Skip to main content
WaterVerge

Water quality report · updated Jul 2026

Is Bath, ME Tap Water Safe to Drink?

Graded A- — but Copper was detected above EPA limits. Here's what's in the water and how to remove it. What to do ↓

1 contaminant over a legal limit
2.3 ppb lead, 90th percentile · low
5 unresolved violations
9K people served by 2 water systems

PWSID ME0090130 · high data confidence · local government utility

Reviewed by WaterVerge Editorial Team · Last updated July 2026
A 85 / 100

#64 of 156Maine cities
How we grade →

01The verdict: is Bath water safe?

Bath's drinking water has significant quality concerns based on EPA testing data. With a grade of A- (85/100), the system has issues across multiple categories. A water filter is recommended for all residents. The city's 2 water systems serve approximately 9,436 residents using surface water (rivers, lakes, or reservoirs).

The concern

Copper is over its legal limit

Measured at 2.20 mg/L against the EPA Action Level of 1.3 mg/L. The ledger below shows how far over — and which filter removes it.

See the measurement ↓
The good news

Lead is well under the limit

90th-percentile lead is 2.3 ppb — beneath the 15 ppb federal action level and under the 5 ppb watch threshold.

See the trend ↓
Keep watching

Manganese is approaching its limit

Measured at 38.5 µg/L — 77% of the 50 µg/L limit. Within the rules, but with less headroom than you'd want.

See the ledger ↓

Bath's drinking water received a grade of A- (85 out of 100), indicating good water quality. The city's 2 water systems serve approximately 9,436 residents using surface water.

Lead levels were measured at 2.3 ppb (90th percentile), well within EPA limits. PFAS testing under UCMR 5 found no detectable forever chemicals. The system has 31 violations on record, including 14 health-based violations. 5 remain unresolved.

Bath ranks #64 out of 156 cities in Maine for water quality, placing it mid-range in the state. The city draws from surface water sources, which are more susceptible to seasonal runoff and agricultural contamination, requiring extensive multi-barrier treatment including coagulation, filtration, and disinfection.

How the 85/100 breaks down Methodology →
ViolationsHistorical violation record including health-based and monitoring violations.
40.1 / 45B
Lead & CopperLead at 2.3 ppb (90th percentile).
16 / 20B
ContaminantsNo PFAS compounds detected.
16.9 / 20B
ComplianceMonitoring and reporting compliance with EPA regulations.
8 / 10B
Source RiskWater source: Surface water.
4 / 5B

02What's in Bath's water

Every contaminant flagged in Bath, on one shared scale: distance to its own legal limit. The red line is the limit — anything past it is out of compliance, and the closer a bar gets, the less headroom the system has.

4 detections · sorted by % of legal limit
Over the limit Elevated — watch Within limits
0 50% LEGAL LIMIT 150%

Over Limit — EPA Action Level: 1.3 mg/L

Exceeds the EPA action level. Copper leaches from household plumbing — flush taps for 30 seconds before drinking, and consider a certified filter.
Exceeds Limit What to do →
Manganese Inorganic
38.5 µg/L 77% of limit
34 contaminants tested under EPA SDWIS, LCR and UCMR programs · 4 detected

Full contaminants report

Contaminant Detected Level EPA Limit Unit Category Status
Lead (90th percentile) 2.3 15 ppb Inorganic Safe
Copper (90th percentile) 2.20 1.3 mg/L Inorganic Over Limit
11Cl-PF3OUdS ND HI µg/L PFAS Not Detected
4:2 FTS ND HI µg/L PFAS Not Detected
6:2 FTS ND HI µg/L PFAS Not Detected
8:2 FTS ND HI µg/L PFAS Not Detected
9Cl-PF3ONS ND HI µg/L PFAS Not Detected
ADONA ND HI µg/L PFAS Not Detected
HFPO-DA ND 0.01 µg/L PFAS Not Detected
lithium ND HI µg/L PFAS Not Detected
NEtFOSAA ND HI µg/L PFAS Not Detected
NFDHA ND HI µg/L PFAS Not Detected
NMeFOSAA ND HI µg/L PFAS Not Detected
PFBA ND HI µg/L PFAS Not Detected
PFBS ND HI µg/L PFAS Not Detected
PFDA ND HI µg/L PFAS Not Detected
PFDoA ND HI µg/L PFAS Not Detected
PFEESA ND HI µg/L PFAS Not Detected
PFHpA ND HI µg/L PFAS Not Detected
PFHpS ND HI µg/L PFAS Not Detected
PFHxA ND HI µg/L PFAS Not Detected
PFHxS ND HI µg/L PFAS Not Detected
PFMBA ND HI µg/L PFAS Not Detected
PFMPA ND HI µg/L PFAS Not Detected
PFNA ND HI µg/L PFAS Not Detected
PFOA ND 0.004 µg/L PFAS Not Detected
PFOS ND 0.004 µg/L PFAS Not Detected
PFPeA ND HI µg/L PFAS Not Detected
PFPeS ND HI µg/L PFAS Not Detected
PFTA ND HI µg/L PFAS Not Detected
PFTrDA ND HI µg/L PFAS Not Detected
PFUnA ND HI µg/L PFAS Not Detected
Data source: EPA SDWIS, UCMR 5, local utility CCR.

03Bath's ten-year track record

Each box is one year. A green check means no EPA violations; a numbered badge counts that year's violations — red if any were health-based, amber if they were monitoring or paperwork issues. The system has 31 violations on record, including 14 health-based violations. 5 remain unresolved.

8 of the last ten years were clean. The numbered years had EPA violations — red when any were health-based, amber when they were paperwork or missed-testing issues.

2 monitoring & paperwork 2 still unresolved
UpdateWater quality data updatedLatest EPA compliance and testing data incorporated into Bath's water quality assessment. Grade: A- (85/100).
DisasterHURRICANE LEEFederal disaster declaration (FEMA DR-3598). Hurricane event — may have impacted local water infrastructure.
DisasterSEVERE STORM AND FLOODINGFederal disaster declaration (FEMA DR-4719). Flood event — may have impacted local water infrastructure.
Violation1 drinking water violation recordedContaminants: Consumer Confidence Rule.Open
Violation1 drinking water violation recordedContaminants: Lead and Copper Rule.Open
Violation1 drinking water violation recordedContaminants: Lead and Copper Rule.Open
Lead, 90th percentileppb · lower is better
010203040EPA action level · 15 ppb1992 — 21 ppb1993 — 21 ppb1994 — 28 ppb1996 — 15 ppb1997 — 13 ppb1998 — 18 ppb1999 — 9 ppb2000 — 0 ppb2001 — 8 ppb2002 — 5 ppb2003 — 18 ppb2004 — 3 ppb2005 — 2 ppb2008 — 25 ppb2009 — 1 ppb2010 — 3 ppb2011 — 3 ppb2012 — 1.3 ppb2013 — 0 ppb2016 — 1.2 ppb2017 — 14 ppb2018 — 2.3 ppb2020 — 7.2 ppb2021 — 2 ppb2023 — 3.2 ppb2024 — 2.3 ppb212.3199219992005201320232024

Down 19 ppb since 1992. Latest reading: 2.3 ppb (2024) — 15% of the action level. Sampled at higher-risk homes (90th percentile).

Copper, 90th percentilemg/L

2.2mg/L(2007)

One sampling round on record — 169% of the 1.3mg/L EPA action level. Sampled at higher-risk homes (90th percentile).

04Where Bath's water comes from

Bath's drinking water comes primarily from surface water sources such as rivers, lakes, or reservoirs.

Source

Surface Water

Rivers, lakes, or reservoirs — more exposed to runoff, agriculture, and seasonal swings than groundwater.

Treatment

Local treatment

Multi-barrier treatment: coagulation, sedimentation, filtration, and disinfection to meet EPA standards.

Distribution

2 systems

2 water systems, operated under local government ownership.

Delivery

9,436 people

Residents served across Bath's service area.

Surface water systems require multi-stage treatment including coagulation, sedimentation, filtration, and disinfection to meet EPA Safe Drinking Water Act standards. These sources can be impacted by seasonal changes, stormwater runoff, upstream agriculture, and industrial discharge. The system is operated by local government ownership and serves approximately 9,436 people through 2 water systems.

System namePWSIDPopulationSource
BATH WATER DISTRICT ME0090130 9,290 Surface Water
HILLHOUSE INC ME0095240 146 Groundwater

05Pressure on Bath's watershed

Outside forces that shape what reaches the treatment plant. None of these is a verdict on the tap by itself — but each adds pressure worth knowing about.

Industrial discharge

Present — monitored

4 facilities within 10 miles reported 8 lb released to surface water in the latest EPA Toxics Release Inventory. Proximity doesn't equal tap contamination — treatment and hydrology decide — but it's pressure on the watershed.

BATH IRON WORKS-STRUCTURAL FABRICATION FACILITY (FORMERLY HA — manganese 5 lb · 2.3 mi
BATH IRON WORKS OUTFIT FABRICATION FACILITY (FORMERLY EBMF) — manganese 2 lb · 2.4 mi
BATH IRON WORKS — manganese 0 lb · 2.2 mi
+ 1 more facilities

Flood & storm history

Recurring — declared disasters

9 federal disaster declarations on record for Sagadahoc County. Flooding and severe storms can overwhelm treatment plants, cause sewage overflows, and push runoff into supplies.

HURRICANE LEE Sep 2023 · DR-3598
SEVERE STORM AND FLOODING Jul 2023 · DR-4719
HURRICANE KATRINA EVACUATION Sep 2005 · DR-3256

Superfund proximity

Low — tracked and monitored

1 National Priorities List site within 10 miles. Proximity does not necessarily indicate tap-water contamination — the connection depends on hydrology and treatment.

06How Bath compares

Scores for nearby Maine cities on one line, with the average marked.

Cumberland
93.8 · A
Portland
93.2 · A
Falmouth
92.8 · A
Bath (this city)
85 · A-
Raymond
55.9 · C-

dashed line = Maine average (85/100)

Bath scores 85/100on par with the Maine average of 85/100. It outscores 3 of 10 nearby cities. Full Maine rankings →

Sagadahoc water quality rankings
Compare all cities in the county — grades, violations, and contaminant data side by side.

07What to do at home

Steps matched to what testing actually found in Bath's water — not generic advice.

Because of copper

Filter drinking & cooking water

NSF-certified water filter. Copper exceeds the EPA action level of 1.3 mg/L

Compare tested filters →
Know your report

Read your utility's annual report

Every utility must publish a yearly Consumer Confidence Report with its own testing results. It pairs well with the independent data on this page.

How to read a CCR →
Stay informed

Watch for Bath alerts

This area has a history of flood declarations — after severe weather, watch for boil-water advisories from the utility, and check the live alerts on this page.

All water alerts →

Frequently asked questions

Is Bath, ME tap water safe to drink?

Bath's water quality earned a grade of A- (85/100). The water generally meets EPA standards and is considered safe for consumption. The city ranks #64 out of 156 cities tested in Maine.

What contaminants are in Bath's water?

Lead was measured at 2.3 ppb (90th percentile). No PFAS compounds were detected. 31 violations are on record.

How is Bath's water quality grade calculated?

The grade is based on four factors: violation history (40%), lead and copper levels (25%), PFAS contamination (25%), and regulatory compliance (10%). The score is also adjusted based on how complete the available data is. See our methodology page for full details.

Do I need a water filter in Bath?

Based on current data, basic filtration should suffice for additional peace of mind.

Where does Bath's water come from?

Bath's water is sourced from Surface water. The city has 2 water systems serving approximately 9,436 residents.

What health violations has Bath's water system had?

Bath has 14 health-based violations on record. The most recent violation was recorded in July 2023. Health-based violations mean the water exceeded EPA maximum contaminant levels (MCLs) for a regulated substance. 5 violations remain unresolved.

How does Bath's water compare to other cities?

Bath ranks #64 out of 156 cities in Maine (better than 59% of state cities) and #5510 out of 15382 cities nationally (64th percentile). The grade of A- reflects the combined assessment of violation history, lead and copper levels, PFAS contamination, and regulatory compliance.

Share this reportHelp others learn about their water quality
WhatsAppXFacebookLinkedInEmail
About Bath, ME: Bath is a city in and county seat of Sagadahoc County, Maine, United States. Bath had a 2024 population of 8,870. Bath is growing at a rate of 0.29% annually, and its population has increased by 1.21% since the most recent census, which recorded a population of 8,764 in 2020. The city is popular with tourists, many drawn by its 19th-century architecture. It is home to the Bath Iron Works and Heritage Days Festival, held annually during the Fourth of July weekend. It is commonly known as the "City of Ships" due to the number of sailing ships that were built in the Bath shipyards. Bath is part of the Portland-South Portland-Biddeford metropolitan statistical area. Wikipedia → Sources: EPA SDWIS & ECHO · UCMR 3–5 · Lead & Copper Rule samples · EPA TRI · U.S. Drought Monitor · FEMA declarations. Data last updated Jul 2026. Analysis by the WaterVerge Editorial Team · methodology.