Is Milford, OH Tap Water Safe to Drink?
Graded D — but Copper and PFOS were detected above EPA limits. Here's what's in the water and how to remove it. What to do next ↓
49.2/100
waterverge.com Milford, OH — Water Quality Report
Milford's drinking water received a grade of D (49.2 out of 100), indicating poor water quality. The city's 1 water system serves approximately 6,700 residents using groundwater.
Lead levels were measured at 0.0 ppb (90th percentile), well within EPA limits. UCMR 5 testing detected 7 PFAS compounds, with levels exceeding EPA maximum contaminant levels in the water supply.
The system has 187 violations on record, including 1 health-based violation. 11 remain unresolved.
What to know about Milford's water
Milford ranks #483 out of 511 cities in Ohio for water quality, placing it among the lowest-rated in the state.
Milford relies on groundwater, which is generally less vulnerable to surface contamination but can be affected by naturally occurring minerals like arsenic and nitrate, as well as agricultural and industrial runoff.
Of particular concern: PFAS "forever chemical" levels exceed the 2024 EPA maximum contaminant levels. These synthetic compounds don't break down naturally and require specialized filtration such as reverse osmosis or granular activated carbon.
The system has seen 28 violations in the past five years, suggesting a pattern of compliance challenges that residents should monitor closely.
Water quality score
See methodology →Is Milford, OH water safe to drink?
Milford's drinking water has significant quality concerns based on EPA testing data. With a grade of D (49.2/100), the system has issues across multiple categories. A water filter is recommended for all residents. The city's 1 water system serves approximately 6,700 residents using groundwater (wells).
Recent water quality updates for Milford
A timeline of significant water quality events, violations, and data updates.
PFAS levels exceed EPA maximum contaminant levels. Reverse osmosis or activated carbon filtration recommended.
Latest EPA compliance and testing data incorporated into Milford's water quality assessment. Grade: D (49.2/100).
Contaminants: Consumer Confidence Rule.
Contaminants: Consumer Confidence Rule.
Contaminants: 1,2,4-Trichlorobenzene, Xylenes, Total, o-Dichlorobenzene.
Federal disaster declaration (FEMA DR-3250). Hurricane event — may have impacted local water infrastructure.
Key contaminant findings
Based on the most recent EPA sampling data for Milford's water supply.
Well within EPA limits.
Exceeds EPA action level. Copper can leach from household plumbing — flush taps for 30 seconds before drinking.
PFAS "forever chemicals" exceed EPA maximum contaminant levels. Reverse osmosis or granular activated carbon filtration strongly recommended.
PFAS "forever chemicals" detected
UCMR 5 testing found 7 PFAS compounds in Milford's water supply. PFAS are synthetic chemicals that persist indefinitely in the environment and the human body.
Violation history
Milford's water system has 187 total violations on record, including 1 health-based violation. 11 remain unresolved. 28 violations were issued in the last 5 years.
Flood & environmental risk
Clermont County has experienced 4 federally declared disasters since 1968. Flooding and severe storms can overwhelm water treatment plants, cause sewage overflows, and introduce agricultural runoff, bacteria, and sediment into drinking water supplies. Local water sources include Fourmile Creek, O'Bannon Creek Near Loveland, Little Miami River At Milford, East Fork Little Miami River At Perintown, Mill Creek At Kemper Road At Sharonville.
Where does Milford's water come from?
Milford's drinking water comes from groundwater (wells), supplied by 1 water system serving approximately 6,700 people. Groundwater is generally less susceptible to surface contamination but can contain naturally occurring contaminants like arsenic, radon, and nitrate. Nearby water bodies include Fourmile Creek (river), O'Bannon Creek Near Loveland (river), Little Miami River At Milford (river), East Fork Little Miami River At Perintown (river), Mill Creek At Kemper Road At Sharonville (river).
What Milford residents can do
Recommended: Reverse osmosis system. This addresses the specific contaminants found in Milford's water.
Your water utility is required to publish an annual Consumer Confidence Report (CCR) with detailed testing results. Ask for the latest copy or check your utility's website.
Milford's area has a history of flooding. After severe weather, watch for boil water advisories from your local utility.
Data: EPA SDWIS, UCMR 5 (PFAS), FEMA, NOAA. Last updated May 2026.
Top contaminants to know
View all ↓Forever chemicals overview
National PFAS report →Violation summary
Violations & advisories
Top industrial polluters within 10 miles of Milford
Industrial polluters nearby
Reported releases to surface water by facilities near Milford, ranked by pounds discharged annually.
Total reported releases to surface water: 153 lbs
| Facility | Top chemical | To surface water (lbs/yr) | Distance |
|---|---|---|---|
SHEPHERD CHEMICAL CO CINCINNATI, OH45212 | Nitrate compounds (water dissociable; reportable only when in aqueous solution) | 95 | 8.5 mi |
EMD MILLIPORE CORP CINCINNATI, OH45212 | Methanol | 58 | 8.1 mi |
SUPERALLOY MANUFACTURING SOLUTIONS CORP PLANT 1 CINCINNATI, OH45242 | Nickel And Nickel Compounds | 0 | 8.3 mi |
SUN CHEMICAL CORP AMELIA PLANT AMELIA, OH45102 | — | — | 7.7 mi |
SOLUTIONS PLUS INC AMELIA, OH45102 | — | — | 7.7 mi |
Source: EPA Toxic Release Inventory (TRI) 2023
Superfund sites within 10 miles of Milford
Superfund sites nearby
Federally tracked hazardous-waste sites on the EPA National Priorities List. Proximity does not necessarily indicate tap-water contamination — the connection depends on hydrology and treatment.
- MILFORD CONTAMINATED AQUIFER1.0 mi
- PRISTINE INC9.5 mi
Source: EPA Superfund National Priorities List
Flood & disaster history
Clermont County has experienced 4 federally declared disasters since 1968. Flooding and severe weather can compromise water treatment infrastructure and introduce contaminants into drinking water supplies.
Recommended water filters
Based on contaminants detected in Milford's water supply, we recommend the following filter types.
Full contaminants report
| Contaminant | Detected Level | EPA Limit | Unit | Category | Status |
|---|---|---|---|---|---|
| Lead (90th percentile) LeadHeavy Metal A toxic heavy metal that can leach into drinking water from older pipes, solder, and fixtures. No amount of lead in water is considered safe. Health EffectsBrain and nervous system damage in children, kidney damage, high blood pressure, and reproductive problems in adults. EPA Limit15 ppb action level Common SourcesCorrosion of lead pipes, lead solder, brass faucets, and household plumbing. | 0.0 | 15 | ppb | Inorganic | Safe |
| Copper (90th percentile) CopperInorganic A metal that enters drinking water mainly through corrosion of copper plumbing. Small amounts are essential for health, but excess levels are harmful. Health EffectsGastrointestinal distress (nausea, vomiting, diarrhea) at short-term high levels; liver and kidney damage from long-term exposure. EPA Limit1.3 mg/L action level Common SourcesCorrosion of copper household plumbing, erosion of natural deposits. | 60.00 | 1.3 | mg/L | Inorganic | Over Limit |
| 11Cl-PF3OUdS | ND | HI | µg/L | PFAS | Not Detected |
| 4:2 FTS | ND | HI | µg/L | PFAS | Not Detected |
| 6:2 FTS 6:2 FTSPFAS A fluorotelomer sulfonate commonly found at sites contaminated with aqueous film-forming foam (AFFF) used in firefighting. Health EffectsPotential liver toxicity and endocrine disruption. Less studied but identified as a contaminant of concern. EPA LimitNo individual MCL (not yet regulated) Common SourcesFirefighting foam (AFFF), airports, military bases, and industrial facilities. | ND | HI | µg/L | PFAS | Not Detected |
| 8:2 FTS | ND | HI | µg/L | PFAS | Not Detected |
| 9Cl-PF3ONS | ND | HI | µg/L | PFAS | Not Detected |
| ADONA | ND | HI | µg/L | PFAS | Not Detected |
| HFPO-DA HFPO-DA (GenX)PFAS A replacement for PFOA in manufacturing, marketed as safer but still a persistent "forever chemical." Also known as GenX. Health EffectsLiver and kidney effects, reproductive toxicity, immune system effects, and potential cancer risk. EPA Limit10 ppt MCL Common SourcesFluoropolymer manufacturing (used as PFOA replacement), industrial wastewater discharge. | ND | 0.01 | µg/L | PFAS | Not Detected |
| lithium LithiumInorganic A naturally occurring alkali metal found in groundwater. Monitored under UCMR 5 to assess occurrence in drinking water. Health EffectsKidney effects at high doses. Low-level exposure effects under study; some research suggests neurological effects. EPA LimitNo MCL (monitoring only under UCMR 5) Common SourcesNatural mineral deposits, geothermal water, and industrial discharge. | ND | HI | µg/L | PFAS | Not Detected |
| NEtFOSAA | ND | HI | µg/L | PFAS | Not Detected |
| NFDHA | ND | HI | µg/L | PFAS | Not Detected |
| NMeFOSAA | ND | HI | µg/L | PFAS | Not Detected |
| PFBA PFBAPFAS One of the shortest-chain PFAS compounds. Very mobile in water and difficult to remove with standard filtration. Health EffectsThyroid effects, potential developmental toxicity. Shorter half-life in body than long-chain PFAS. EPA LimitNo individual MCL (not yet regulated) Common SourcesDegradation of longer-chain PFAS, industrial discharge, and firefighting foam. | 0.006 | HI | µg/L | PFAS | Detected |
| PFBS PFBSPFAS A short-chain PFAS used as a replacement for PFOS. While it clears the body faster than long-chain PFAS, it still persists in the environment. Health EffectsThyroid effects, reproductive and developmental toxicity, kidney effects. EPA LimitPart of Hazard Index (1.0) Common SourcesIndustrial discharge, firefighting foam, and as a replacement chemical in manufacturing. | 0.005 | HI | µg/L | PFAS | Detected |
| PFDA | ND | HI | µg/L | PFAS | Not Detected |
| PFDoA | ND | HI | µg/L | PFAS | Not Detected |
| PFEESA | ND | HI | µg/L | PFAS | Not Detected |
| PFHpA PFHpAPFAS A medium-chain PFAS compound found in various environmental samples. Less studied than PFOA/PFOS but still considered a contaminant of concern. Health EffectsLiver effects, potential developmental toxicity, and endocrine disruption. EPA LimitPart of Hazard Index (1.0) Common SourcesDegradation of longer-chain PFAS, industrial discharge, and contaminated water sources. | ND | HI | µg/L | PFAS | Not Detected |
| PFHpS | ND | HI | µg/L | PFAS | Not Detected |
| PFHxA PFHxAPFAS A short-chain PFAS replacement chemical widely used after manufacturers phased out longer-chain PFAS. Very commonly detected in water. Health EffectsLiver and kidney effects, potential thyroid disruption. Considered less toxic than long-chain PFAS but still persistent. EPA LimitNo individual MCL (not yet regulated) Common SourcesIndustrial processes, firefighting foam (AFFF), food packaging, and textile treatment. | 0.004 | HI | µg/L | PFAS | Detected |
| PFHxS PFHxSPFAS A medium-chain PFAS found in firefighting foam and consumer products. It has a long half-life in the human body, similar to long-chain PFAS. Health EffectsImmune system effects, thyroid disruption, and potential reproductive and developmental harm. EPA LimitPart of Hazard Index (1.0) Common SourcesFirefighting foam (AFFF), waterproof textiles, food packaging, and industrial discharge. | 0.003 | HI | µg/L | PFAS | Detected |
| PFMBA | ND | HI | µg/L | PFAS | Not Detected |
| PFMPA | ND | HI | µg/L | PFAS | Not Detected |
| PFNA PFNAPFAS A long-chain PFAS compound used in manufacturing fluoropolymers. It bioaccumulates in the body and is very persistent in the environment. Health EffectsDevelopmental effects, liver toxicity, immune suppression, and potential cancer risk. EPA LimitPart of Hazard Index (1.0) Common SourcesFluoropolymer manufacturing, industrial emissions, and contaminated water sources. | ND | HI | µg/L | PFAS | Not Detected |
| PFOA PFOAPFAS A long-chain PFAS ("forever chemical") once widely used in nonstick coatings and firefighting foam. It persists in the body and environment for years. Health EffectsLinked to kidney and testicular cancer, thyroid disease, elevated cholesterol, and reproductive issues. EPA Limit4.0 ppt MCL Common SourcesIndustrial discharge, firefighting foam (AFFF), nonstick cookware manufacturing, and contaminated groundwater. | 0.004 | 0.004 | µg/L | PFAS | Over MCL |
| PFOS PFOSPFAS A long-chain PFAS compound historically used in stain-resistant coatings and firefighting foam. One of the most studied and persistent PFAS chemicals. Health EffectsLiver damage, immune system suppression, thyroid disruption, increased cholesterol, and potential cancer risk. EPA Limit4.0 ppt MCL Common SourcesFirefighting foam (AFFF), industrial sites, stain-resistant fabric treatments, and contaminated groundwater. | 0.008 | 0.004 | µg/L | PFAS | Over MCL |
| PFPeA PFPeAPFAS A short-chain PFAS compound commonly detected in drinking water. One of the most frequently found PFAS in UCMR 5 monitoring. Health EffectsLess studied than PFOA/PFOS. Potential liver and thyroid effects. Research is ongoing. EPA LimitNo individual MCL (not yet regulated) Common SourcesIndustrial discharge, firefighting foam degradation, and consumer products. | 0.005 | HI | µg/L | PFAS | Detected |
| PFPeS | ND | HI | µg/L | PFAS | Not Detected |
| PFTA | ND | HI | µg/L | PFAS | Not Detected |
| PFTrDA | ND | HI | µg/L | PFAS | Not Detected |
| PFUnA | ND | HI | µg/L | PFAS | Not Detected |
Lead level trend (90th percentile)
Copper level (90th percentile)
Latest reading: 60.000 mg/L (2005)
EPA action level: 1.3 mg/L
See how Milford compares by contaminant
Explore where Milford ranks among all Ohio cities for specific contaminants.
Water source & infrastructure
Where Milford's water comes from
Milford's drinking water is drawn from underground aquifers through wells.
Groundwater is naturally filtered through rock and soil layers, generally requiring less treatment than surface water. However, it can contain naturally occurring contaminants like arsenic, radon, and minerals.
Agricultural activity, septic systems, and industrial operations near well fields can introduce nitrates, pesticides, and volatile organic compounds.
The system is operated by local government ownership and serves approximately 6,700 people through 1 water system.
Water bodies near Milford
Milford is located near 5 notable water bodies. These water bodies contribute to the regional watershed and may indirectly affect groundwater quality.
Water systems serving Milford
| System Name | PWSID | Population | Source |
|---|---|---|---|
| MILFORD CITY PWS | OH1301012 | 6,700 | GW |
How Milford compares
Full Ohio rankings →Milford's score of 49.2/100 is below the average of 58/100 among major Ohio cities. It outscores 4 of 10 nearby cities. 6 of 10 nearby cities score higher.
Nearby cities
View Ohio rankings →About Milford, OH
Wikipedia →Milford is a city in Clermont and Hamilton counties in the U.S. state of Ohio. Settled in 1796, Milford is the westernmost city in Appalachian Ohio, and located along the Little Miami River and its East Fork in the southwestern part of the state, it is a part of the Cincinnati metropolitan area. The population was 6,582 at the 2020 census.
Learn more about your water
Guides and resources related to Milford's water quality findings.
Explore water quality across Clermont
Frequently asked questions
Is Milford, OH tap water safe to drink?
Milford's water quality earned a grade of D (49.2/100). Significant issues have been found. A water filter is strongly recommended. The city ranks #483 out of 511 cities tested in Ohio.
What contaminants are in Milford's water?
Lead was measured at 0.0 ppb (90th percentile). 7 PFAS compounds were detected. 187 violations are on record.
How is Milford's water quality grade calculated?
The grade is based on four factors: violation history (40%), lead and copper levels (25%), PFAS contamination (25%), and regulatory compliance (10%). The score is also adjusted based on how complete the available data is. See our methodology page for full details.
Do I need a water filter in Milford?
PFAS compounds exceed EPA limits — a reverse osmosis or activated carbon filter is recommended.
Where does Milford's water come from?
Milford's water is sourced from Groundwater. The city has 1 water system serving approximately 6,700 residents.
What health violations has Milford's water system had?
Milford has 1 health-based violation on record. The most recent violation was recorded in December 2025. Health-based violations mean the water exceeded EPA maximum contaminant levels (MCLs) for a regulated substance. 11 violations remain unresolved.
Is Milford's groundwater at risk of contamination?
Milford uses groundwater, which can be affected by naturally occurring contaminants like arsenic, radon, and nitrate, as well as agricultural runoff and industrial activity. The system has 187 violations on record that may relate to groundwater quality. Groundwater systems are generally less susceptible to surface contamination but should be monitored for emerging contaminants like PFAS.
Why does Milford have so many PFAS compounds in its water?
7 different PFAS "forever chemical" compounds were detected in Milford's water supply during UCMR 5 testing. PFAS contamination often originates from proximity to military installations (AFFF firefighting foam), airports, industrial manufacturing sites, or wastewater treatment facilities. Some levels exceed the 2024 EPA maximum contaminant levels — a reverse osmosis or NSF-certified activated carbon filter is strongly recommended.
How does Milford's water compare to other cities?
Milford ranks #483 out of 511 cities in Ohio (better than 5% of state cities) and #13264 out of 15744 cities nationally (16th percentile). The grade of D reflects the combined assessment of violation history, lead and copper levels, PFAS contamination, and regulatory compliance.