Is Allenstown, NH Tap Water Safe to Drink?
Graded C- — but Lead and Copper were detected above EPA limits. Here's what's in the water and how to remove it. What to do next ↓
59.4/100
waterverge.com Allenstown, NH — Water Quality Report
Allenstown's drinking water received a grade of C- (59.4 out of 100), indicating poor water quality. The city's 3 water systems serve approximately 1,426 residents using purchased ground water.
Lead levels were measured at 60.0 ppb (90th percentile), which exceeds the EPA action level of 15 ppb. This system has not yet been tested for PFAS under the EPA UCMR 5 program.
The system has 58 violations on record, including 32 health-based violations. 19 remain unresolved.
What to know about Allenstown's water
Allenstown ranks #72 out of 119 cities in New Hampshire for water quality, placing it below average in the state.
Allenstown purchases its water from a regional wholesaler, meaning quality depends on both the supplier's treatment and the local distribution system's condition.
Lead levels exceed the EPA action level of 15 ppb, which typically indicates aging lead service lines or lead solder in the distribution system. An NSF 53-certified filter is strongly recommended for drinking and cooking water.
As a small community water system, Allenstown may have fewer resources for advanced treatment technologies and infrastructure upgrades compared to larger utilities.
Water quality score
See methodology →Is Allenstown, NH water safe to drink?
Allenstown's drinking water has significant quality concerns based on EPA testing data. With a grade of C- (59.4/100), the system has issues across multiple categories. A water filter is recommended for all residents. The city's 3 water systems serve approximately 1,426 residents using groundwater (wells).
Recent water quality updates for Allenstown
A timeline of significant water quality events, violations, and data updates.
Latest EPA compliance and testing data incorporated into Allenstown's water quality assessment. Grade: C- (59.4/100).
1 health-based. Contaminants: Revised Total Coliform Rule.
Contaminants: Consumer Confidence Rule.
1 health-based. Contaminants: E. COLI, Revised Total Coliform Rule.
Federal disaster declaration (FEMA DR-3360). Hurricane event — may have impacted local water infrastructure.
Federal disaster declaration (FEMA DR-4026). Hurricane event — may have impacted local water infrastructure.
Key contaminant findings
Based on the most recent EPA sampling data for Allenstown's water supply.
Exceeds EPA action level. Lead service line replacement and point-of-use filtration recommended.
Exceeds EPA action level. Copper can leach from household plumbing — flush taps for 30 seconds before drinking.
Violation history
Allenstown's water system has 58 total violations on record, including 32 health-based violations. 19 remain unresolved. 4 violations were issued in the last 5 years.
Flood & environmental risk
Merrimack County has experienced 9 federally declared disasters since 1973. Flooding and severe storms can overwhelm water treatment plants, cause sewage overflows, and introduce agricultural runoff, bacteria, and sediment into drinking water supplies. Local water sources include Suncook River, Piscataquog River.
Where does Allenstown's water come from?
Allenstown's drinking water comes from groundwater (wells), supplied by 3 water systems serving approximately 1,426 people. Groundwater is generally less susceptible to surface contamination but can contain naturally occurring contaminants like arsenic, radon, and nitrate. Nearby water bodies include Suncook River (river), Piscataquog River (river).
What Allenstown residents can do
Recommended: NSF 53-certified pitcher or under-sink filter. This addresses the specific contaminants found in Allenstown's water.
Your water utility is required to publish an annual Consumer Confidence Report (CCR) with detailed testing results. Ask for the latest copy or check your utility's website.
Run cold water for 30 seconds before drinking, especially in the morning. Lead and copper leach from household plumbing when water sits in pipes.
Allenstown's area has a history of flooding. After severe weather, watch for boil water advisories from your local utility.
Data: EPA SDWIS, UCMR 5 (PFAS), FEMA, NOAA. Last updated May 2026.
Top contaminants to know
View all ↓Violation summary
Violations & advisories
Drought conditions
D2 — severe droughtMerrimack County is currently in D2 (severe drought) per the U.S. Drought Monitor (week of May 5, 2026). Drought can elevate disinfection-byproduct (TTHM/HAA5) levels and taste/odor issues as utilities draw from lower reservoirs.
Source: U.S. Drought Monitor, updated weekly by NDMC, USDA, and NOAA.
Flood & disaster history
Merrimack County has experienced 9 federally declared disasters since 1973. Flooding and severe weather can compromise water treatment infrastructure and introduce contaminants into drinking water supplies.
Recommended water filters
Based on contaminants detected in Allenstown's water supply, we recommend the following filter types.
Full contaminants report
| Contaminant | Detected Level | EPA Limit | Unit | Category | Status |
|---|---|---|---|---|---|
| Lead (90th percentile) LeadHeavy Metal A toxic heavy metal that can leach into drinking water from older pipes, solder, and fixtures. No amount of lead in water is considered safe. Health EffectsBrain and nervous system damage in children, kidney damage, high blood pressure, and reproductive problems in adults. EPA Limit15 ppb action level Common SourcesCorrosion of lead pipes, lead solder, brass faucets, and household plumbing. | 60.0 | 15 | ppb | Inorganic | Over Limit |
| Copper (90th percentile) CopperInorganic A metal that enters drinking water mainly through corrosion of copper plumbing. Small amounts are essential for health, but excess levels are harmful. Health EffectsGastrointestinal distress (nausea, vomiting, diarrhea) at short-term high levels; liver and kidney damage from long-term exposure. EPA Limit1.3 mg/L action level Common SourcesCorrosion of copper household plumbing, erosion of natural deposits. | 3.32 | 1.3 | mg/L | Inorganic | Over Limit |
Lead level (90th percentile)
Latest reading: 60.0 ppb (2012)
EPA action level: 15 ppb
Copper level (90th percentile)
Latest reading: 3.320 mg/L (1993)
EPA action level: 1.3 mg/L
See how Allenstown compares by contaminant
Explore where Allenstown ranks among all New Hampshire cities for specific contaminants.
Water source & infrastructure
Where Allenstown's water comes from
Allenstown purchases its water supply from a regional wholesale provider rather than treating raw water directly.
Water quality depends on both the wholesaler's treatment standards and the condition of Allenstown's local distribution pipes and storage facilities.
Purchased water systems are common in suburban areas and smaller communities that lack the infrastructure for independent treatment.
The system is operated by private ownership and serves approximately 1,426 people through 3 water systems.
Water bodies near Allenstown
Allenstown is located near 2 notable water bodies. These water bodies contribute to the regional watershed and may indirectly affect groundwater quality.
Water systems serving Allenstown
| System Name | PWSID | Population | Source |
|---|---|---|---|
| BEAR VIEW CROSSING | NH0043050 | 800 | GWP |
| CATAMOUNT HILL | NH0043040 | 383 | GW |
| OLDE TOWNE | NH0043020 | 243 | GW |
How Allenstown compares
Full New Hampshire rankings →Allenstown's score of 59.4/100 is below the average of 69/100 among major New Hampshire cities. It outscores 4 of 10 nearby cities. 6 of 10 nearby cities score higher.
Nearby cities
View New Hampshire rankings →About Allenstown, NH
Learn more about your water
Guides and resources related to Allenstown's water quality findings.
Explore water quality across Merrimack
Frequently asked questions
Is Allenstown, NH tap water safe to drink?
Allenstown's water quality earned a grade of C- (59.4/100). Significant issues have been found. A water filter is strongly recommended. The city ranks #72 out of 119 cities tested in New Hampshire.
What contaminants are in Allenstown's water?
Lead was measured at 60.0 ppb (90th percentile). 58 violations are on record.
How is Allenstown's water quality grade calculated?
The grade is based on four factors: violation history (40%), lead and copper levels (25%), PFAS contamination (25%), and regulatory compliance (10%). The score is also adjusted based on how complete the available data is. See our methodology page for full details.
Do I need a water filter in Allenstown?
Yes — lead levels exceed the EPA action level of 15 ppb. We recommend an NSF 53-certified filter or reverse osmosis system. Based on current data, basic filtration should suffice for additional peace of mind.
Where does Allenstown's water come from?
Allenstown's water is sourced from Purchased ground water. The city has 3 water systems serving approximately 1,426 residents.
What health violations has Allenstown's water system had?
Allenstown has 32 health-based violations on record. The most recent violation was recorded in July 2023. Health-based violations mean the water exceeded EPA maximum contaminant levels (MCLs) for a regulated substance. 19 violations remain unresolved.
Is Allenstown's groundwater at risk of contamination?
Allenstown uses groundwater, which can be affected by naturally occurring contaminants like arsenic, radon, and nitrate, as well as agricultural runoff and industrial activity. The system has 58 violations on record that may relate to groundwater quality. Groundwater systems are generally less susceptible to surface contamination but should be monitored for emerging contaminants like PFAS.
How does Allenstown's water compare to other cities?
Allenstown ranks #72 out of 119 cities in New Hampshire (better than 39% of state cities) and #12186 out of 15744 cities nationally (23th percentile). The grade of C- reflects the combined assessment of violation history, lead and copper levels, PFAS contamination, and regulatory compliance.