01The verdict: is Maxton water safe?
Maxton's drinking water has significant quality concerns based on EPA testing data. With a grade of C (60.4/100), the system has issues across multiple categories. A water filter is recommended for all residents. The city's 2 water systems serve approximately 2,598 residents using groundwater (wells).
Copper is over its legal limit
Measured at 3.03 mg/L against the EPA Action Level of 1.3 mg/L. The ledger below shows how far over — and which filter removes it.
See the measurement ↓3K people, 2 systems
All figures on this page come from federal EPA compliance and testing data for the systems serving this city.
See the systems ↓Lead is approaching its limit
Measured at 13.0 ppb — 87% of the 15 ppb limit. Within the rules, but with less headroom than you'd want.
See the ledger ↓Maxton's drinking water received a grade of C (60.4 out of 100), indicating fair water quality. The city's 2 water systems serve approximately 2,598 residents using groundwater.
Lead levels were measured at 13.0 ppb (90th percentile), which is within EPA limits but above recommended levels. UCMR 5 testing detected 11 PFAS compounds, with levels exceeding EPA maximum contaminant levels in the water supply. The system has 32 violations on record, including 12 health-based violations. 6 remain unresolved.
Maxton ranks #281 out of 400 cities in North Carolina for water quality, placing it below average in the state. Maxton relies on groundwater, which is generally less vulnerable to surface contamination but can be affected by naturally occurring minerals like arsenic and nitrate, as well as agricultural and industrial runoff. Of particular concern: PFAS "forever chemical" levels exceed the 2024 EPA maximum contaminant levels. These synthetic compounds don't break down naturally and require specialized filtration such as reverse osmosis or granular activated carbon. Hexavalent chromium (chromium-6) was detected at 0.07 µg/L in UCMR 3 testing. While below California's 10 µg/L limit and with no federal MCL set, residents sensitive to this contaminant may consider reverse osmosis filtration. While lead levels are within EPA limits, they are above the recommended 5 ppb threshold that health organizations consider ideal. A point-of-use filter adds an extra layer of protection. As a small community water system, Maxton may have fewer resources for advanced treatment technologies and infrastructure upgrades compared to larger utilities. The system has seen 7 violations in the past five years, suggesting a pattern of compliance challenges that residents should monitor closely.
02What's in Maxton's water
Every contaminant flagged in Maxton, on one shared scale: distance to its own legal limit. The red line is the limit — anything past it is out of compliance, and the closer a bar gets, the less headroom the system has.
Over Limit — EPA Action Level: 1.3 mg/L
Exceeds the EPA action level. Copper leaches from household plumbing — flush taps for 30 seconds before drinking, and consider a certified filter.Full contaminants report
| Contaminant | Detected Level | EPA Limit | Unit | Category | Status |
|---|---|---|---|---|---|
| Lead (90th percentile) LeadHeavy Metal A toxic heavy metal that can leach into drinking water from older pipes, solder, and fixtures. No amount of lead in water is considered safe. Health EffectsBrain and nervous system damage in children, kidney damage, high blood pressure, and reproductive problems in adults. EPA Limit15 ppb action level Common SourcesCorrosion of lead pipes, lead solder, brass faucets, and household plumbing. | 13.0 | 15 | ppb | Inorganic | Near Limit |
| Copper (90th percentile) CopperInorganic A metal that enters drinking water mainly through corrosion of copper plumbing. Small amounts are essential for health, but excess levels are harmful. Health EffectsGastrointestinal distress (nausea, vomiting, diarrhea) at short-term high levels; liver and kidney damage from long-term exposure. EPA Limit1.3 mg/L action level Common SourcesCorrosion of copper household plumbing, erosion of natural deposits. | 3.03 | 1.3 | mg/L | Inorganic | Over Limit |
| 11Cl-PF3OUdS | ND | HI | µg/L | PFAS | Not Detected |
| 4:2 FTS | ND | HI | µg/L | PFAS | Not Detected |
| 6:2 FTS 6:2 FTSPFAS A fluorotelomer sulfonate commonly found at sites contaminated with aqueous film-forming foam (AFFF) used in firefighting. Health EffectsPotential liver toxicity and endocrine disruption. Less studied but identified as a contaminant of concern. EPA LimitNo individual MCL (not yet regulated) Common SourcesFirefighting foam (AFFF), airports, military bases, and industrial facilities. | ND | HI | µg/L | PFAS | Not Detected |
| 8:2 FTS | ND | HI | µg/L | PFAS | Not Detected |
| 9Cl-PF3ONS | ND | HI | µg/L | PFAS | Not Detected |
| ADONA | ND | HI | µg/L | PFAS | Not Detected |
| HFPO-DA HFPO-DA (GenX)PFAS A replacement for PFOA in manufacturing, marketed as safer but still a persistent "forever chemical." Also known as GenX. Health EffectsLiver and kidney effects, reproductive toxicity, immune system effects, and potential cancer risk. EPA Limit10 ppt MCL Common SourcesFluoropolymer manufacturing (used as PFOA replacement), industrial wastewater discharge. | 0.034 | 0.01 | µg/L | PFAS | Over MCL |
| lithium LithiumInorganic A naturally occurring alkali metal found in groundwater. Monitored under UCMR 5 to assess occurrence in drinking water. Health EffectsKidney effects at high doses. Low-level exposure effects under study; some research suggests neurological effects. EPA LimitNo MCL (monitoring only under UCMR 5) Common SourcesNatural mineral deposits, geothermal water, and industrial discharge. | 12.000 | HI | µg/L | PFAS | Detected |
| NEtFOSAA | ND | HI | µg/L | PFAS | Not Detected |
| NFDHA | ND | HI | µg/L | PFAS | Not Detected |
| NMeFOSAA | ND | HI | µg/L | PFAS | Not Detected |
| PFBA PFBAPFAS One of the shortest-chain PFAS compounds. Very mobile in water and difficult to remove with standard filtration. Health EffectsThyroid effects, potential developmental toxicity. Shorter half-life in body than long-chain PFAS. EPA LimitNo individual MCL (not yet regulated) Common SourcesDegradation of longer-chain PFAS, industrial discharge, and firefighting foam. | 0.011 | HI | µg/L | PFAS | Detected |
| PFBS PFBSPFAS A short-chain PFAS used as a replacement for PFOS. While it clears the body faster than long-chain PFAS, it still persists in the environment. Health EffectsThyroid effects, reproductive and developmental toxicity, kidney effects. EPA LimitPart of Hazard Index (1.0) Common SourcesIndustrial discharge, firefighting foam, and as a replacement chemical in manufacturing. | 0.009 | HI | µg/L | PFAS | Detected |
| PFDA | ND | HI | µg/L | PFAS | Not Detected |
| PFDoA | ND | HI | µg/L | PFAS | Not Detected |
| PFEESA | ND | HI | µg/L | PFAS | Not Detected |
| PFHpA PFHpAPFAS A medium-chain PFAS compound found in various environmental samples. Less studied than PFOA/PFOS but still considered a contaminant of concern. Health EffectsLiver effects, potential developmental toxicity, and endocrine disruption. EPA LimitPart of Hazard Index (1.0) Common SourcesDegradation of longer-chain PFAS, industrial discharge, and contaminated water sources. | 0.016 | HI | µg/L | PFAS | Detected |
| PFHpS | ND | HI | µg/L | PFAS | Not Detected |
| PFHxA PFHxAPFAS A short-chain PFAS replacement chemical widely used after manufacturers phased out longer-chain PFAS. Very commonly detected in water. Health EffectsLiver and kidney effects, potential thyroid disruption. Considered less toxic than long-chain PFAS but still persistent. EPA LimitNo individual MCL (not yet regulated) Common SourcesIndustrial processes, firefighting foam (AFFF), food packaging, and textile treatment. | 0.025 | HI | µg/L | PFAS | Detected |
| PFHxS PFHxSPFAS A medium-chain PFAS found in firefighting foam and consumer products. It has a long half-life in the human body, similar to long-chain PFAS. Health EffectsImmune system effects, thyroid disruption, and potential reproductive and developmental harm. EPA LimitPart of Hazard Index (1.0) Common SourcesFirefighting foam (AFFF), waterproof textiles, food packaging, and industrial discharge. | 0.008 | HI | µg/L | PFAS | Detected |
| PFMBA | ND | HI | µg/L | PFAS | Not Detected |
| PFMPA | ND | HI | µg/L | PFAS | Not Detected |
| PFNA PFNAPFAS A long-chain PFAS compound used in manufacturing fluoropolymers. It bioaccumulates in the body and is very persistent in the environment. Health EffectsDevelopmental effects, liver toxicity, immune suppression, and potential cancer risk. EPA LimitPart of Hazard Index (1.0) Common SourcesFluoropolymer manufacturing, industrial emissions, and contaminated water sources. | ND | HI | µg/L | PFAS | Not Detected |
| PFOA PFOAPFAS A long-chain PFAS ("forever chemical") once widely used in nonstick coatings and firefighting foam. It persists in the body and environment for years. Health EffectsLinked to kidney and testicular cancer, thyroid disease, elevated cholesterol, and reproductive issues. EPA Limit4.0 ppt MCL Common SourcesIndustrial discharge, firefighting foam (AFFF), nonstick cookware manufacturing, and contaminated groundwater. | 0.030 | 0.004 | µg/L | PFAS | Over MCL |
| PFOS PFOSPFAS A long-chain PFAS compound historically used in stain-resistant coatings and firefighting foam. One of the most studied and persistent PFAS chemicals. Health EffectsLiver damage, immune system suppression, thyroid disruption, increased cholesterol, and potential cancer risk. EPA Limit4.0 ppt MCL Common SourcesFirefighting foam (AFFF), industrial sites, stain-resistant fabric treatments, and contaminated groundwater. | 0.006 | 0.004 | µg/L | PFAS | Over MCL |
| PFPeA PFPeAPFAS A short-chain PFAS compound commonly detected in drinking water. One of the most frequently found PFAS in UCMR 5 monitoring. Health EffectsLess studied than PFOA/PFOS. Potential liver and thyroid effects. Research is ongoing. EPA LimitNo individual MCL (not yet regulated) Common SourcesIndustrial discharge, firefighting foam degradation, and consumer products. | 0.029 | HI | µg/L | PFAS | Detected |
| PFPeS | 0.005 | HI | µg/L | PFAS | Detected |
| PFTA | ND | HI | µg/L | PFAS | Not Detected |
| PFTrDA | ND | HI | µg/L | PFAS | Not Detected |
| PFUnA | ND | HI | µg/L | PFAS | Not Detected |
Cities ranked by 90th-percentile lead PF PFAS in North Carolina
Cities ranked by compounds detected Cu Copper in North Carolina
Cities ranked by 90th-percentile copper
03Maxton's ten-year track record
Each box is one year. A green check means no EPA violations; a numbered badge counts that year's violations — red if any were health-based, amber if they were monitoring or paperwork issues. The system has 32 violations on record, including 12 health-based violations. 6 remain unresolved.
5 of the last ten years were clean. The numbered years had EPA violations — red when any were health-based, amber when they were paperwork or missed-testing issues.
▼ Down 5 ppb since 1992. Latest reading: 0 ppb (2025) — 0% of the action level. Sampled at higher-risk homes (90th percentile).
3.0mg/L(2025)
One sampling round on record — 233% of the 1.3mg/L EPA action level. Sampled at higher-risk homes (90th percentile).
04Where Maxton's water comes from
Maxton's drinking water is drawn from underground aquifers through wells.
Groundwater
Underground aquifers reached by wells — naturally filtered, but can carry minerals like arsenic and nitrate.
Local treatment
Groundwater generally needs less treatment — typically disinfection and, where needed, mineral removal.
2 systems
2 water systems, operated under local government ownership.
2,598 people
Residents served across Maxton's service area.
Groundwater is naturally filtered through rock and soil layers, generally requiring less treatment than surface water. However, it can contain naturally occurring contaminants like arsenic, radon, and minerals. Agricultural activity, septic systems, and industrial operations near well fields can introduce nitrates, pesticides, and volatile organic compounds. The system is operated by local government ownership and serves approximately 2,598 people through 2 water systems.
| System name | PWSID | Population | Source |
|---|---|---|---|
| ROBESON COUNTY WATER SYSTEM | NC0378055 | 65,303 | Groundwater |
| MAXTON, TOWN OF | NC0378035 | 2,598 | Groundwater |
Water bodies near Maxton
These water bodies shape the regional watershed and can indirectly affect groundwater quality.
05Pressure on Maxton's watershed
Outside forces that shape what reaches the treatment plant. None of these is a verdict on the tap by itself — but each adds pressure worth knowing about.
Industrial discharge
5 facilities within 10 miles reported 25 lb released to surface water in the latest EPA Toxics Release Inventory. Proximity doesn't equal tap contamination — treatment and hydrology decide — but it's pressure on the watershed.
Flood & storm history
10 federal disaster declarations on record for Robeson County. Flooding and severe storms can overwhelm treatment plants, cause sewage overflows, and push runoff into supplies.
Drought
Robeson County is in D3 (extreme drought) per the U.S. Drought Monitor (week of Jul 2026). Drought can raise disinfection-byproduct levels and taste/odor issues as utilities draw from lower reservoirs.
06How Maxton compares
Scores for nearby North Carolina cities on one line, with the average marked.
dashed line = North Carolina average (43/100)
Maxton scores 60.4/100 — above the North Carolina average of 43/100. It outscores 8 of 10 nearby cities. Full North Carolina rankings →
36.5 / 100FRaleigh, NC
30.7 / 100AClemmons, NC
86 / 100FDurham, NC
36.6 / 100FGreensboro, NC
33.5 / 100FCary, NC
34.6 / 100
Compare all cities in the county — grades, violations, and contaminant data side by side.→
07What to do at home
Steps matched to what testing actually found in Maxton's water — not generic advice.
Filter drinking & cooking water
Reverse osmosis system. Lead detected at 13.0 ppb
Compare tested filters →Flush taps & check your service line
Lead leaches from pipes as water sits. Run cold water 30 seconds before drinking (especially mornings), and ask the utility whether your address still has a lead service line.
Lead risks explained →Watch for Maxton alerts
This area has a history of flood declarations — after severe weather, watch for boil-water advisories from the utility, and check the live alerts on this page.
All water alerts →Frequently asked questions
Is Maxton, NC tap water safe to drink?
Maxton's water quality earned a grade of C (60.4/100). Some concerns have been identified. Consider a water filter for an extra layer of protection. The city ranks #281 out of 400 cities tested in North Carolina.
What contaminants are in Maxton's water?
Lead was measured at 13.0 ppb (90th percentile). 11 PFAS compounds were detected. 32 violations are on record.
How is Maxton's water quality grade calculated?
The grade is based on four factors: violation history (40%), lead and copper levels (25%), PFAS contamination (25%), and regulatory compliance (10%). The score is also adjusted based on how complete the available data is. See our methodology page for full details.
Do I need a water filter in Maxton?
While lead levels are within EPA limits, a filter adds extra protection. PFAS compounds exceed EPA limits — a reverse osmosis or activated carbon filter is recommended.
Where does Maxton's water come from?
Maxton's water is sourced from Groundwater. The city has 2 water systems serving approximately 2,598 residents.
What health violations has Maxton's water system had?
Maxton has 12 health-based violations on record. The most recent violation was recorded in July 2024. Health-based violations mean the water exceeded EPA maximum contaminant levels (MCLs) for a regulated substance. 6 violations remain unresolved.
Is Maxton's groundwater at risk of contamination?
Maxton uses groundwater, which can be affected by naturally occurring contaminants like arsenic, radon, and nitrate, as well as agricultural runoff and industrial activity. The system has 32 violations on record that may relate to groundwater quality. Groundwater systems are generally less susceptible to surface contamination but should be monitored for emerging contaminants like PFAS.
Why does Maxton have so many PFAS compounds in its water?
11 different PFAS "forever chemical" compounds were detected in Maxton's water supply during UCMR 5 testing. PFAS contamination often originates from proximity to military installations (AFFF firefighting foam), airports, industrial manufacturing sites, or wastewater treatment facilities. Some levels exceed the 2024 EPA maximum contaminant levels — a reverse osmosis or NSF-certified activated carbon filter is strongly recommended.
How does Maxton's water compare to other cities?
Maxton ranks #281 out of 400 cities in North Carolina (better than 30% of state cities) and #11891 out of 15382 cities nationally (23th percentile). The grade of C reflects the combined assessment of violation history, lead and copper levels, PFAS contamination, and regulatory compliance.