Skip to main content
WaterVerge

Water quality report · updated Jul 2026

Is Lindsay, CA Tap Water Safe to Drink?

Graded F — but PFOS, Strontium and 3 more were detected above EPA limits. Here's what's in the water and how to remove it. What to do ↓

5 contaminants over a legal limit
0.0 ppb lead, 90th percentile · low
12 unresolved violations
1K people served by 3 water systems

PWSID CA5410007 · high data confidence · local government utility

Reviewed by WaterVerge Editorial Team · Last updated July 2026
F 42.9 / 100

#657 of 690California cities
How we grade →

01The verdict: is Lindsay water safe?

Lindsay's drinking water has significant quality concerns based on EPA testing data. With a grade of F (42.9/100), the system has issues across multiple categories. A water filter is recommended for all residents. The city's 3 water systems serve approximately 1,000 residents using surface water (rivers, lakes, or reservoirs).

The concern

PFOS is over its legal limit

Measured at 0.0110 µg/L against the EPA MCL of 0.004 µg/L. The ledger below shows how far over — and which filter removes it.

See the measurement ↓
The good news

Lead is well under the limit

90th-percentile lead is 0.0 ppb — beneath the 15 ppb federal action level and under the 5 ppb watch threshold.

See the trend ↓
Keep watching

HAA5 is approaching its limit

Measured at 40.8 µg/L — 68% of the 60 µg/L limit. Within the rules, but with less headroom than you'd want.

See the ledger ↓

Lindsay's drinking water received a grade of F (42.9 out of 100), indicating failing water quality. The city's 3 water systems serve approximately 1,000 residents using surface water.

Lead levels were measured at 0.0 ppb (90th percentile), well within EPA limits. UCMR 5 testing detected 4 PFAS compounds, with levels exceeding EPA maximum contaminant levels in the water supply. The system has 262 violations on record, including 240 health-based violations. 12 remain unresolved.

Lindsay ranks #657 out of 690 cities in California for water quality, placing it among the lowest-rated in the state. The city draws from surface water sources, which are more susceptible to seasonal runoff and agricultural contamination, requiring extensive multi-barrier treatment including coagulation, filtration, and disinfection. Of particular concern: PFAS "forever chemical" levels exceed the 2024 EPA maximum contaminant levels. These synthetic compounds don't break down naturally and require specialized filtration such as reverse osmosis or granular activated carbon. Haloacetic acid (HAA5) levels were elevated at 40.8 µg/L in UCMR 4 testing, though below the 60 µg/L EPA limit. Activated carbon filtration can help reduce these disinfection byproducts. Hexavalent chromium (chromium-6) was detected at 5.20 µg/L in UCMR 3 testing. While below California's 10 µg/L limit and with no federal MCL set, residents sensitive to this contaminant may consider reverse osmosis filtration. As a small community water system, Lindsay may have fewer resources for advanced treatment technologies and infrastructure upgrades compared to larger utilities. The system has seen 44 violations in the past five years, suggesting a pattern of compliance challenges that residents should monitor closely.

How the 42.9/100 breaks down Methodology →
ViolationsHistorical violation record including health-based and monitoring violations.
0 / 45F
Lead & CopperLead at 0.0 ppb (90th percentile).
20 / 20A
Contaminants4 PFAS compounds detected.
8.9 / 20F
ComplianceMonitoring and reporting compliance with EPA regulations.
10 / 10A
Source RiskWater source: Surface water.
4 / 5B

02What's in Lindsay's water

Every contaminant flagged in Lindsay, on one shared scale: distance to its own legal limit. The red line is the limit — anything past it is out of compliance, and the closer a bar gets, the less headroom the system has.

10 detections · sorted by % of legal limit
Over the limit Elevated — watch Within limits
0 50% LEGAL LIMIT 150%

Over MCL — EPA MCL: 0.004 µg/L

PFAS "forever chemicals" exceed the 2024 EPA maximum contaminant levels, which utilities must meet by 2029. These compounds don't break down in the body or the environment. Reverse osmosis (NSF/ANSI 58) or certified granular activated carbon (NSF/ANSI 53) removes them at the tap.
Exceeds MCL What to do →
Strontium Inorganic
1800.0 µg/L 120% of limit
1,4-Dioxane Organic
1.80 µg/L 120% of limit
Vanadium Inorganic
40.00 µg/L 120% of limit
Chlorate Disinfection Byproduct
310.0 µg/L 120% of limit
Manganese Inorganic
6.5 µg/L 13% of limit
Molybdenum Inorganic
5.00 µg/L 13% of limit
39 contaminants tested under EPA SDWIS, LCR and UCMR programs · 13 detected · 2 PFAS over EPA MCL · PFAS hazard index 4.83 (above the 1.0 threshold) Contaminants without a federal MCL are shown against the strictest state or advisory level named in each row.

Full contaminants report

Contaminant Detected Level EPA Limit Unit Category Status
Lead (90th percentile) 0.0 15 ppb Inorganic Safe
11Cl-PF3OUdS ND HI µg/L PFAS Not Detected
4:2 FTS ND HI µg/L PFAS Not Detected
6:2 FTS ND HI µg/L PFAS Not Detected
8:2 FTS ND HI µg/L PFAS Not Detected
9Cl-PF3ONS ND HI µg/L PFAS Not Detected
ADONA ND HI µg/L PFAS Not Detected
HFPO-DA ND 0.01 µg/L PFAS Not Detected
lithium ND HI µg/L PFAS Not Detected
NEtFOSAA ND HI µg/L PFAS Not Detected
NFDHA ND HI µg/L PFAS Not Detected
NMeFOSAA ND HI µg/L PFAS Not Detected
PFBA ND HI µg/L PFAS Not Detected
PFBS 0.003 HI µg/L PFAS Detected
PFDA ND HI µg/L PFAS Not Detected
PFDoA ND HI µg/L PFAS Not Detected
PFEESA ND HI µg/L PFAS Not Detected
PFHpA ND HI µg/L PFAS Not Detected
PFHpS ND HI µg/L PFAS Not Detected
PFHxA ND HI µg/L PFAS Not Detected
PFHxS ND HI µg/L PFAS Not Detected
PFMBA ND HI µg/L PFAS Not Detected
PFMPA ND HI µg/L PFAS Not Detected
PFNA ND HI µg/L PFAS Not Detected
PFOA 0.008 0.004 µg/L PFAS Over MCL
PFOS 0.011 0.004 µg/L PFAS Over MCL
PFPeA 0.003 HI µg/L PFAS Detected
PFPeS ND HI µg/L PFAS Not Detected
PFTA ND HI µg/L PFAS Not Detected
PFTrDA ND HI µg/L PFAS Not Detected
PFUnA ND HI µg/L PFAS Not Detected
Data source: EPA SDWIS, UCMR 5, local utility CCR.

03Lindsay's ten-year track record

Each box is one year. A green check means no EPA violations; a numbered badge counts that year's violations — red if any were health-based, amber if they were monitoring or paperwork issues. The system has 262 violations on record, including 240 health-based violations. 12 remain unresolved.

1 of the last ten years was clean. The numbered years had EPA violations — red when any were health-based, amber when they were paperwork or missed-testing issues.

132 health-based in 10 yrs 6 monitoring & paperwork 6 still unresolved
PFAS4 PFAS "forever chemical" compounds detectedPFAS levels exceed EPA maximum contaminant levels. Reverse osmosis or activated carbon filtration recommended.
UpdateWater quality data updatedLatest EPA compliance and testing data incorporated into Lindsay's water quality assessment. Grade: F (42.9/100).
Violation2 drinking water violations recorded2 health-based. Contaminants: TTHM.Resolved
Violation4 drinking water violations recorded4 health-based. Contaminants: TTHM, Total Haloacetic Acids (HAA5), Nitrate.Resolved
Violation3 drinking water violations recorded3 health-based. Contaminants: Total Haloacetic Acids (HAA5), TTHM.Resolved
Lead, 90th percentileppb · lower is better
05101520EPA action level · 15 ppb1992 — 6 ppb1993 — 8 ppb1994 — 2.5 ppb1995 — 8 ppb1996 — 0 ppb1998 — 5 ppb1999 — 0 ppb2001 — 5 ppb2002 — 2.5 ppb2003 — 5 ppb2004 — 2.5 ppb2005 — 5 ppb2006 — 1.3 ppb2009 — 0 ppb2012 — 8 ppb2015 — 0 ppb2018 — 3 ppb2021 — 4 ppb2022 — 0 ppb2023 — 0 ppb2024 — 0 ppb2025 — 0 ppb60199219982004201520242025

Down 6 ppb since 1992. Latest reading: 0 ppb (2025) — 0% of the action level. Sampled at higher-risk homes (90th percentile).

04Where Lindsay's water comes from

Lindsay's drinking water comes primarily from surface water sources such as rivers, lakes, or reservoirs.

Source

Surface Water

Rivers, lakes, or reservoirs — more exposed to runoff, agriculture, and seasonal swings than groundwater.

Treatment

Local treatment

Multi-barrier treatment: coagulation, sedimentation, filtration, and disinfection to meet EPA standards.

Distribution

3 systems

3 water systems, operated under local government ownership.

Delivery

1,000 people

Residents served across Lindsay's service area.

Surface water systems require multi-stage treatment including coagulation, sedimentation, filtration, and disinfection to meet EPA Safe Drinking Water Act standards. These sources can be impacted by seasonal changes, stormwater runoff, upstream agriculture, and industrial discharge. The system is operated by local government ownership and serves approximately 1,000 people through 3 water systems.

System namePWSIDPopulationSource
LINDSAY, CITY OF CA5410006 12,659 Surface Water
LSID - TONYVILLE CA5410007 500 Surface Water
LSID-STRATHMORE SYSTEM CA5410036 500 Purchased Surface Water

05Pressure on Lindsay's watershed

Outside forces that shape what reaches the treatment plant. None of these is a verdict on the tap by itself — but each adds pressure worth knowing about.

Industrial discharge

Present — monitored

1 facility within 10 miles reported 0 lb released to surface water in the latest EPA Toxics Release Inventory. Proximity doesn't equal tap contamination — treatment and hydrology decide — but it's pressure on the watershed.

MCWANE PLANT & INDUSTRIAL 0 lb · 3.2 mi

06How Lindsay compares

Scores for nearby California cities on one line, with the average marked.

Oakland
77.9 · B
Lindsay (this city)
42.9 · F
Los Angeles
42.8 · F
San Diego
39.7 · F
Sacramento
31.2 · F
San Jose
28 · F

dashed line = California average (57/100)

Lindsay scores 42.9/100below the California average of 57/100. It outscores 5 of 10 nearby cities. Full California rankings →

Tulare water quality rankings
Compare all cities in the county — grades, violations, and contaminant data side by side.

07What to do at home

Steps matched to what testing actually found in Lindsay's water — not generic advice.

Because of pfas

Filter drinking & cooking water

Reverse osmosis system. PFAS compounds exceed EPA maximum contaminant levels

Compare tested filters →
Know your report

Read your utility's annual report

Every utility must publish a yearly Consumer Confidence Report with its own testing results. It pairs well with the independent data on this page.

How to read a CCR →
Stay informed

Watch for Lindsay alerts

We refresh EPA data monthly and surface new violations, advisories, and boil-water notices for your county on this page.

All water alerts →

Frequently asked questions

Is Lindsay, CA tap water safe to drink?

Lindsay's water quality earned a grade of F (42.9/100). Significant issues have been found. A water filter is strongly recommended. The city ranks #657 out of 690 cities tested in California.

What contaminants are in Lindsay's water?

Lead was measured at 0.0 ppb (90th percentile). 4 PFAS compounds were detected. 262 violations are on record.

How is Lindsay's water quality grade calculated?

The grade is based on four factors: violation history (40%), lead and copper levels (25%), PFAS contamination (25%), and regulatory compliance (10%). The score is also adjusted based on how complete the available data is. See our methodology page for full details.

Do I need a water filter in Lindsay?

PFAS compounds exceed EPA limits — a reverse osmosis or activated carbon filter is recommended.

Where does Lindsay's water come from?

Lindsay's water is sourced from Surface water. The city has 3 water systems serving approximately 1,000 residents.

What health violations has Lindsay's water system had?

Lindsay has 240 health-based violations on record. The most recent violation was recorded in October 2025. Health-based violations mean the water exceeded EPA maximum contaminant levels (MCLs) for a regulated substance. 12 violations remain unresolved.

Why does Lindsay have so many PFAS compounds in its water?

4 different PFAS "forever chemical" compounds were detected in Lindsay's water supply during UCMR 5 testing. PFAS contamination often originates from proximity to military installations (AFFF firefighting foam), airports, industrial manufacturing sites, or wastewater treatment facilities. Some levels exceed the 2024 EPA maximum contaminant levels — a reverse osmosis or NSF-certified activated carbon filter is strongly recommended.

How does Lindsay's water compare to other cities?

Lindsay ranks #657 out of 690 cities in California (better than 5% of state cities) and #14421 out of 15382 cities nationally (6th percentile). The grade of F reflects the combined assessment of violation history, lead and copper levels, PFAS contamination, and regulatory compliance.

Share this reportHelp others learn about their water quality
WhatsAppXFacebookLinkedInEmail
About Lindsay, CA: Median household income $44,816 · median home value $256,768 · median age 27.8 · 51.3% homeowners · 4.7% college educated. Service area: 1 ZIP code across Tulare.
Show ZIP codes 93247
Sources: EPA SDWIS & ECHO · UCMR 3–5 · Lead & Copper Rule samples · EPA TRI · U.S. Drought Monitor · FEMA declarations. Data last updated Jul 2026. Analysis by the WaterVerge Editorial Team · methodology.