Skip to main content
WaterVerge

Water quality report · updated Jul 2026

Is Old Saybrook, CT Tap Water Safe to Drink?

Graded B- — but PFOS was detected above EPA limits. Here's what's in the water and how to remove it. What to do ↓

1 contaminant over a legal limit
0.0 ppb lead, 90th percentile · low
1 unresolved violation
34K people served by 1 water system

PWSID CT0608011 · high data confidence · private utility

Reviewed by WaterVerge Editorial Team · Last updated July 2026
B 74.3 / 100

#37 of 129Connecticut cities
How we grade →

01The verdict: is Old Saybrook water safe?

Old Saybrook's tap water meets most EPA standards but has areas that warrant attention. With a grade of B- (74.3/100), some contaminant levels or compliance issues suggest that residents may benefit from additional filtration. The city's 1 water system serves approximately 33,975 residents using surface water (rivers, lakes, or reservoirs).

The concern

PFOS is over its legal limit

Measured at 0.0120 µg/L against the EPA MCL of 0.004 µg/L. The ledger below shows how far over — and which filter removes it.

See the measurement ↓
The good news

Lead is well under the limit

90th-percentile lead is 0.0 ppb — beneath the 15 ppb federal action level and under the 5 ppb watch threshold.

See the trend ↓
Keep watching

PFBA is approaching its limit

Measured at 0.0120 µg/L — 120% of the 0.004 µg/L limit. Within the rules, but with less headroom than you'd want.

See the ledger ↓

Old Saybrook's drinking water received a grade of B- (74.3 out of 100), indicating fair water quality. The city's 1 water system serves approximately 33,975 residents using surface water.

Lead levels were measured at 0.0 ppb (90th percentile), well within EPA limits. UCMR 5 testing detected 7 PFAS compounds, with levels exceeding EPA maximum contaminant levels in the water supply. The system has 288 violations on record, including 0 health-based violations. 1 remains unresolved.

Old Saybrook ranks #37 out of 129 cities in Connecticut for water quality, placing it mid-range in the state. The city draws from surface water sources, which are more susceptible to seasonal runoff and agricultural contamination, requiring extensive multi-barrier treatment including coagulation, filtration, and disinfection. Of particular concern: PFAS "forever chemical" levels exceed the 2024 EPA maximum contaminant levels. These synthetic compounds don't break down naturally and require specialized filtration such as reverse osmosis or granular activated carbon. Hexavalent chromium (chromium-6) was detected at 0.11 µg/L in UCMR 3 testing. While below California's 10 µg/L limit and with no federal MCL set, residents sensitive to this contaminant may consider reverse osmosis filtration.

How the 74.3/100 breaks down Methodology →
ViolationsHistorical violation record including health-based and monitoring violations.
30.4 / 45C
Lead & CopperLead at 0.0 ppb (90th percentile).
20 / 20A
Contaminants7 PFAS compounds detected.
9.9 / 20D
ComplianceMonitoring and reporting compliance with EPA regulations.
10 / 10A
Source RiskWater source: Surface water.
4 / 5B

02What's in Old Saybrook's water

Every contaminant flagged in Old Saybrook, on one shared scale: distance to its own legal limit. The red line is the limit — anything past it is out of compliance, and the closer a bar gets, the less headroom the system has.

10 detections · sorted by % of legal limit
Over the limit Elevated — watch Within limits
0 50% LEGAL LIMIT 150%

Over MCL — EPA MCL: 0.004 µg/L

PFAS "forever chemicals" exceed the 2024 EPA maximum contaminant levels, which utilities must meet by 2029. These compounds don't break down in the body or the environment. Reverse osmosis (NSF/ANSI 58) or certified granular activated carbon (NSF/ANSI 53) removes them at the tap.
Exceeds MCL What to do →
Manganese Inorganic
31.6 µg/L 63% of limit
Chlorate Disinfection Byproduct
110.0 µg/L 52% of limit
Strontium Inorganic
130.0 µg/L 9% of limit
Molybdenum Inorganic
1.30 µg/L 3% of limit
Vanadium Inorganic
0.56 µg/L 3% of limit
38 contaminants tested under EPA SDWIS, LCR and UCMR programs · 15 detected · 2 PFAS over EPA MCL · PFAS hazard index 4.50 (above the 1.0 threshold) Contaminants without a federal MCL are shown against the strictest state or advisory level named in each row.

Full contaminants report

Contaminant Detected Level EPA Limit Unit Category Status
Lead (90th percentile) 0.0 15 ppb Inorganic Safe
11Cl-PF3OUdS ND HI µg/L PFAS Not Detected
4:2 FTS ND HI µg/L PFAS Not Detected
6:2 FTS ND HI µg/L PFAS Not Detected
8:2 FTS ND HI µg/L PFAS Not Detected
9Cl-PF3ONS ND HI µg/L PFAS Not Detected
ADONA ND HI µg/L PFAS Not Detected
HFPO-DA ND 0.01 µg/L PFAS Not Detected
lithium ND HI µg/L PFAS Not Detected
NEtFOSAA ND HI µg/L PFAS Not Detected
NFDHA ND HI µg/L PFAS Not Detected
NMeFOSAA ND HI µg/L PFAS Not Detected
PFBA 0.012 HI µg/L PFAS Detected
PFBS 0.005 HI µg/L PFAS Detected
PFDA ND HI µg/L PFAS Not Detected
PFDoA ND HI µg/L PFAS Not Detected
PFEESA ND HI µg/L PFAS Not Detected
PFHpA ND HI µg/L PFAS Not Detected
PFHpS ND HI µg/L PFAS Not Detected
PFHxA 0.004 HI µg/L PFAS Detected
PFHxS 0.004 HI µg/L PFAS Detected
PFMBA ND HI µg/L PFAS Not Detected
PFMPA ND HI µg/L PFAS Not Detected
PFNA ND HI µg/L PFAS Not Detected
PFOA 0.006 0.004 µg/L PFAS Over MCL
PFOS 0.012 0.004 µg/L PFAS Over MCL
PFPeA 0.004 HI µg/L PFAS Detected
PFPeS ND HI µg/L PFAS Not Detected
PFTA ND HI µg/L PFAS Not Detected
PFTrDA ND HI µg/L PFAS Not Detected
PFUnA ND HI µg/L PFAS Not Detected
Data source: EPA SDWIS, UCMR 5, local utility CCR.

03Old Saybrook's ten-year track record

Each box is one year. A green check means no EPA violations; a numbered badge counts that year's violations — red if any were health-based, amber if they were monitoring or paperwork issues. The system has 288 violations on record, including 0 health-based violations. 1 remains unresolved.

All ten of the last ten years were clean — no EPA violations recorded for Old Saybrook.

PFAS7 PFAS "forever chemical" compounds detectedPFAS levels exceed EPA maximum contaminant levels. Reverse osmosis or activated carbon filtration recommended.
UpdateWater quality data updatedLatest EPA compliance and testing data incorporated into Old Saybrook's water quality assessment. Grade: B- (74.3/100).
Violation2 drinking water violations recordedContaminants: Nitrate, Nitrite.Resolved
Violation31 drinking water violations recordedContaminants: Di(2-ethylhexyl) adipate, OXAMYL, BHC-GAMMA.Resolved
Violation75 drinking water violations recordedContaminants: Methoxychlor, Carbofuran, Aldicarb.Resolved
Lead, 90th percentileppb · lower is better
05101520EPA action level · 15 ppb2002 — 2 ppb2005 — 4 ppb2006 — 0 ppb2007 — 0 ppb2008 — 8 ppb2009 — 0 ppb2010 — 0 ppb2011 — 1 ppb2012 — 0 ppb2013 — 0 ppb2014 — 2 ppb2015 — 0 ppb2016 — 0 ppb2017 — 2.8 ppb2018 — 0 ppb2019 — 0 ppb2020 — 0 ppb2021 — 0 ppb2022 — 0 ppb2023 — 0 ppb2024 — 1.4 ppb2025 — 0 ppb20200220092014201920242025

Down 2 ppb since 2002. Latest reading: 0 ppb (2025) — 0% of the action level. Sampled at higher-risk homes (90th percentile).

04Where Old Saybrook's water comes from

Old Saybrook's drinking water comes primarily from surface water sources such as rivers, lakes, or reservoirs.

Source

Surface Water

Rivers, lakes, or reservoirs — more exposed to runoff, agriculture, and seasonal swings than groundwater.

Treatment

Local treatment

Multi-barrier treatment: coagulation, sedimentation, filtration, and disinfection to meet EPA standards.

Distribution

1 system

1 water system, operated under private ownership.

Delivery

33,975 people

Residents served across Old Saybrook's service area.

Surface water systems require multi-stage treatment including coagulation, sedimentation, filtration, and disinfection to meet EPA Safe Drinking Water Act standards. These sources can be impacted by seasonal changes, stormwater runoff, upstream agriculture, and industrial discharge. The system is operated by private ownership and serves approximately 33,975 people through 1 water system.

System namePWSIDPopulationSource
CTWC - SHORELINE REGION-GUILFORD SYSTEM CT0608011 33,975 Surface Water

Water bodies near Old Saybrook

Indian River · river

As a surface-water system, these water bodies may directly influence Old Saybrook's drinking water supply.

05How Old Saybrook compares

Scores for nearby Connecticut cities on one line, with the average marked.

Branford
85.4 · A-
Ansonia
82.4 · B+
Derby
80.2 · B+
Old Saybrook (this city)
74.3 · B-
Bethany
55.8 · C-
Cheshire
35.5 · F

dashed line = Connecticut average (72/100)

Old Saybrook scores 74.3/100on par with the Connecticut average of 72/100. It outscores 3 of 10 nearby cities. Full Connecticut rankings →

New Haven water quality rankings
Compare all cities in the county — grades, violations, and contaminant data side by side.

06What to do at home

Steps matched to what testing actually found in Old Saybrook's water — not generic advice.

Because of pfas

Filter drinking & cooking water

Reverse osmosis system. PFAS compounds exceed EPA maximum contaminant levels

Compare tested filters →
Know your report

Read your utility's annual report

Every utility must publish a yearly Consumer Confidence Report with its own testing results. It pairs well with the independent data on this page.

How to read a CCR →
Stay informed

Watch for Old Saybrook alerts

We refresh EPA data monthly and surface new violations, advisories, and boil-water notices for your county on this page.

All water alerts →

Frequently asked questions

Is Old Saybrook, CT tap water safe to drink?

Old Saybrook's water quality earned a grade of B- (74.3/100). Some concerns have been identified. Consider a water filter for an extra layer of protection. The city ranks #37 out of 129 cities tested in Connecticut.

What contaminants are in Old Saybrook's water?

Lead was measured at 0.0 ppb (90th percentile). 7 PFAS compounds were detected. 288 violations are on record.

How is Old Saybrook's water quality grade calculated?

The grade is based on four factors: violation history (40%), lead and copper levels (25%), PFAS contamination (25%), and regulatory compliance (10%). The score is also adjusted based on how complete the available data is. See our methodology page for full details.

Do I need a water filter in Old Saybrook?

PFAS compounds exceed EPA limits — a reverse osmosis or activated carbon filter is recommended.

Where does Old Saybrook's water come from?

Old Saybrook's water is sourced from Surface water. The city has 1 water system serving approximately 33,975 residents.

Why does Old Saybrook have so many PFAS compounds in its water?

7 different PFAS "forever chemical" compounds were detected in Old Saybrook's water supply during UCMR 5 testing. PFAS contamination often originates from proximity to military installations (AFFF firefighting foam), airports, industrial manufacturing sites, or wastewater treatment facilities. Some levels exceed the 2024 EPA maximum contaminant levels — a reverse osmosis or NSF-certified activated carbon filter is strongly recommended.

How does Old Saybrook's water compare to other cities?

Old Saybrook ranks #37 out of 129 cities in Connecticut (better than 71% of state cities) and #9748 out of 15382 cities nationally (37th percentile). The grade of B- reflects the combined assessment of violation history, lead and copper levels, PFAS contamination, and regulatory compliance.

Share this reportHelp others learn about their water quality
WhatsAppXFacebookLinkedInEmail
About Old Saybrook, CT: Clinton is a town in Middlesex County, Connecticut, United States. The town is part of the Lower Connecticut River Valley Planning Region. The population of the town was 13,185 at the 2020 census. The town center along the shore line was listed as a census-designated place (CDP) by the U.S. Census Bureau in the 2020 census. Wikipedia → Sources: EPA SDWIS & ECHO · UCMR 3–5 · Lead & Copper Rule samples · EPA TRI · U.S. Drought Monitor · FEMA declarations. Data last updated Jul 2026. Analysis by the WaterVerge Editorial Team · methodology.