Skip to main content
WaterVerge

Water quality report · updated Jul 2026

Is Millbrook, AL Tap Water Safe to Drink?

Graded B- — but Copper was detected above EPA limits. Here's what's in the water and how to remove it. What to do ↓

1 contaminant over a legal limit
0.8 ppb lead, 90th percentile · low
2 unresolved violations
17K people served by 2 water systems

PWSID AL0000549 · high data confidence · local government utility

Reviewed by WaterVerge Editorial Team · Last updated July 2026
B 71.4 / 100

#307 of 351Alabama cities
How we grade →

01The verdict: is Millbrook water safe?

Millbrook's tap water meets most EPA standards but has areas that warrant attention. With a grade of B- (71.4/100), some contaminant levels or compliance issues suggest that residents may benefit from additional filtration. The city's 2 water systems serve approximately 17,283 residents using surface water (rivers, lakes, or reservoirs).

The concern

Copper is over its legal limit

Measured at 2.35 mg/L against the EPA Action Level of 1.3 mg/L. The ledger below shows how far over — and which filter removes it.

See the measurement ↓
The good news

Lead is well under the limit

90th-percentile lead is 0.8 ppb — beneath the 15 ppb federal action level and under the 5 ppb watch threshold.

See the trend ↓
Keep watching

PFBS is approaching its limit

Measured at 0.0730 µg/L — 120% of the 0.004 µg/L limit. Within the rules, but with less headroom than you'd want.

See the ledger ↓

Millbrook's drinking water received a grade of B- (71.4 out of 100), indicating fair water quality. The city's 2 water systems serve approximately 17,283 residents using purchased surface water.

Lead levels were measured at 0.8 ppb (90th percentile), well within EPA limits. UCMR 5 testing detected 7 PFAS compounds, with levels exceeding EPA maximum contaminant levels in the water supply. The system has 58 violations on record, including 0 health-based violations. 2 remain unresolved.

Millbrook ranks #307 out of 351 cities in Alabama for water quality, placing it among the lowest-rated in the state. The city draws from surface water sources, which are more susceptible to seasonal runoff and agricultural contamination, requiring extensive multi-barrier treatment including coagulation, filtration, and disinfection. Of particular concern: PFAS "forever chemical" levels exceed the 2024 EPA maximum contaminant levels. These synthetic compounds don't break down naturally and require specialized filtration such as reverse osmosis or granular activated carbon. Hexavalent chromium (chromium-6) was detected at 0.52 µg/L in UCMR 3 testing. While below California's 10 µg/L limit and with no federal MCL set, residents sensitive to this contaminant may consider reverse osmosis filtration. The system has seen 17 violations in the past five years, suggesting a pattern of compliance challenges that residents should monitor closely.

How the 71.4/100 breaks down Methodology →
ViolationsHistorical violation record including health-based and monitoring violations.
30.8 / 45C
Lead & CopperLead at 0.8 ppb (90th percentile).
16 / 20B
Contaminants7 PFAS compounds detected.
10.6 / 20D
ComplianceMonitoring and reporting compliance with EPA regulations.
10 / 10A
Source RiskWater source: Purchased surface water.
4 / 5B

02What's in Millbrook's water

Every contaminant flagged in Millbrook, on one shared scale: distance to its own legal limit. The red line is the limit — anything past it is out of compliance, and the closer a bar gets, the less headroom the system has.

10 detections · sorted by % of legal limit
Over the limit Elevated — watch Within limits
0 50% LEGAL LIMIT 150%

Over Limit — EPA Action Level: 1.3 mg/L

Exceeds the EPA action level. Copper leaches from household plumbing — flush taps for 30 seconds before drinking, and consider a certified filter.
Exceeds Limit What to do →
Manganese Inorganic
48.5 µg/L 97% of limit
1,4-Dioxane Organic
0.10 µg/L 29% of limit
Strontium Inorganic
160.0 µg/L 11% of limit
Molybdenum Inorganic
1.80 µg/L 5% of limit
Vanadium Inorganic
0.40 µg/L 2% of limit
39 contaminants tested under EPA SDWIS, LCR and UCMR programs · 16 detected · 2 PFAS over EPA MCL · PFAS hazard index 9.50 (above the 1.0 threshold) Contaminants without a federal MCL are shown against the strictest state or advisory level named in each row.

Full contaminants report

Contaminant Detected Level EPA Limit Unit Category Status
Lead (90th percentile) 0.8 15 ppb Inorganic Safe
Copper (90th percentile) 2.35 1.3 mg/L Inorganic Over Limit
11Cl-PF3OUdS ND HI µg/L PFAS Not Detected
4:2 FTS ND HI µg/L PFAS Not Detected
6:2 FTS ND HI µg/L PFAS Not Detected
8:2 FTS ND HI µg/L PFAS Not Detected
9Cl-PF3ONS ND HI µg/L PFAS Not Detected
ADONA ND HI µg/L PFAS Not Detected
HFPO-DA ND 0.01 µg/L PFAS Not Detected
lithium ND HI µg/L PFAS Not Detected
NEtFOSAA ND HI µg/L PFAS Not Detected
NFDHA ND HI µg/L PFAS Not Detected
NMeFOSAA ND HI µg/L PFAS Not Detected
PFBA 0.012 HI µg/L PFAS Detected
PFBS 0.073 HI µg/L PFAS Detected
PFDA ND HI µg/L PFAS Not Detected
PFDoA ND HI µg/L PFAS Not Detected
PFEESA ND HI µg/L PFAS Not Detected
PFHpA 0.006 HI µg/L PFAS Detected
PFHpS ND HI µg/L PFAS Not Detected
PFHxA 0.017 HI µg/L PFAS Detected
PFHxS ND HI µg/L PFAS Not Detected
PFMBA ND HI µg/L PFAS Not Detected
PFMPA ND HI µg/L PFAS Not Detected
PFNA ND HI µg/L PFAS Not Detected
PFOA 0.019 0.004 µg/L PFAS Over MCL
PFOS 0.019 0.004 µg/L PFAS Over MCL
PFPeA 0.027 HI µg/L PFAS Detected
PFPeS ND HI µg/L PFAS Not Detected
PFTA ND HI µg/L PFAS Not Detected
PFTrDA ND HI µg/L PFAS Not Detected
PFUnA ND HI µg/L PFAS Not Detected
Data source: EPA SDWIS, UCMR 5, local utility CCR.

03Millbrook's ten-year track record

Each box is one year. A green check means no EPA violations; a numbered badge counts that year's violations — red if any were health-based, amber if they were monitoring or paperwork issues. The system has 58 violations on record, including 0 health-based violations. 2 remain unresolved.

4 of the last ten years were clean. The numbered years had EPA violations — red when any were health-based, amber when they were paperwork or missed-testing issues.

54 monitoring & paperwork 1 still unresolved
PFAS7 PFAS "forever chemical" compounds detectedPFAS levels exceed EPA maximum contaminant levels. Reverse osmosis or activated carbon filtration recommended.
UpdateWater quality data updatedLatest EPA compliance and testing data incorporated into Millbrook's water quality assessment. Grade: B- (71.4/100).
Violation2 drinking water violations recordedContaminants: TTHM, Total Haloacetic Acids (HAA5).Resolved
DisasterHURRICANE HELENEFederal disaster declaration (FEMA DR-3618). Hurricane event — may have impacted local water infrastructure.
Violation4 drinking water violations recordedContaminants: Total Haloacetic Acids (HAA5), TTHM.Resolved
Violation2 drinking water violations recordedContaminants: TTHM, Total Haloacetic Acids (HAA5).Resolved
Lead, 90th percentileppb · lower is better
05101520EPA action level · 15 ppb1992 — 5 ppb1993 — 5 ppb1994 — 5 ppb1995 — 5 ppb1996 — 3 ppb1998 — 5 ppb1999 — 3 ppb2001 — 5 ppb2002 — 3 ppb2004 — 5 ppb2006 — 3 ppb2007 — 5 ppb2009 — 1.8 ppb2010 — 5 ppb2012 — 2.1 ppb2013 — 5 ppb2015 — 0.60 ppb2016 — 5 ppb2018 — 0.21 ppb2019 — 0 ppb2021 — 0.47 ppb2022 — 0 ppb2025 — 0 ppb2027 — 0.84 ppb50.84199219982006201320212027

Down 4.2 ppb since 1992. Latest reading: 0.84 ppb (2027) — 6% of the action level. Sampled at higher-risk homes (90th percentile).

Copper, 90th percentilemg/L · lower is better
0123EPA action level · 1.3 mg/L1993 — 2.4 mg/L1994 — 2.4 mg/L2.42.419931994

Down 0 mg/L since 1993. The latest reading (2.4 mg/L, 1994) is over the action level. Sampled at higher-risk homes (90th percentile).

04Where Millbrook's water comes from

Millbrook's drinking water comes primarily from surface water sources such as rivers, lakes, or reservoirs.

Source

Purchased Surface Water

Rivers, lakes, or reservoirs — more exposed to runoff, agriculture, and seasonal swings than groundwater.

Treatment

Wholesale supplier

Multi-barrier treatment: coagulation, sedimentation, filtration, and disinfection to meet EPA standards.

Distribution

2 systems

2 water systems, operated under local government ownership.

Delivery

17,283 people

Residents served across Millbrook's service area.

Surface water systems require multi-stage treatment including coagulation, sedimentation, filtration, and disinfection to meet EPA Safe Drinking Water Act standards. These sources can be impacted by seasonal changes, stormwater runoff, upstream agriculture, and industrial discharge. The system is operated by local government ownership and serves approximately 17,283 people through 2 water systems.

System namePWSIDPopulationSource
TRI COMMUNITY WATER SYSTEM AL0000549 11,832 Purchased Surface Water
MILLBROOK UTILITIES AL0000539 5,451 Purchased Surface Water

Water bodies near Millbrook

Alabama River · river

As a surface-water system, these water bodies may directly influence Millbrook's drinking water supply.

05Pressure on Millbrook's watershed

Outside forces that shape what reaches the treatment plant. None of these is a verdict on the tap by itself — but each adds pressure worth knowing about.

Industrial discharge

Moderate — reported releases upstream

5 facilities within 10 miles reported 77k lb released to surface water in the latest EPA Toxics Release Inventory. Proximity doesn't equal tap contamination — treatment and hydrology decide — but it's pressure on the watershed.

INTERNATIONAL PAPER — manganese and manganese compounds 77k lb · 7.1 mi
JAMES HARDIE PRATTVILLE 0 lb · 4.8 mi
ACME BRICK TILE & STONE MONTGOMERY PLANT 0 lb · 8.5 mi
+ 2 more facilities

Flood & storm history

Recurring — declared disasters

10 federal disaster declarations on record for Elmore County. Flooding and severe storms can overwhelm treatment plants, cause sewage overflows, and push runoff into supplies.

HURRICANE HELENE Sep 2024 · DR-3618
HURRICANE ZETA Dec 2020 · DR-4573
HURRICANE SALLY Sep 2020 · DR-3545

Superfund proximity

Low — tracked and monitored

1 National Priorities List site within 10 miles. Proximity does not necessarily indicate tap-water contamination — the connection depends on hydrology and treatment.

06How Millbrook compares

Scores for nearby Alabama cities on one line, with the average marked.

Birmingham
89.2 · A-
Montgomery
88.7 · A-
Mobile
87.9 · A-
Tuscaloosa
87.6 · A-
Millbrook (this city)
71.4 · B-
Huntsville
69.8 · C+

dashed line = Alabama average (78/100)

Millbrook scores 71.4/100below the Alabama average of 78/100. It outscores 2 of 10 nearby cities. Full Alabama rankings →

Elmore water quality rankings
Compare all cities in the county — grades, violations, and contaminant data side by side.

07What to do at home

Steps matched to what testing actually found in Millbrook's water — not generic advice.

Because of pfas

Filter drinking & cooking water

Reverse osmosis system. PFAS compounds exceed EPA maximum contaminant levels

Compare tested filters →
Know your report

Read your utility's annual report

Every utility must publish a yearly Consumer Confidence Report with its own testing results. It pairs well with the independent data on this page.

How to read a CCR →
Stay informed

Watch for Millbrook alerts

This area has a history of flood declarations — after severe weather, watch for boil-water advisories from the utility, and check the live alerts on this page.

All water alerts →

Frequently asked questions

Is Millbrook, AL tap water safe to drink?

Millbrook's water quality earned a grade of B- (71.4/100). Some concerns have been identified. Consider a water filter for an extra layer of protection. The city ranks #307 out of 351 cities tested in Alabama.

What contaminants are in Millbrook's water?

Lead was measured at 0.8 ppb (90th percentile). 7 PFAS compounds were detected. 58 violations are on record.

How is Millbrook's water quality grade calculated?

The grade is based on four factors: violation history (40%), lead and copper levels (25%), PFAS contamination (25%), and regulatory compliance (10%). The score is also adjusted based on how complete the available data is. See our methodology page for full details.

Do I need a water filter in Millbrook?

PFAS compounds exceed EPA limits — a reverse osmosis or activated carbon filter is recommended.

Where does Millbrook's water come from?

Millbrook's water is sourced from Purchased surface water. The city has 2 water systems serving approximately 17,283 residents.

Why does Millbrook have so many PFAS compounds in its water?

7 different PFAS "forever chemical" compounds were detected in Millbrook's water supply during UCMR 5 testing. PFAS contamination often originates from proximity to military installations (AFFF firefighting foam), airports, industrial manufacturing sites, or wastewater treatment facilities. Some levels exceed the 2024 EPA maximum contaminant levels — a reverse osmosis or NSF-certified activated carbon filter is strongly recommended.

How does Millbrook's water compare to other cities?

Millbrook ranks #307 out of 351 cities in Alabama (better than 13% of state cities) and #10407 out of 15382 cities nationally (32th percentile). The grade of B- reflects the combined assessment of violation history, lead and copper levels, PFAS contamination, and regulatory compliance.

Share this reportHelp others learn about their water quality
WhatsAppXFacebookLinkedInEmail
About Millbrook, AL: Median household income $63,521 · median home value $187,725 · median age 36.8 · 74.4% homeowners · 31.1% college educated. Service area: 2 ZIP codes across Elmore.
Show ZIP codes 3602236054
Sources: EPA SDWIS & ECHO · UCMR 3–5 · Lead & Copper Rule samples · EPA TRI · U.S. Drought Monitor · FEMA declarations. Data last updated Jul 2026. Analysis by the WaterVerge Editorial Team · methodology.