Skip to main content
WaterVerge

Water quality report · updated Jul 2026

Is Bellflower, CA Tap Water Safe to Drink?

Graded B+ — but PFOS and 1,4-Dioxane were detected above EPA limits. Here's what's in the water and how to remove it. What to do ↓

2 contaminants over a legal limit
0.0 ppb lead, 90th percentile · low
3 unresolved violations
47K people served by 2 water systems

PWSID CA1910013 · high data confidence · private utility

Reviewed by WaterVerge Editorial Team · Last updated July 2026
B 81.9 / 100

#336 of 690California cities
How we grade →

01The verdict: is Bellflower water safe?

Bellflower's drinking water has significant quality concerns based on EPA testing data. With a grade of B+ (81.9/100), the system has issues across multiple categories. A water filter is recommended for all residents. The city's 2 water systems serve approximately 47,429 residents using surface water (rivers, lakes, or reservoirs).

The concern

PFOS is over its legal limit

Measured at 0.0170 µg/L against the EPA MCL of 0.004 µg/L. The ledger below shows how far over — and which filter removes it.

See the measurement ↓
The good news

Lead is well under the limit

90th-percentile lead is 0.0 ppb — beneath the 15 ppb federal action level and under the 5 ppb watch threshold.

See the trend ↓
Keep watching

Strontium is approaching its limit

Measured at 820.0 µg/L — 55% of the 1,500 µg/L limit. Within the rules, but with less headroom than you'd want.

See the ledger ↓

Bellflower's drinking water received a grade of B+ (81.9 out of 100), indicating good water quality. The city's 2 water systems serve approximately 47,429 residents using purchased surface water.

Lead levels were measured at 0.0 ppb (90th percentile), well within EPA limits. UCMR 5 testing detected 2 PFAS compounds, with levels exceeding EPA maximum contaminant levels in the water supply. The system has 5 violations on record, including 0 health-based violations. 3 remain unresolved.

Bellflower ranks #336 out of 690 cities in California for water quality, placing it mid-range in the state. The city draws from surface water sources, which are more susceptible to seasonal runoff and agricultural contamination, requiring extensive multi-barrier treatment including coagulation, filtration, and disinfection. Of particular concern: PFAS "forever chemical" levels exceed the 2024 EPA maximum contaminant levels. These synthetic compounds don't break down naturally and require specialized filtration such as reverse osmosis or granular activated carbon. Hexavalent chromium (chromium-6) was detected at 1.40 µg/L in UCMR 3 testing. While below California's 10 µg/L limit and with no federal MCL set, residents sensitive to this contaminant may consider reverse osmosis filtration.

How the 81.9/100 breaks down Methodology →
ViolationsHistorical violation record including health-based and monitoring violations.
42.3 / 45A
Lead & CopperLead at 0.0 ppb (90th percentile).
20 / 20A
Contaminants2 PFAS compounds detected.
12.6 / 20C
ComplianceMonitoring and reporting compliance with EPA regulations.
3 / 10F
Source RiskWater source: Purchased surface water.
4 / 5B

02What's in Bellflower's water

Every contaminant flagged in Bellflower, on one shared scale: distance to its own legal limit. The red line is the limit — anything past it is out of compliance, and the closer a bar gets, the less headroom the system has.

10 detections · sorted by % of legal limit
Over the limit Elevated — watch Within limits
0 50% LEGAL LIMIT 150%

Over MCL — EPA MCL: 0.004 µg/L

PFAS "forever chemicals" exceed the 2024 EPA maximum contaminant levels, which utilities must meet by 2029. These compounds don't break down in the body or the environment. Reverse osmosis (NSF/ANSI 58) or certified granular activated carbon (NSF/ANSI 53) removes them at the tap.
Exceeds MCL What to do →
1,4-Dioxane Organic
6.30 µg/L 120% of limit
Chlorate Disinfection Byproduct
200.0 µg/L 95% of limit
Strontium Inorganic
820.0 µg/L 55% of limit
Manganese Inorganic
25.0 µg/L 50% of limit
Vanadium Inorganic
3.30 µg/L 16% of limit
Molybdenum Inorganic
3.10 µg/L 8% of limit
39 contaminants tested under EPA SDWIS, LCR and UCMR programs · 11 detected · 1 PFAS over EPA MCL · PFAS hazard index 4.25 (above the 1.0 threshold) Contaminants without a federal MCL are shown against the strictest state or advisory level named in each row.

Full contaminants report

Contaminant Detected Level EPA Limit Unit Category Status
Lead (90th percentile) 0.0 15 ppb Inorganic Safe
11Cl-PF3OUdS ND HI µg/L PFAS Not Detected
4:2 FTS ND HI µg/L PFAS Not Detected
6:2 FTS ND HI µg/L PFAS Not Detected
8:2 FTS ND HI µg/L PFAS Not Detected
9Cl-PF3ONS ND HI µg/L PFAS Not Detected
ADONA ND HI µg/L PFAS Not Detected
HFPO-DA ND 0.01 µg/L PFAS Not Detected
lithium ND HI µg/L PFAS Not Detected
NEtFOSAA ND HI µg/L PFAS Not Detected
NFDHA ND HI µg/L PFAS Not Detected
NMeFOSAA ND HI µg/L PFAS Not Detected
PFBA ND HI µg/L PFAS Not Detected
PFBS ND HI µg/L PFAS Not Detected
PFDA ND HI µg/L PFAS Not Detected
PFDoA ND HI µg/L PFAS Not Detected
PFEESA ND HI µg/L PFAS Not Detected
PFHpA ND HI µg/L PFAS Not Detected
PFHpS ND HI µg/L PFAS Not Detected
PFHxA ND HI µg/L PFAS Not Detected
PFHxS 0.005 HI µg/L PFAS Detected
PFMBA ND HI µg/L PFAS Not Detected
PFMPA ND HI µg/L PFAS Not Detected
PFNA ND HI µg/L PFAS Not Detected
PFOA ND 0.004 µg/L PFAS Not Detected
PFOS 0.017 0.004 µg/L PFAS Over MCL
PFPeA ND HI µg/L PFAS Not Detected
PFPeS ND HI µg/L PFAS Not Detected
PFTA ND HI µg/L PFAS Not Detected
PFTrDA ND HI µg/L PFAS Not Detected
PFUnA ND HI µg/L PFAS Not Detected
Data source: EPA SDWIS, UCMR 5, local utility CCR.

03Bellflower's ten-year track record

Each box is one year. A green check means no EPA violations; a numbered badge counts that year's violations — red if any were health-based, amber if they were monitoring or paperwork issues. The system has 5 violations on record, including 0 health-based violations. 3 remain unresolved.

8 of the last ten years were clean. The numbered years had EPA violations — red when any were health-based, amber when they were paperwork or missed-testing issues.

2 monitoring & paperwork 2 still unresolved
PFAS2 PFAS "forever chemical" compounds detectedPFAS levels exceed EPA maximum contaminant levels. Reverse osmosis or activated carbon filtration recommended.
UpdateWater quality data updatedLatest EPA compliance and testing data incorporated into Bellflower's water quality assessment. Grade: B+ (81.9/100).
Violation1 drinking water violation recordedContaminants: Lead and Copper Rule.Open
DisasterSEVERE WINTER STORMS, FLOODING, LANDSLIDES, AND MUDSLIDESFederal disaster declaration (FEMA DR-3592). Flood event — may have impacted local water infrastructure.
DisasterSEVERE WINTER STORMS, FLOODING, LANDSLIDES, AND MUDSLIDESFederal disaster declaration (FEMA DR-4683). Flood event — may have impacted local water infrastructure.
Violation1 drinking water violation recordedContaminants: Lead and Copper Rule.Open
Lead, 90th percentileppb · lower is better
05101520EPA action level · 15 ppb1992 — 5 ppb1993 — 0 ppb1994 — 5 ppb1995 — 5 ppb1997 — 5 ppb1998 — 3 ppb2000 — 3 ppb2001 — 3 ppb2003 — 4 ppb2004 — 11 ppb2005 — 5 ppb2007 — 0 ppb2008 — 5 ppb2010 — 1 ppb2011 — 11 ppb2013 — 0 ppb2014 — 0 ppb2016 — 1 ppb2017 — 0 ppb2019 — 0.72 ppb2022 — 0 ppb2023 — 0 ppb2024 — 0 ppb50199219982005201320222024

Down 5 ppb since 1992. Latest reading: 0 ppb (2024) — 0% of the action level. Sampled at higher-risk homes (90th percentile).

04Where Bellflower's water comes from

Bellflower's drinking water comes primarily from surface water sources such as rivers, lakes, or reservoirs.

Source

Purchased Surface Water

Rivers, lakes, or reservoirs — more exposed to runoff, agriculture, and seasonal swings than groundwater.

Treatment

Wholesale supplier

Multi-barrier treatment: coagulation, sedimentation, filtration, and disinfection to meet EPA standards.

Distribution

2 systems

2 water systems, operated under private ownership.

Delivery

47,429 people

Residents served across Bellflower's service area.

Surface water systems require multi-stage treatment including coagulation, sedimentation, filtration, and disinfection to meet EPA Safe Drinking Water Act standards. These sources can be impacted by seasonal changes, stormwater runoff, upstream agriculture, and industrial discharge. The system is operated by private ownership and serves approximately 47,429 people through 2 water systems.

System namePWSIDPopulationSource
BELLFLOWER - SOMERSET MWC CA1910013 46,300 Purchased Surface Water
BELLFLOWER HOME GARDEN WATER COMPANY CA1910012 1,129 Purchased Surface Water

Water bodies near Bellflower

Rio Hondo Bl Whittier Narrows Dam · river

As a surface-water system, these water bodies may directly influence Bellflower's drinking water supply.

05Pressure on Bellflower's watershed

Outside forces that shape what reaches the treatment plant. None of these is a verdict on the tap by itself — but each adds pressure worth knowing about.

Industrial discharge

Present — monitored

5 facilities within 10 miles reported 719 lb released to surface water in the latest EPA Toxics Release Inventory. Proximity doesn't equal tap contamination — treatment and hydrology decide — but it's pressure on the watershed.

TESORO LOS ANGELES REFINERY-CARSON OPERATIONS — zinc compounds 602 lb · 9.4 mi
ULTRAMAR INC WILMINGTON REFINERY — phenol 49 lb · 9.5 mi
PHILLIPS 66 LOS ANGELES TERMINAL — zinc compounds 26 lb · 8.8 mi
+ 2 more facilities

Flood & storm history

Recurring — declared disasters

10 federal disaster declarations on record for Los Angeles County. Flooding and severe storms can overwhelm treatment plants, cause sewage overflows, and push runoff into supplies.

SEVERE WINTER STORMS, FLOODING, LANDSLIDES, AND MUDSLIDES Mar 2023 · DR-3592
SEVERE WINTER STORMS, FLOODING, LANDSLIDES, AND MUDSLIDES Jan 2023 · DR-4683
SEVERE WINTER STORMS, FLOODING, AND MUDSLIDES Jan 2023 · DR-3591

Superfund proximity

Multiple tracked sites nearby

9 National Priorities List sites within 10 miles. Proximity does not necessarily indicate tap-water contamination — the connection depends on hydrology and treatment.

06How Bellflower compares

Scores for nearby California cities on one line, with the average marked.

Bellflower (this city)
81.9 · B+
Oakland
77.9 · B
Los Angeles
42.8 · F
San Diego
39.7 · F
Sacramento
31.2 · F
San Jose
28 · F

dashed line = California average (57/100)

Bellflower scores 81.9/100above the California average of 57/100. It outscores 8 of 10 nearby cities. Full California rankings →

Los Angeles water quality rankings
Compare all cities in the county — grades, violations, and contaminant data side by side.

07What to do at home

Steps matched to what testing actually found in Bellflower's water — not generic advice.

Because of pfas

Filter drinking & cooking water

Reverse osmosis system. PFAS compounds exceed EPA maximum contaminant levels

Compare tested filters →
Know your report

Read your utility's annual report

Every utility must publish a yearly Consumer Confidence Report with its own testing results. It pairs well with the independent data on this page.

How to read a CCR →
Stay informed

Watch for Bellflower alerts

This area has a history of flood declarations — after severe weather, watch for boil-water advisories from the utility, and check the live alerts on this page.

All water alerts →

Frequently asked questions

Is Bellflower, CA tap water safe to drink?

Bellflower's water quality earned a grade of B+ (81.9/100). The water generally meets EPA standards and is considered safe for consumption. The city ranks #336 out of 690 cities tested in California.

What contaminants are in Bellflower's water?

Lead was measured at 0.0 ppb (90th percentile). 2 PFAS compounds were detected. 5 violations are on record.

How is Bellflower's water quality grade calculated?

The grade is based on four factors: violation history (40%), lead and copper levels (25%), PFAS contamination (25%), and regulatory compliance (10%). The score is also adjusted based on how complete the available data is. See our methodology page for full details.

Do I need a water filter in Bellflower?

PFAS compounds exceed EPA limits — a reverse osmosis or activated carbon filter is recommended.

Where does Bellflower's water come from?

Bellflower's water is sourced from Purchased surface water. The city has 2 water systems serving approximately 47,429 residents.

How does Bellflower's water compare to other cities?

Bellflower ranks #336 out of 690 cities in California (better than 51% of state cities) and #7151 out of 15382 cities nationally (54th percentile). The grade of B+ reflects the combined assessment of violation history, lead and copper levels, PFAS contamination, and regulatory compliance.

Share this reportHelp others learn about their water quality
WhatsAppXFacebookLinkedInEmail
About Bellflower, CA: Median household income $75,379 · median home value $617,557 · median age 35.5 · 39% homeowners · 19.6% college educated. Service area: 2 ZIP codes across Los Angeles.
Show ZIP codes 9070690707
Sources: EPA SDWIS & ECHO · UCMR 3–5 · Lead & Copper Rule samples · EPA TRI · U.S. Drought Monitor · FEMA declarations. Data last updated Jul 2026. Analysis by the WaterVerge Editorial Team · methodology.