Skip to main content
WaterVerge

Water quality report · updated Jul 2026

Is Kent, OH Tap Water Safe to Drink?

Graded F — but Copper, PFOA and 1 more were detected above EPA limits. Here's what's in the water and how to remove it. What to do ↓

3 contaminants over a legal limit
0.0 ppb lead, 90th percentile · low
51 unresolved violations
311K people served by 10 water systems

PWSID OH7700011 · high data confidence · local government utility

Reviewed by WaterVerge Editorial Team · Last updated July 2026
F 38.2 / 100

#504 of 511Ohio cities
How we grade →

01The verdict: is Kent water safe?

Kent's drinking water has significant quality concerns based on EPA testing data. With a grade of F (38.2/100), the system has issues across multiple categories. A water filter is recommended for all residents. The city's 10 water systems serve approximately 310,635 residents using surface water (rivers, lakes, or reservoirs).

The concern

Copper is over its legal limit

Measured at 50.00 mg/L against the EPA Action Level of 1.3 mg/L. The ledger below shows how far over — and which filter removes it.

See the measurement ↓
The good news

Lead is well under the limit

90th-percentile lead is 0.0 ppb — beneath the 15 ppb federal action level and under the 5 ppb watch threshold.

See the trend ↓
Keep watching

HAA5 is approaching its limit

Measured at 43.1 µg/L — 72% of the 60 µg/L limit. Within the rules, but with less headroom than you'd want.

See the ledger ↓

Kent's drinking water received a grade of F (38.2 out of 100), indicating failing water quality. The city's 10 water systems serve approximately 310,635 residents using surface water.

Lead levels were measured at 0.0 ppb (90th percentile), well within EPA limits. UCMR 5 testing detected 2 PFAS compounds, with levels exceeding EPA maximum contaminant levels in the water supply. The system has 488 violations on record, including 36 health-based violations. 51 remain unresolved.

Kent ranks #504 out of 511 cities in Ohio for water quality, placing it among the lowest-rated in the state. The city draws from surface water sources, which are more susceptible to seasonal runoff and agricultural contamination, requiring extensive multi-barrier treatment including coagulation, filtration, and disinfection. Of particular concern: PFAS "forever chemical" levels exceed the 2024 EPA maximum contaminant levels. These synthetic compounds don't break down naturally and require specialized filtration such as reverse osmosis or granular activated carbon. Haloacetic acid (HAA5) levels were elevated at 43.1 µg/L in UCMR 4 testing, though below the 60 µg/L EPA limit. Activated carbon filtration can help reduce these disinfection byproducts. Hexavalent chromium (chromium-6) was detected at 0.20 µg/L in UCMR 3 testing. While below California's 10 µg/L limit and with no federal MCL set, residents sensitive to this contaminant may consider reverse osmosis filtration. The system has seen 14 violations in the past five years, suggesting a pattern of compliance challenges that residents should monitor closely.

How the 38.2/100 breaks down Methodology →
ViolationsHistorical violation record including health-based and monitoring violations.
0 / 45F
Lead & CopperLead at 0.0 ppb (90th percentile).
16 / 20B
Contaminants2 PFAS compounds detected.
10.2 / 20D
ComplianceMonitoring and reporting compliance with EPA regulations.
8 / 10B
Source RiskWater source: Surface water.
4 / 5B

02What's in Kent's water

Every contaminant flagged in Kent, on one shared scale: distance to its own legal limit. The red line is the limit — anything past it is out of compliance, and the closer a bar gets, the less headroom the system has.

11 detections · sorted by % of legal limit
Over the limit Elevated — watch Within limits
0 50% LEGAL LIMIT 150%

Over Limit — EPA Action Level: 1.3 mg/L

Exceeds the EPA action level. Copper leaches from household plumbing — flush taps for 30 seconds before drinking, and consider a certified filter.
Exceeds Limit What to do →
Chlorate Disinfection Byproduct
854.0 µg/L 120% of limit
Manganese Inorganic
37.3 µg/L 75% of limit
NDMA (N-Nitrosodimethylamine) Disinfection Byproduct
3.2 ng/L 32% of limit
Vanadium Inorganic
1.80 µg/L 9% of limit
Strontium Inorganic
99.4 µg/L 7% of limit
Molybdenum Inorganic
1.38 µg/L 3% of limit
40 contaminants tested under EPA SDWIS, LCR and UCMR programs · 12 detected · 1 PFAS over EPA MCL · PFAS hazard index 1.82 (above the 1.0 threshold) Contaminants without a federal MCL are shown against the strictest state or advisory level named in each row.

Full contaminants report

Contaminant Detected Level EPA Limit Unit Category Status
Lead (90th percentile) 0.0 15 ppb Inorganic Safe
Copper (90th percentile) 50.00 1.3 mg/L Inorganic Over Limit
11Cl-PF3OUdS ND HI µg/L PFAS Not Detected
4:2 FTS ND HI µg/L PFAS Not Detected
6:2 FTS ND HI µg/L PFAS Not Detected
8:2 FTS ND HI µg/L PFAS Not Detected
9Cl-PF3ONS ND HI µg/L PFAS Not Detected
ADONA ND HI µg/L PFAS Not Detected
HFPO-DA ND 0.01 µg/L PFAS Not Detected
lithium ND HI µg/L PFAS Not Detected
NEtFOSAA ND HI µg/L PFAS Not Detected
NFDHA ND HI µg/L PFAS Not Detected
NMeFOSAA ND HI µg/L PFAS Not Detected
PFBA 0.005 HI µg/L PFAS Detected
PFBS ND HI µg/L PFAS Not Detected
PFDA ND HI µg/L PFAS Not Detected
PFDoA ND HI µg/L PFAS Not Detected
PFEESA ND HI µg/L PFAS Not Detected
PFHpA ND HI µg/L PFAS Not Detected
PFHpS ND HI µg/L PFAS Not Detected
PFHxA ND HI µg/L PFAS Not Detected
PFHxS ND HI µg/L PFAS Not Detected
PFMBA ND HI µg/L PFAS Not Detected
PFMPA ND HI µg/L PFAS Not Detected
PFNA ND HI µg/L PFAS Not Detected
PFOA 0.007 0.004 µg/L PFAS Over MCL
PFOS ND 0.004 µg/L PFAS Not Detected
PFPeA ND HI µg/L PFAS Not Detected
PFPeS ND HI µg/L PFAS Not Detected
PFTA ND HI µg/L PFAS Not Detected
PFTrDA ND HI µg/L PFAS Not Detected
PFUnA ND HI µg/L PFAS Not Detected
Data source: EPA SDWIS, UCMR 5, local utility CCR.

03Kent's ten-year track record

Each box is one year. A green check means no EPA violations; a numbered badge counts that year's violations — red if any were health-based, amber if they were monitoring or paperwork issues. The system has 488 violations on record, including 36 health-based violations. 51 remain unresolved.

2 of the last ten years were clean. The numbered years had EPA violations — red when any were health-based, amber when they were paperwork or missed-testing issues.

2 health-based in 10 yrs 22 monitoring & paperwork 18 still unresolved
PFAS2 PFAS "forever chemical" compounds detectedPFAS levels exceed EPA maximum contaminant levels. Reverse osmosis or activated carbon filtration recommended.
UpdateWater quality data updatedLatest EPA compliance and testing data incorporated into Kent's water quality assessment. Grade: F (38.2/100).
Violation1 drinking water violation recordedContaminants: Consumer Confidence Rule.Open
Violation1 drinking water violation recordedContaminants: Consumer Confidence Rule.Open
Violation2 drinking water violations recorded1 health-based. Contaminants: LEAD AND COPPER RULE REVISIONS, Total Haloacetic Acids (HAA5).Open
DisasterHURRICANE KATRINA EVACUATIONFederal disaster declaration (FEMA DR-3250). Hurricane event — may have impacted local water infrastructure.
Lead, 90th percentileppb · lower is better
01000200030004000EPA action level · 15 ppb1992 — 8.7 ppb1993 — 33 ppb1994 — 0 ppb1995 — 3 ppb1996 — 6.4 ppb1997 — 4.7 ppb1998 — 6.4 ppb1999 — 5 ppb2000 — 5.9 ppb2001 — 6.5 ppb2002 — 5 ppb2003 — 3 ppb2004 — 3.6 ppb2005 — 2650 ppb2007 — 0 ppb2010 — 2.4 ppb2011 — 5.8 ppb2012 — 4.5 ppb2013 — 2.9 ppb2014 — 1.4 ppb2015 — 9.8 ppb2016 — 0.57 ppb2017 — 1.4 ppb2018 — 2.3 ppb2019 — 2.4 ppb2020 — 1.6 ppb2021 — 4.1 ppb2022 — 1.7 ppb2023 — 1.0 ppb2024 — 1.8 ppb2025 — 2.7 ppb8.72.7199219992007201620232025

Down 6.0 ppb since 1992. Latest reading: 2.7 ppb (2025) — 18% of the action level. Sampled at higher-risk homes (90th percentile).

Copper, 90th percentilemg/L · lower is better
050100150200250EPA action level · 1.3 mg/L2004 — 201 mg/L2005 — 122 mg/L20112220042005

Down 79 mg/L since 2004. The latest reading (122 mg/L, 2005) is over the action level. Sampled at higher-risk homes (90th percentile).

04Where Kent's water comes from

Kent's drinking water comes primarily from surface water sources such as rivers, lakes, or reservoirs.

Source

Surface Water

Rivers, lakes, or reservoirs — more exposed to runoff, agriculture, and seasonal swings than groundwater.

Treatment

Local treatment

Multi-barrier treatment: coagulation, sedimentation, filtration, and disinfection to meet EPA standards.

Distribution

10 systems

10 water systems, operated under local government ownership.

Delivery

310,635 people

Residents served across Kent's service area.

Surface water systems require multi-stage treatment including coagulation, sedimentation, filtration, and disinfection to meet EPA Safe Drinking Water Act standards. These sources can be impacted by seasonal changes, stormwater runoff, upstream agriculture, and industrial discharge. The system is operated by local government ownership and serves approximately 310,635 people through 10 water systems.

System namePWSIDPopulationSource
AKRON CITY PWS OH7700011 280,000 Surface Water
KENT CITY PWS OH6701812 29,662 Groundwater
SPRING LAKES MOBILE HOME PARK OH6703912 185 Groundwater
BLACKBROOK VALLEY ESTATES OH6700412 180 Groundwater
BRIARWOOD ESTATES MHP OH7000112 127 Groundwater
LINCOLN SQUARE APARTMENTS OH7606612 125 Groundwater
BEECHWOOD ISLAND ESTATES OH6700212 122 Groundwater
MEADOW CREEK CONDO ASSOC OH6705512 122 Groundwater
GREEN ACRES MHP OH0300512 80 Groundwater
SHADY KNOLL MHP OH7605012 32 Groundwater

05Pressure on Kent's watershed

Outside forces that shape what reaches the treatment plant. None of these is a verdict on the tap by itself — but each adds pressure worth knowing about.

Industrial discharge

Present — monitored

5 facilities within 10 miles reported 285 lb released to surface water in the latest EPA Toxics Release Inventory. Proximity doesn't equal tap contamination — treatment and hydrology decide — but it's pressure on the watershed.

STRUKTOL CO OF AMERICA LLC — zinc compounds 255 lb · 7.7 mi
THE GOODYEAR TIRE & RUBBER CO — zinc compounds 30 lb · 8.6 mi
BERRY GLOBAL INC. 0 lb · 9.1 mi
+ 2 more facilities

Flood & storm history

Occasional

1 federal disaster declaration on record for Portage County. Flooding and severe storms can overwhelm treatment plants, cause sewage overflows, and push runoff into supplies.

HURRICANE KATRINA EVACUATION Sep 2005 · DR-3250

06How Kent compares

Scores for nearby Ohio cities on one line, with the average marked.

Cleveland
85.5 · A-
Toledo
78 · B
Kettering
64.6 · C
Kent (this city)
38.2 · F
Cincinnati
36.8 · F
Columbus
35.5 · F

dashed line = Ohio average (62/100)

Kent scores 38.2/100below the Ohio average of 62/100. It outscores 3 of 10 nearby cities. Full Ohio rankings →

Summit water quality rankings
Compare all cities in the county — grades, violations, and contaminant data side by side.

07What to do at home

Steps matched to what testing actually found in Kent's water — not generic advice.

Because of pfas

Filter drinking & cooking water

Reverse osmosis system. PFAS compounds exceed EPA maximum contaminant levels

Compare tested filters →
Know your report

Read your utility's annual report

Every utility must publish a yearly Consumer Confidence Report with its own testing results. It pairs well with the independent data on this page.

How to read a CCR →
Stay informed

Watch for Kent alerts

We refresh EPA data monthly and surface new violations, advisories, and boil-water notices for your county on this page.

All water alerts →

Frequently asked questions

Is Kent, OH tap water safe to drink?

Kent's water quality earned a grade of F (38.2/100). Significant issues have been found. A water filter is strongly recommended. The city ranks #504 out of 511 cities tested in Ohio.

What contaminants are in Kent's water?

Lead was measured at 0.0 ppb (90th percentile). 2 PFAS compounds were detected. 488 violations are on record.

How is Kent's water quality grade calculated?

The grade is based on four factors: violation history (40%), lead and copper levels (25%), PFAS contamination (25%), and regulatory compliance (10%). The score is also adjusted based on how complete the available data is. See our methodology page for full details.

Do I need a water filter in Kent?

PFAS compounds exceed EPA limits — a reverse osmosis or activated carbon filter is recommended.

Where does Kent's water come from?

Kent's water is sourced from Surface water. The city has 10 water systems serving approximately 310,635 residents.

What health violations has Kent's water system had?

Kent has 36 health-based violations on record. The most recent violation was recorded in December 2025. Health-based violations mean the water exceeded EPA maximum contaminant levels (MCLs) for a regulated substance. 51 violations remain unresolved.

How does Kent's water compare to other cities?

Kent ranks #504 out of 511 cities in Ohio (better than 1% of state cities) and #15011 out of 15382 cities nationally (2th percentile). The grade of F reflects the combined assessment of violation history, lead and copper levels, PFAS contamination, and regulatory compliance.

Share this reportHelp others learn about their water quality
WhatsAppXFacebookLinkedInEmail
About Kent, OH: Kent is a city in the U.S. state of Ohio and the largest city in Portage County. It is located along the Cuyahoga River in Northeast Ohio on the western edge of the county. The population was 28,215 at the 2020 census. The city is counted as part of the Akron metropolitan area and the larger Cleveland–Akron–Canton combined statistical area. Median household income $37,505 · median home value $192,671 · median age 23.8 · 42.7% homeowners · 44.5% college educated. Wikipedia → Service area: 3 ZIP codes across Summit.
Show ZIP codes 442404424244243
Sources: EPA SDWIS & ECHO · UCMR 3–5 · Lead & Copper Rule samples · EPA TRI · U.S. Drought Monitor · FEMA declarations. Data last updated Jul 2026. Analysis by the WaterVerge Editorial Team · methodology.