01The verdict: is Kiln water safe?
Kiln's drinking water has significant quality concerns based on EPA testing data. With a grade of D (45.5/100), the system has issues across multiple categories. A water filter is recommended for all residents. The city's 3 water systems serve approximately 15,691 residents using groundwater (wells).
Copper is over its legal limit
Measured at 3.65 mg/L against the EPA Action Level of 1.3 mg/L. The ledger below shows how far over — and which filter removes it.
See the measurement ↓Monitoring is on schedule
The system is meeting its EPA monitoring and reporting requirements — testing is happening when it should.
See the score ↓lithium is approaching its limit
Measured at 9.3000 µg/L — 120% of the 0.004 µg/L limit. Within the rules, but with less headroom than you'd want.
See the ledger ↓Kiln's drinking water received a grade of D (45.5 out of 100), indicating poor water quality. The city's 3 water systems serve approximately 15,691 residents using purchased ground water.
Lead levels were measured at 6.3 ppb (90th percentile), which is within EPA limits but above recommended levels. UCMR 5 testing detected 1 PFAS compound in the water supply. The system has 500 violations on record, including 19 health-based violations. 15 remain unresolved.
Kiln ranks #314 out of 319 cities in Mississippi for water quality, placing it among the lowest-rated in the state. Kiln purchases its water from a regional wholesaler, meaning quality depends on both the supplier's treatment and the local distribution system's condition. PFAS compounds were detected in testing, though levels remain within current EPA limits. Residents seeking extra precaution may consider an activated carbon or reverse osmosis filter. While lead levels are within EPA limits, they are above the recommended 5 ppb threshold that health organizations consider ideal. A point-of-use filter adds an extra layer of protection. The system has seen 7 violations in the past five years, suggesting a pattern of compliance challenges that residents should monitor closely.
02What's in Kiln's water
Every contaminant flagged in Kiln, on one shared scale: distance to its own legal limit. The red line is the limit — anything past it is out of compliance, and the closer a bar gets, the less headroom the system has.
Over Limit — EPA Action Level: 1.3 mg/L
Exceeds the EPA action level. Copper leaches from household plumbing — flush taps for 30 seconds before drinking, and consider a certified filter.Full contaminants report
| Contaminant | Detected Level | EPA Limit | Unit | Category | Status |
|---|---|---|---|---|---|
| Lead (90th percentile) LeadHeavy Metal A toxic heavy metal that can leach into drinking water from older pipes, solder, and fixtures. No amount of lead in water is considered safe. Health EffectsBrain and nervous system damage in children, kidney damage, high blood pressure, and reproductive problems in adults. EPA Limit15 ppb action level Common SourcesCorrosion of lead pipes, lead solder, brass faucets, and household plumbing. | 6.3 | 15 | ppb | Inorganic | Safe |
| Copper (90th percentile) CopperInorganic A metal that enters drinking water mainly through corrosion of copper plumbing. Small amounts are essential for health, but excess levels are harmful. Health EffectsGastrointestinal distress (nausea, vomiting, diarrhea) at short-term high levels; liver and kidney damage from long-term exposure. EPA Limit1.3 mg/L action level Common SourcesCorrosion of copper household plumbing, erosion of natural deposits. | 3.65 | 1.3 | mg/L | Inorganic | Over Limit |
| 11Cl-PF3OUdS | ND | HI | µg/L | PFAS | Not Detected |
| 4:2 FTS | ND | HI | µg/L | PFAS | Not Detected |
| 6:2 FTS 6:2 FTSPFAS A fluorotelomer sulfonate commonly found at sites contaminated with aqueous film-forming foam (AFFF) used in firefighting. Health EffectsPotential liver toxicity and endocrine disruption. Less studied but identified as a contaminant of concern. EPA LimitNo individual MCL (not yet regulated) Common SourcesFirefighting foam (AFFF), airports, military bases, and industrial facilities. | ND | HI | µg/L | PFAS | Not Detected |
| 8:2 FTS | ND | HI | µg/L | PFAS | Not Detected |
| 9Cl-PF3ONS | ND | HI | µg/L | PFAS | Not Detected |
| ADONA | ND | HI | µg/L | PFAS | Not Detected |
| HFPO-DA HFPO-DA (GenX)PFAS A replacement for PFOA in manufacturing, marketed as safer but still a persistent "forever chemical." Also known as GenX. Health EffectsLiver and kidney effects, reproductive toxicity, immune system effects, and potential cancer risk. EPA Limit10 ppt MCL Common SourcesFluoropolymer manufacturing (used as PFOA replacement), industrial wastewater discharge. | ND | 0.01 | µg/L | PFAS | Not Detected |
| lithium LithiumInorganic A naturally occurring alkali metal found in groundwater. Monitored under UCMR 5 to assess occurrence in drinking water. Health EffectsKidney effects at high doses. Low-level exposure effects under study; some research suggests neurological effects. EPA LimitNo MCL (monitoring only under UCMR 5) Common SourcesNatural mineral deposits, geothermal water, and industrial discharge. | 9.300 | HI | µg/L | PFAS | Detected |
| NEtFOSAA | ND | HI | µg/L | PFAS | Not Detected |
| NFDHA | ND | HI | µg/L | PFAS | Not Detected |
| NMeFOSAA | ND | HI | µg/L | PFAS | Not Detected |
| PFBA PFBAPFAS One of the shortest-chain PFAS compounds. Very mobile in water and difficult to remove with standard filtration. Health EffectsThyroid effects, potential developmental toxicity. Shorter half-life in body than long-chain PFAS. EPA LimitNo individual MCL (not yet regulated) Common SourcesDegradation of longer-chain PFAS, industrial discharge, and firefighting foam. | ND | HI | µg/L | PFAS | Not Detected |
| PFBS PFBSPFAS A short-chain PFAS used as a replacement for PFOS. While it clears the body faster than long-chain PFAS, it still persists in the environment. Health EffectsThyroid effects, reproductive and developmental toxicity, kidney effects. EPA LimitPart of Hazard Index (1.0) Common SourcesIndustrial discharge, firefighting foam, and as a replacement chemical in manufacturing. | ND | HI | µg/L | PFAS | Not Detected |
| PFDA | ND | HI | µg/L | PFAS | Not Detected |
| PFDoA | ND | HI | µg/L | PFAS | Not Detected |
| PFEESA | ND | HI | µg/L | PFAS | Not Detected |
| PFHpA PFHpAPFAS A medium-chain PFAS compound found in various environmental samples. Less studied than PFOA/PFOS but still considered a contaminant of concern. Health EffectsLiver effects, potential developmental toxicity, and endocrine disruption. EPA LimitPart of Hazard Index (1.0) Common SourcesDegradation of longer-chain PFAS, industrial discharge, and contaminated water sources. | ND | HI | µg/L | PFAS | Not Detected |
| PFHpS | ND | HI | µg/L | PFAS | Not Detected |
| PFHxA PFHxAPFAS A short-chain PFAS replacement chemical widely used after manufacturers phased out longer-chain PFAS. Very commonly detected in water. Health EffectsLiver and kidney effects, potential thyroid disruption. Considered less toxic than long-chain PFAS but still persistent. EPA LimitNo individual MCL (not yet regulated) Common SourcesIndustrial processes, firefighting foam (AFFF), food packaging, and textile treatment. | ND | HI | µg/L | PFAS | Not Detected |
| PFHxS PFHxSPFAS A medium-chain PFAS found in firefighting foam and consumer products. It has a long half-life in the human body, similar to long-chain PFAS. Health EffectsImmune system effects, thyroid disruption, and potential reproductive and developmental harm. EPA LimitPart of Hazard Index (1.0) Common SourcesFirefighting foam (AFFF), waterproof textiles, food packaging, and industrial discharge. | ND | HI | µg/L | PFAS | Not Detected |
| PFMBA | ND | HI | µg/L | PFAS | Not Detected |
| PFMPA | ND | HI | µg/L | PFAS | Not Detected |
| PFNA PFNAPFAS A long-chain PFAS compound used in manufacturing fluoropolymers. It bioaccumulates in the body and is very persistent in the environment. Health EffectsDevelopmental effects, liver toxicity, immune suppression, and potential cancer risk. EPA LimitPart of Hazard Index (1.0) Common SourcesFluoropolymer manufacturing, industrial emissions, and contaminated water sources. | ND | HI | µg/L | PFAS | Not Detected |
| PFOA PFOAPFAS A long-chain PFAS ("forever chemical") once widely used in nonstick coatings and firefighting foam. It persists in the body and environment for years. Health EffectsLinked to kidney and testicular cancer, thyroid disease, elevated cholesterol, and reproductive issues. EPA Limit4.0 ppt MCL Common SourcesIndustrial discharge, firefighting foam (AFFF), nonstick cookware manufacturing, and contaminated groundwater. | ND | 0.004 | µg/L | PFAS | Not Detected |
| PFOS PFOSPFAS A long-chain PFAS compound historically used in stain-resistant coatings and firefighting foam. One of the most studied and persistent PFAS chemicals. Health EffectsLiver damage, immune system suppression, thyroid disruption, increased cholesterol, and potential cancer risk. EPA Limit4.0 ppt MCL Common SourcesFirefighting foam (AFFF), industrial sites, stain-resistant fabric treatments, and contaminated groundwater. | ND | 0.004 | µg/L | PFAS | Not Detected |
| PFPeA PFPeAPFAS A short-chain PFAS compound commonly detected in drinking water. One of the most frequently found PFAS in UCMR 5 monitoring. Health EffectsLess studied than PFOA/PFOS. Potential liver and thyroid effects. Research is ongoing. EPA LimitNo individual MCL (not yet regulated) Common SourcesIndustrial discharge, firefighting foam degradation, and consumer products. | ND | HI | µg/L | PFAS | Not Detected |
| PFPeS | ND | HI | µg/L | PFAS | Not Detected |
| PFTA | ND | HI | µg/L | PFAS | Not Detected |
| PFTrDA | ND | HI | µg/L | PFAS | Not Detected |
| PFUnA | ND | HI | µg/L | PFAS | Not Detected |
Cities ranked by 90th-percentile lead PF PFAS in Mississippi
Cities ranked by compounds detected Cu Copper in Mississippi
Cities ranked by 90th-percentile copper
03Kiln's ten-year track record
Each box is one year. A green check means no EPA violations; a numbered badge counts that year's violations — red if any were health-based, amber if they were monitoring or paperwork issues. The system has 500 violations on record, including 19 health-based violations. 15 remain unresolved.
4 of the last ten years were clean. The numbered years had EPA violations — red when any were health-based, amber when they were paperwork or missed-testing issues.
▲ Up 1.3 ppb since 1993. Latest reading: 6.3 ppb (2025) — 42% of the action level. Sampled at higher-risk homes (90th percentile).
3.6mg/L(2010)
One sampling round on record — 281% of the 1.3mg/L EPA action level. Sampled at higher-risk homes (90th percentile).
04Where Kiln's water comes from
Kiln purchases its water supply from a regional wholesale provider rather than treating raw water directly.
Purchased Groundwater
Water is bought from a regional wholesaler; quality starts at the supplier's intake and treatment.
Wholesale supplier
Primary treatment happens at the wholesaler; the local utility maintains disinfectant residual in its pipes.
3 systems
3 water systems, operated under local government ownership.
15,691 people
Residents served across Kiln's service area.
Water quality depends on both the wholesaler's treatment standards and the condition of Kiln's local distribution pipes and storage facilities. Purchased water systems are common in suburban areas and smaller communities that lack the infrastructure for independent treatment. The system is operated by local government ownership and serves approximately 15,691 people through 3 water systems.
| System name | PWSID | Population | Source |
|---|---|---|---|
| KILN UTILITY AND FIRE DISTRICT OF HANCOC | MS0230050 | 7,051 | Purchased Groundwater |
| STANDARD DEDEAUX WATER ASSOCIATION | MS0230063 | 5,386 | Groundwater |
| HANCOCK COUNTY WATER & SEWER | MS0230065 | 3,254 | Purchased Groundwater |
Water bodies near Kiln
These water bodies shape the regional watershed and can indirectly affect groundwater quality.
05Pressure on Kiln's watershed
Outside forces that shape what reaches the treatment plant. None of these is a verdict on the tap by itself — but each adds pressure worth knowing about.
Industrial discharge
2 facilities within 10 miles reported 1k lb released to surface water in the latest EPA Toxics Release Inventory. Proximity doesn't equal tap contamination — treatment and hydrology decide — but it's pressure on the watershed.
Flood & storm history
10 federal disaster declarations on record for Hancock County. Flooding and severe storms can overwhelm treatment plants, cause sewage overflows, and push runoff into supplies.
06How Kiln compares
Scores for nearby Mississippi cities on one line, with the average marked.
dashed line = Mississippi average (54/100)
Kiln scores 45.5/100 — below the Mississippi average of 54/100. It outscores 1 of 10 nearby cities. Full Mississippi rankings →
47.8 / 100DHattiesburg, MS
48.8 / 100DGulfport, MS
52 / 100DCanton, MS
50 / 100FOxford, MS
40.5 / 100BOlive Branch, MS
73 / 100
Compare all cities in the county — grades, violations, and contaminant data side by side.→
07What to do at home
Steps matched to what testing actually found in Kiln's water — not generic advice.
Filter drinking & cooking water
Activated carbon or reverse osmosis filter. Lead detected at 6.3 ppb
Compare tested filters →Flush taps & check your service line
Lead leaches from pipes as water sits. Run cold water 30 seconds before drinking (especially mornings), and ask the utility whether your address still has a lead service line.
Lead risks explained →Watch for Kiln alerts
This area has a history of flood declarations — after severe weather, watch for boil-water advisories from the utility, and check the live alerts on this page.
All water alerts →Frequently asked questions
Is Kiln, MS tap water safe to drink?
Kiln's water quality earned a grade of D (45.5/100). Significant issues have been found. A water filter is strongly recommended. The city ranks #314 out of 319 cities tested in Mississippi.
What contaminants are in Kiln's water?
Lead was measured at 6.3 ppb (90th percentile). 1 PFAS compound was detected. 500 violations are on record.
How is Kiln's water quality grade calculated?
The grade is based on four factors: violation history (40%), lead and copper levels (25%), PFAS contamination (25%), and regulatory compliance (10%). The score is also adjusted based on how complete the available data is. See our methodology page for full details.
Do I need a water filter in Kiln?
While lead levels are within EPA limits, a filter adds extra protection. PFAS compounds have been detected. A filter with activated carbon can help reduce exposure.
Where does Kiln's water come from?
Kiln's water is sourced from Purchased ground water. The city has 3 water systems serving approximately 15,691 residents.
What health violations has Kiln's water system had?
Kiln has 19 health-based violations on record. The most recent violation was recorded in October 2024. Health-based violations mean the water exceeded EPA maximum contaminant levels (MCLs) for a regulated substance. 15 violations remain unresolved.
Is Kiln's groundwater at risk of contamination?
Kiln uses groundwater, which can be affected by naturally occurring contaminants like arsenic, radon, and nitrate, as well as agricultural runoff and industrial activity. The system has 500 violations on record that may relate to groundwater quality. Groundwater systems are generally less susceptible to surface contamination but should be monitored for emerging contaminants like PFAS.
How does Kiln's water compare to other cities?
Kiln ranks #314 out of 319 cities in Mississippi (better than 2% of state cities) and #13844 out of 15382 cities nationally (10th percentile). The grade of D reflects the combined assessment of violation history, lead and copper levels, PFAS contamination, and regulatory compliance.