Drought

D1 — moderate drought

Bulloch County is in D1 (moderate drought) per the U.S. Drought Monitor (week of Jul 2026). Drought can raise disinfection-byproduct levels and taste/odor issues as utilities draw from lower reservoirs.

Weeks at D2+ in the last 5 years20 wks
Months in D2+ over the last 30 years24.0%

06How Pooler compares

Scores for nearby Georgia cities on one line, with the average marked.

Decatur
84.8 · B+
Morrow
83.6 · B+
Marietta
82.2 · B+
Pooler (this city)
50.5 · D+
Alpharetta
41.4 · F
Atlanta
37.2 · F

dashed line = Georgia average (61/100)

Pooler scores 50.5/100below the Georgia average of 61/100. It outscores 5 of 10 nearby cities. Full Georgia rankings →

Chatham water quality rankings
Compare all cities in the county — grades, violations, and contaminant data side by side.

07What to do at home

Steps matched to what testing actually found in Pooler's water — not generic advice.

Because of lead

Filter drinking & cooking water

Reverse osmosis system. Lead detected at 8.1 ppb

Compare tested filters →
Because lead was detected

Flush taps & check your service line

Lead leaches from pipes as water sits. Run cold water 30 seconds before drinking (especially mornings), and ask the utility whether your address still has a lead service line.

Lead risks explained →
Stay informed

Watch for Pooler alerts

This area has a history of flood declarations — after severe weather, watch for boil-water advisories from the utility, and check the live alerts on this page.

All water alerts →

Frequently asked questions

Is Pooler, GA tap water safe to drink?

Pooler's water quality earned a grade of D+ (50.5/100). Significant issues have been found. A water filter is strongly recommended. The city ranks #312 out of 372 cities tested in Georgia.

What contaminants are in Pooler's water?

Lead was measured at 8.1 ppb (90th percentile). 4 PFAS compounds were detected. 128 violations are on record.

How is Pooler's water quality grade calculated?

The grade is based on four factors: violation history (40%), lead and copper levels (25%), PFAS contamination (25%), and regulatory compliance (10%). The score is also adjusted based on how complete the available data is. See our methodology page for full details.

Do I need a water filter in Pooler?

While lead levels are within EPA limits, a filter adds extra protection. PFAS compounds exceed EPA limits — a reverse osmosis or activated carbon filter is recommended.

Where does Pooler's water come from?

Pooler's water is sourced from Purchased surface water. The city has 8 water systems serving approximately 22,360 residents.

What health violations has Pooler's water system had?

Pooler has 9 health-based violations on record. The most recent violation was recorded in July 2025. Health-based violations mean the water exceeded EPA maximum contaminant levels (MCLs) for a regulated substance. 62 violations remain unresolved.

Why does Pooler have so many PFAS compounds in its water?

4 different PFAS "forever chemical" compounds were detected in Pooler's water supply during UCMR 5 testing. PFAS contamination often originates from proximity to military installations (AFFF firefighting foam), airports, industrial manufacturing sites, or wastewater treatment facilities. Some levels exceed the 2024 EPA maximum contaminant levels — a reverse osmosis or NSF-certified activated carbon filter is strongly recommended.

How does Pooler's water compare to other cities?

Pooler ranks #312 out of 372 cities in Georgia (better than 16% of state cities) and #12758 out of 15382 cities nationally (17th percentile). The grade of D+ reflects the combined assessment of violation history, lead and copper levels, PFAS contamination, and regulatory compliance.

Share this reportHelp others learn about their water quality
WhatsAppXFacebookLinkedInEmail
About Pooler, GA: Pooler is a city in Chatham County, Georgia, United States. As of the 2020 census, Pooler had a population of 25,711. Pooler is located northwest of Savannah along Interstates 95 and 16. It comprises part of the Savannah metropolitan area. Median household income $89,812 · median home value $267,728 · median age 39.2 · 60.5% homeowners · 41% college educated. Wikipedia → Service area: 1 ZIP code across Chatham.
Show ZIP codes 31322
Sources: EPA SDWIS & ECHO · UCMR 3–5 · Lead & Copper Rule samples · EPA TRI · U.S. Drought Monitor · FEMA declarations. Data last updated Jul 2026. Analysis by the WaterVerge Editorial Team · methodology.