Skip to main content
WaterVerge

Water quality report · updated Jul 2026

Is Anasco, PR Tap Water Safe to Drink?

Graded F — but Lead, Copper and 2 more were detected above EPA limits. Here's what's in the water and how to remove it. What to do ↓

4 contaminants over a legal limit
17.0 ppb lead, 90th percentile
18 unresolved violations
1K people served by 4 water systems

PWSID PR0306093 · high data confidence · local government utility

Reviewed by WaterVerge Editorial Team · Last updated July 2026
F 30.1 / 100

#100 of 101Puerto Rico cities
How we grade →

01The verdict: is Anasco water safe?

Anasco's drinking water has significant quality concerns based on EPA testing data. With a grade of F (30.1/100), the system has issues across multiple categories. A water filter is recommended for all residents. The city's 4 water systems serve approximately 1,051 residents using groundwater (wells).

The concern

Lead is over its legal limit

Measured at 17.0 ppb against the EPA Action Level of 15 ppb. The ledger below shows how far over — and which filter removes it.

See the measurement ↓
The good news

No forever chemicals detected

UCMR 5 laboratory testing found no PFAS compounds above detection thresholds in this system.

See PFAS results ↓
Keep watching

Vanadium is approaching its limit

Measured at 19.16 µg/L — 91% of the 21 µg/L limit. Within the rules, but with less headroom than you'd want.

See the ledger ↓

Anasco's drinking water received a grade of F (30.1 out of 100), indicating failing water quality. The city's 4 water systems serve approximately 1,051 residents using groundwater.

Lead levels were measured at 17.0 ppb (90th percentile), which exceeds the EPA action level of 15 ppb. PFAS testing under UCMR 5 found no detectable forever chemicals. The system has 1292 violations on record, including 155 health-based violations. 18 remain unresolved.

Anasco ranks #100 out of 101 cities in Puerto Rico for water quality, placing it among the lowest-rated in the state. The city draws from surface water sources, which are more susceptible to seasonal runoff and agricultural contamination, requiring extensive multi-barrier treatment including coagulation, filtration, and disinfection. Hexavalent chromium (chromium-6) was detected at 1.79 µg/L in UCMR 3 testing. While below California's 10 µg/L limit and with no federal MCL set, residents sensitive to this contaminant may consider reverse osmosis filtration. Lead levels exceed the EPA action level of 15 ppb, which typically indicates aging lead service lines or lead solder in the distribution system. An NSF 53-certified filter is strongly recommended for drinking and cooking water. As a small community water system, Anasco may have fewer resources for advanced treatment technologies and infrastructure upgrades compared to larger utilities. The system has seen 60 violations in the past five years, suggesting a pattern of compliance challenges that residents should monitor closely.

How the 30.1/100 breaks down Methodology →
ViolationsHistorical violation record including health-based and monitoring violations.
0 / 45F
Lead & CopperLead at 17.0 ppb (90th percentile).
1 / 20F
ContaminantsNo PFAS compounds detected.
14.1 / 20C
ComplianceMonitoring and reporting compliance with EPA regulations.
10 / 10A
Source RiskWater source: Groundwater.
5 / 5A

02What's in Anasco's water

Every contaminant flagged in Anasco, on one shared scale: distance to its own legal limit. The red line is the limit — anything past it is out of compliance, and the closer a bar gets, the less headroom the system has.

8 detections · sorted by % of legal limit
Over the limit Elevated — watch Within limits
0 50% LEGAL LIMIT 150%

Over Limit — EPA Action Level: 1.3 mg/L

Exceeds the EPA action level. Copper leaches from household plumbing — flush taps for 30 seconds before drinking, and consider a certified filter.
Exceeds Limit What to do →
Manganese Inorganic
176.3 µg/L 120% of limit
Chlorate Disinfection Byproduct
706.0 µg/L 120% of limit
Vanadium Inorganic
19.16 µg/L 91% of limit
Strontium Inorganic
679.8 µg/L 45% of limit
38 contaminants tested under EPA SDWIS, LCR and UCMR programs · 8 detected Contaminants without a federal MCL are shown against the strictest state or advisory level named in each row.

Full contaminants report

Contaminant Detected Level EPA Limit Unit Category Status
Lead (90th percentile) 17.0 15 ppb Inorganic Over Limit
Copper (90th percentile) 50.00 1.3 mg/L Inorganic Over Limit
11Cl-PF3OUdS ND HI µg/L PFAS Not Detected
4:2 FTS ND HI µg/L PFAS Not Detected
6:2 FTS ND HI µg/L PFAS Not Detected
8:2 FTS ND HI µg/L PFAS Not Detected
9Cl-PF3ONS ND HI µg/L PFAS Not Detected
ADONA ND HI µg/L PFAS Not Detected
HFPO-DA ND 0.01 µg/L PFAS Not Detected
lithium ND HI µg/L PFAS Not Detected
NEtFOSAA ND HI µg/L PFAS Not Detected
NFDHA ND HI µg/L PFAS Not Detected
NMeFOSAA ND HI µg/L PFAS Not Detected
PFBA ND HI µg/L PFAS Not Detected
PFBS ND HI µg/L PFAS Not Detected
PFDA ND HI µg/L PFAS Not Detected
PFDoA ND HI µg/L PFAS Not Detected
PFEESA ND HI µg/L PFAS Not Detected
PFHpA ND HI µg/L PFAS Not Detected
PFHpS ND HI µg/L PFAS Not Detected
PFHxA ND HI µg/L PFAS Not Detected
PFHxS ND HI µg/L PFAS Not Detected
PFMBA ND HI µg/L PFAS Not Detected
PFMPA ND HI µg/L PFAS Not Detected
PFNA ND HI µg/L PFAS Not Detected
PFOA ND 0.004 µg/L PFAS Not Detected
PFOS ND 0.004 µg/L PFAS Not Detected
PFPeA ND HI µg/L PFAS Not Detected
PFPeS ND HI µg/L PFAS Not Detected
PFTA ND HI µg/L PFAS Not Detected
PFTrDA ND HI µg/L PFAS Not Detected
PFUnA ND HI µg/L PFAS Not Detected
Data source: EPA SDWIS, UCMR 5, local utility CCR.

03Anasco's ten-year track record

Each box is one year. A green check means no EPA violations; a numbered badge counts that year's violations — red if any were health-based, amber if they were monitoring or paperwork issues. The system has 1292 violations on record, including 155 health-based violations. 18 remain unresolved.

1 of the last ten years was clean. The numbered years had EPA violations — red when any were health-based, amber when they were paperwork or missed-testing issues.

9 health-based in 10 yrs 154 monitoring & paperwork 11 still unresolved
UpdateWater quality data updatedLatest EPA compliance and testing data incorporated into Anasco's water quality assessment. Grade: F (30.1/100).
Violation1 drinking water violation recordedContaminants: Revised Total Coliform Rule.Resolved
Violation1 drinking water violation recordedContaminants: Revised Total Coliform Rule.Resolved
Violation1 drinking water violation recordedContaminants: Revised Total Coliform Rule.Resolved
Lead, 90th percentileppb · lower is better
0510152025EPA action level · 15 ppb1992 — 5 ppb1993 — 7 ppb2000 — 3 ppb2001 — 3.3 ppb2002 — 1.3 ppb2003 — 1.8 ppb2006 — 3 ppb2009 — 7 ppb2010 — 21 ppb2012 — 6 ppb2015 — 6 ppb2019 — 17 ppb51719922001200620122019

Up 12 ppb since 1992. The latest reading (17 ppb, 2019) is over the action level. Sampled at higher-risk homes (90th percentile).

Copper, 90th percentilemg/L

50mg/L(2015)

One sampling round on record — 3846% of the 1.3mg/L EPA action level. Sampled at higher-risk homes (90th percentile).

04Where Anasco's water comes from

Anasco's drinking water comes primarily from surface water sources such as rivers, lakes, or reservoirs.

Source

Surface Water

Rivers, lakes, or reservoirs — more exposed to runoff, agriculture, and seasonal swings than groundwater.

Treatment

Local treatment

Multi-barrier treatment: coagulation, sedimentation, filtration, and disinfection to meet EPA standards.

Distribution

4 systems

4 water systems, operated under local government ownership.

Delivery

1,051 people

Residents served across Anasco's service area.

Surface water systems require multi-stage treatment including coagulation, sedimentation, filtration, and disinfection to meet EPA Safe Drinking Water Act standards. These sources can be impacted by seasonal changes, stormwater runoff, upstream agriculture, and industrial discharge. The system is operated by local government ownership and serves approximately 1,051 people through 4 water systems.

System namePWSIDPopulationSource
MAYAGUEZ PR0003283 151,555 Surface Water
ORGANIZACION COM. AJIES (OCCA) PR0306093 427 Groundwater
COMITE COMUNAL DE CORCOVADA PR0306023 374 Groundwater
ACUED. RURAL BO. HATILLO ANASCO PR0306053 250 Groundwater

Water bodies near Anasco

Rio Rosario Nr Hormigueros · river Rio Guanajibo Nr Hormigueros · river Rio Grande De Anasco Nr San Sebastian · river Lago Daguey Above Anasco · lake

These water bodies shape the regional watershed and can indirectly affect groundwater quality.

05How Anasco compares

Scores for nearby Puerto Rico cities on one line, with the average marked.

Mayaguez
42.1 · F
San Juan
38.5 · F
Toa Alta
38.5 · F
Aguadilla
38.3 · F
Ponce
34.9 · F
Anasco (this city)
30.1 · F

dashed line = Puerto Rico average (39/100)

Anasco scores 30.1/100below the Puerto Rico average of 39/100.

Mayaguez Municipio water quality rankings
Compare all cities in the county — grades, violations, and contaminant data side by side.

06What to do at home

Steps matched to what testing actually found in Anasco's water — not generic advice.

Because of lead

Filter drinking & cooking water

NSF 53-certified pitcher or under-sink filter. Lead level (17.0 ppb) exceeds the EPA action level of 15 ppb

Compare tested filters →
Because lead was detected

Flush taps & check your service line

Lead leaches from pipes as water sits. Run cold water 30 seconds before drinking (especially mornings), and ask the utility whether your address still has a lead service line.

Lead risks explained →
Stay informed

Watch for Anasco alerts

We refresh EPA data monthly and surface new violations, advisories, and boil-water notices for your county on this page.

All water alerts →

Frequently asked questions

Is Anasco, PR tap water safe to drink?

Anasco's water quality earned a grade of F (30.1/100). Significant issues have been found. A water filter is strongly recommended. The city ranks #100 out of 101 cities tested in Puerto Rico.

What contaminants are in Anasco's water?

Lead was measured at 17.0 ppb (90th percentile). No PFAS compounds were detected. 1292 violations are on record.

How is Anasco's water quality grade calculated?

The grade is based on four factors: violation history (40%), lead and copper levels (25%), PFAS contamination (25%), and regulatory compliance (10%). The score is also adjusted based on how complete the available data is. See our methodology page for full details.

Do I need a water filter in Anasco?

Yes — lead levels exceed the EPA action level of 15 ppb. We recommend an NSF 53-certified filter or reverse osmosis system. Based on current data, basic filtration should suffice for additional peace of mind.

Where does Anasco's water come from?

Anasco's water is sourced from Groundwater. The city has 4 water systems serving approximately 1,051 residents.

What health violations has Anasco's water system had?

Anasco has 155 health-based violations on record. The most recent violation was recorded in December 2025. Health-based violations mean the water exceeded EPA maximum contaminant levels (MCLs) for a regulated substance. 18 violations remain unresolved.

Is Anasco's groundwater at risk of contamination?

Anasco uses groundwater, which can be affected by naturally occurring contaminants like arsenic, radon, and nitrate, as well as agricultural runoff and industrial activity. The system has 1292 violations on record that may relate to groundwater quality. Groundwater systems are generally less susceptible to surface contamination but should be monitored for emerging contaminants like PFAS.

How does Anasco's water compare to other cities?

Anasco ranks #100 out of 101 cities in Puerto Rico (better than 1% of state cities) and #15325 out of 15382 cities nationally (0th percentile). The grade of F reflects the combined assessment of violation history, lead and copper levels, PFAS contamination, and regulatory compliance.

Share this reportHelp others learn about their water quality
WhatsAppXFacebookLinkedInEmail
About Anasco, PR: Mayagüez is the ninth-largest municipality in Puerto Rico. It was founded as Pueblo de Nuestra Señora de la Candelaria de Mayagüez, and is also known as La Sultana del Oeste, Ciudad de las Aguas Puras, or Ciudad del Mangó. On April 6, 1894, the Spanish Crown granted it the formal title of Excelente Ciudad de Mayagüez. Mayagüez is located in the center of the western coast on the island of Puerto Rico. It has a population of 73,077, and it is the principal city of the Mayagüez Metropolitan Statistical Area and the Mayagüez–Aguadilla, PR Combined Statistical Area. Median household income $25,233 · median home value $113,520 · median age 50.7 · 59.2% homeowners. Wikipedia → Service area: 3 ZIP codes across Mayaguez Municipio.
Show ZIP codes 006800068100682
Sources: EPA SDWIS & ECHO · UCMR 3–5 · Lead & Copper Rule samples · EPA TRI · U.S. Drought Monitor · FEMA declarations. Data last updated Jul 2026. Analysis by the WaterVerge Editorial Team · methodology.