Skip to main content
WaterVerge

Water quality report · updated Jul 2026

Is Danville City, VA Tap Water Safe to Drink?

Graded A- — but PFOA was detected above EPA limits. Here's what's in the water and how to remove it. What to do ↓

1 contaminant over a legal limit
0.0 ppb lead, 90th percentile · low
None unresolved violations
43K people served by 1 water system

PWSID VA5590100 · high data confidence · local government utility

Reviewed by WaterVerge Editorial Team · Last updated July 2026
A 88.5 / 100

#79 of 229Virginia cities
How we grade →

01The verdict: is Danville City water safe?

Danville City's tap water meets most EPA standards but has areas that warrant attention. With a grade of A- (88.5/100), some contaminant levels or compliance issues suggest that residents may benefit from additional filtration. The city's 1 water system serves approximately 43,055 residents using surface water (rivers, lakes, or reservoirs).

The concern

PFOA is over its legal limit

Measured at 0.0091 µg/L against the EPA MCL of 0.004 µg/L. The ledger below shows how far over — and which filter removes it.

See the measurement ↓
The good news

Lead is well under the limit

90th-percentile lead is 0.0 ppb — beneath the 15 ppb federal action level and under the 5 ppb watch threshold.

See the trend ↓
Keep watching

3 violations in the last five years

Recent compliance history is the best predictor of future problems — the year-by-year record is below.

See the record ↓

Danville City's drinking water received a grade of A- (88.5 out of 100), indicating good water quality. The city's 1 water system serves approximately 43,055 residents using surface water.

Lead levels were measured at 0.0 ppb (90th percentile), well within EPA limits. UCMR 5 testing detected 1 PFAS compound, with levels exceeding EPA maximum contaminant levels in the water supply. The system has 4 violations on record, including 4 health-based violations. All violations have been resolved.

Danville City ranks #79 out of 229 cities in Virginia for water quality, placing it mid-range in the state. The city draws from surface water sources, which are more susceptible to seasonal runoff and agricultural contamination, requiring extensive multi-barrier treatment including coagulation, filtration, and disinfection. Of particular concern: PFAS "forever chemical" levels exceed the 2024 EPA maximum contaminant levels. These synthetic compounds don't break down naturally and require specialized filtration such as reverse osmosis or granular activated carbon. Hexavalent chromium (chromium-6) was detected at 0.34 µg/L in UCMR 3 testing. While below California's 10 µg/L limit and with no federal MCL set, residents sensitive to this contaminant may consider reverse osmosis filtration.

How the 88.5/100 breaks down Methodology →
ViolationsHistorical violation record including health-based and monitoring violations.
38.7 / 45B
Lead & CopperLead at 0.0 ppb (90th percentile).
20 / 20A
Contaminants1 PFAS compound detected.
15.8 / 20B
ComplianceMonitoring and reporting compliance with EPA regulations.
10 / 10A
Source RiskWater source: Surface water.
4 / 5B

02What's in Danville City's water

Every contaminant flagged in Danville City, on one shared scale: distance to its own legal limit. The red line is the limit — anything past it is out of compliance, and the closer a bar gets, the less headroom the system has.

7 detections · sorted by % of legal limit
Over the limit Elevated — watch Within limits
0 50% LEGAL LIMIT 150%

Over MCL — EPA MCL: 0.004 µg/L

PFAS "forever chemicals" exceed the 2024 EPA maximum contaminant levels, which utilities must meet by 2029. These compounds don't break down in the body or the environment. Reverse osmosis (NSF/ANSI 58) or certified granular activated carbon (NSF/ANSI 53) removes them at the tap.
Exceeds MCL What to do →
Vanadium Inorganic
1.00 µg/L 5% of limit
Strontium Inorganic
63.0 µg/L 4% of limit
Manganese Inorganic
2.1 µg/L 4% of limit
36 contaminants tested under EPA SDWIS, LCR and UCMR programs · 7 detected · 1 PFAS over EPA MCL · PFAS hazard index 2.27 (above the 1.0 threshold) Contaminants without a federal MCL are shown against the strictest state or advisory level named in each row.

Full contaminants report

Contaminant Detected Level EPA Limit Unit Category Status
Lead (90th percentile) 0.0 15 ppb Inorganic Safe
11Cl-PF3OUdS ND HI µg/L PFAS Not Detected
4:2 FTS ND HI µg/L PFAS Not Detected
6:2 FTS ND HI µg/L PFAS Not Detected
8:2 FTS ND HI µg/L PFAS Not Detected
9Cl-PF3ONS ND HI µg/L PFAS Not Detected
ADONA ND HI µg/L PFAS Not Detected
HFPO-DA ND 0.01 µg/L PFAS Not Detected
lithium ND HI µg/L PFAS Not Detected
NEtFOSAA ND HI µg/L PFAS Not Detected
NFDHA ND HI µg/L PFAS Not Detected
NMeFOSAA ND HI µg/L PFAS Not Detected
PFBA ND HI µg/L PFAS Not Detected
PFBS ND HI µg/L PFAS Not Detected
PFDA ND HI µg/L PFAS Not Detected
PFDoA ND HI µg/L PFAS Not Detected
PFEESA ND HI µg/L PFAS Not Detected
PFHpA ND HI µg/L PFAS Not Detected
PFHpS ND HI µg/L PFAS Not Detected
PFHxA ND HI µg/L PFAS Not Detected
PFHxS ND HI µg/L PFAS Not Detected
PFMBA ND HI µg/L PFAS Not Detected
PFMPA ND HI µg/L PFAS Not Detected
PFNA ND HI µg/L PFAS Not Detected
PFOA 0.009 0.004 µg/L PFAS Over MCL
PFOS ND 0.004 µg/L PFAS Not Detected
PFPeA ND HI µg/L PFAS Not Detected
PFPeS ND HI µg/L PFAS Not Detected
PFTA ND HI µg/L PFAS Not Detected
PFTrDA ND HI µg/L PFAS Not Detected
PFUnA ND HI µg/L PFAS Not Detected
Data source: EPA SDWIS, UCMR 5, local utility CCR.

03Danville City's ten-year track record

Each box is one year. A green check means no EPA violations; a numbered badge counts that year's violations — red if any were health-based, amber if they were monitoring or paperwork issues. The system has 4 violations on record, including 4 health-based violations. All violations have been resolved.

7 of the last ten years were clean. The numbered years had EPA violations — red when any were health-based, amber when they were paperwork or missed-testing issues.

4 health-based in 10 yrs
PFAS1 PFAS "forever chemical" compound detectedPFAS levels exceed EPA maximum contaminant levels. Reverse osmosis or activated carbon filtration recommended.
UpdateWater quality data updatedLatest EPA compliance and testing data incorporated into Danville City's water quality assessment. Grade: A- (88.5/100).
Violation1 drinking water violation recorded1 health-based. Contaminants: TTHM.Resolved
Violation1 drinking water violation recorded1 health-based. Contaminants: TTHM.Resolved
Violation1 drinking water violation recorded1 health-based. Contaminants: TTHM.Resolved
Lead, 90th percentileppb · lower is better
05101520EPA action level · 15 ppb1992 — 8 ppb2003 — 5 ppb2006 — 3 ppb2009 — 4 ppb2012 — 2.4 ppb2014 — 1.2 ppb2018 — 1.7 ppb2021 — 0 ppb2024 — 0 ppb8019922006201220182024

Down 8 ppb since 1992. Latest reading: 0 ppb (2024) — 0% of the action level. Sampled at higher-risk homes (90th percentile).

04Where Danville City's water comes from

Danville City's drinking water comes primarily from surface water sources such as rivers, lakes, or reservoirs.

Source

Surface Water

Rivers, lakes, or reservoirs — more exposed to runoff, agriculture, and seasonal swings than groundwater.

Treatment

Local treatment

Multi-barrier treatment: coagulation, sedimentation, filtration, and disinfection to meet EPA standards.

Distribution

1 system

1 water system, operated under local government ownership.

Delivery

43,055 people

Residents served across Danville City's service area.

Surface water systems require multi-stage treatment including coagulation, sedimentation, filtration, and disinfection to meet EPA Safe Drinking Water Act standards. These sources can be impacted by seasonal changes, stormwater runoff, upstream agriculture, and industrial discharge. The system is operated by local government ownership and serves approximately 43,055 people through 1 water system.

System namePWSIDPopulationSource
DANVILLE, CITY OF VA5590100 43,055 Surface Water

Water bodies near Danville City

Sandy River · river Dan River · river

As a surface-water system, these water bodies may directly influence Danville City's drinking water supply.

05How Danville City compares

Scores for nearby Virginia cities on one line, with the average marked.

Danville City (this city)
88.5 · A-
Ashburn
87 · A-
Chesterfield
80.7 · B+
Herndon
75.5 · B

dashed line = Virginia average (85/100)

Danville City scores 88.5/100on par with the Virginia average of 85/100. It outscores 7 of 10 nearby cities. Full Virginia rankings →

06What to do at home

Steps matched to what testing actually found in Danville City's water — not generic advice.

Because of pfas

Filter drinking & cooking water

Reverse osmosis system. PFAS compounds exceed EPA maximum contaminant levels

Compare tested filters →
Know your report

Read your utility's annual report

Every utility must publish a yearly Consumer Confidence Report with its own testing results. It pairs well with the independent data on this page.

How to read a CCR →
Stay informed

Watch for Danville City alerts

We refresh EPA data monthly and surface new violations, advisories, and boil-water notices for your county on this page.

All water alerts →

Frequently asked questions

Is Danville City, VA tap water safe to drink?

Danville City's water quality earned a grade of A- (88.5/100). The water generally meets EPA standards and is considered safe for consumption. The city ranks #79 out of 229 cities tested in Virginia.

What contaminants are in Danville City's water?

Lead was measured at 0.0 ppb (90th percentile). 1 PFAS compound was detected. 4 violations are on record.

How is Danville City's water quality grade calculated?

The grade is based on four factors: violation history (40%), lead and copper levels (25%), PFAS contamination (25%), and regulatory compliance (10%). The score is also adjusted based on how complete the available data is. See our methodology page for full details.

Do I need a water filter in Danville City?

PFAS compounds exceed EPA limits — a reverse osmosis or activated carbon filter is recommended.

Where does Danville City's water come from?

Danville City's water is sourced from Surface water. The city has 1 water system serving approximately 43,055 residents.

What health violations has Danville City's water system had?

Danville City has 4 health-based violations on record. The most recent violation was recorded in April 2023. Health-based violations mean the water exceeded EPA maximum contaminant levels (MCLs) for a regulated substance. All health violations have been resolved.

How does Danville City's water compare to other cities?

Danville City ranks #79 out of 229 cities in Virginia (better than 66% of state cities) and #3365 out of 15382 cities nationally (78th percentile). The grade of A- reflects the combined assessment of violation history, lead and copper levels, PFAS contamination, and regulatory compliance.

Share this reportHelp others learn about their water quality
WhatsAppXFacebookLinkedInEmail
About Danville City, VA: Danville is an independent city in the Commonwealth of Virginia in the United States. The city is located in the Southside Virginia region and on the fall line of the Dan River. Median household income $41,484 · median home value $104,434 · median age 41 · 49.5% homeowners · 18.6% college educated. Wikipedia → Sources: EPA SDWIS & ECHO · UCMR 3–5 · Lead & Copper Rule samples · EPA TRI · U.S. Drought Monitor · FEMA declarations. Data last updated Jul 2026. Analysis by the WaterVerge Editorial Team · methodology.