WaterVerge

Is Albany, KY Tap Water Safe to Drink?

Graded B-, with 19 unresolved violations on record. See what was cited — and what it means for your tap. What to do next ↓

9K residents served 1 water system PWSID: KY0270003
Overall Score
72.8 / 100
Violations
19 active
Last Updated
May 2026
Source
Surface water
#192 of 246 in Kentucky Top 65% nationally
Local Government
High data confidence
Reviewed by WaterVerge Editorial Team · Last updated May 2026
B-GRADE
Water Quality Grade
72.8/100
waterverge.com
B- 72.8/100

Albany, KY — Water Quality Report

Albany's drinking water received a grade of B- (72.8 out of 100), indicating fair water quality. The city's 1 water system serves approximately 9,042 residents using surface water.

Lead levels were measured at 0.0 ppb (90th percentile), well within EPA limits. PFAS testing under UCMR 5 found no detectable forever chemicals.

The system has 60 violations on record, including 21 health-based violations. 19 remain unresolved.

Data last updated: May 2026 · Source: EPA SDWIS, UCMR 5
Analysis

What to know about Albany's water

Albany ranks #192 out of 246 cities in Kentucky for water quality, placing it among the lowest-rated in the state.

The city draws from surface water sources, which are more susceptible to seasonal runoff and agricultural contamination, requiring extensive multi-barrier treatment including coagulation, filtration, and disinfection.

Haloacetic acid (HAA5) levels were elevated at 40.5 µg/L in UCMR 4 testing, though below the 60 µg/L EPA limit. Activated carbon filtration can help reduce these disinfection byproducts.

Hexavalent chromium (chromium-6) was detected at 0.06 µg/L in UCMR 3 testing. While below California's 10 µg/L limit and with no federal MCL set, residents sensitive to this contaminant may consider reverse osmosis filtration.

The system has seen 7 violations in the past five years, suggesting a pattern of compliance challenges that residents should monitor closely.

Quality Breakdown

Water quality score

See methodology →
72.8 out of 100 Grade B-
A: 90-100
B: 74-89
C: 60-73
F: <50
How is this calculated?
Violations
26.4/45
D
Historical violation record including health-based and monitoring violations.
Lead & Copper
20/20
A
Lead at 0.0 ppb (90th percentile).
Contaminants
17.4/20
B
No PFAS compounds detected.
Compliance
5/10
D
Monitoring and reporting compliance with EPA regulations.
Source Risk
4/5
B
Water source: Surface water.
Water Safety

Is Albany, KY water safe to drink?

Concerns Identified

Albany's drinking water has significant quality concerns based on EPA testing data. With a grade of B- (72.8/100), the system has issues across multiple categories. A water filter is recommended for all residents. The city's 1 water system serves approximately 9,042 residents using surface water (rivers, lakes, or reservoirs).

19
Active Violations
0.0 ppb
Lead (90th %ile)
None
PFAS Detected
1 event
Disaster History

Recent water quality updates for Albany

A timeline of significant water quality events, violations, and data updates.

Update
Water quality data updated

Latest EPA compliance and testing data incorporated into Albany's water quality assessment. Grade: B- (72.8/100).

Violation
1 drinking water violation recorded

Contaminants: Public Notice.

Violation
1 drinking water violation recorded

Contaminants: Consumer Confidence Rule.

Violation
1 drinking water violation recorded

Contaminants: Public Notice.

Disaster
HURRICANE KATRINA

Federal disaster declaration (FEMA DR-3231). Hurricane event — may have impacted local water infrastructure.

Key contaminant findings

Based on the most recent EPA sampling data for Albany's water supply.

Lead Within Limits
Detected: 0.0 ppb Limit: 15 ppb (EPA Action Level)

Well within EPA limits.

HAA5 (Disinfection Byproducts) Elevated
Detected: 40.5 µg/L Limit: 60 µg/L (EPA MCL)

Elevated disinfection byproduct levels. These form when chlorine interacts with organic matter during water treatment.

Violation history

Albany's water system has 60 total violations on record, including 21 health-based violations. 19 remain unresolved. 7 violations were issued in the last 5 years.

OtherMCLMONMRTT
Most recent violations:
Oct 2022 Public Notice Open
Jul 2022 Consumer Confidence Rule Open
Nov 2021 Public Notice Open
Oct 2021 Total Haloacetic Acids (HAA5) Resolved
Aug 2021 Revised Total Coliform Rule Resolved

Flood & environmental risk

Clinton County has experienced 1 federally declared disaster since 2005. Flooding and severe storms can overwhelm water treatment plants, cause sewage overflows, and introduce agricultural runoff, bacteria, and sediment into drinking water supplies. Local water sources include Wolf River.

HURRICANE KATRINA
Hurricane FEMA DR-3231

Where does Albany's water come from?

Albany's drinking water comes from surface water (rivers, lakes, or reservoirs), supplied by 1 water system serving approximately 9,042 people. Surface water sources are more susceptible to contamination from runoff, industrial discharge, and algal blooms, requiring extensive treatment. Nearby water bodies include Wolf River (river).

What Albany residents can do

Install a water filter

Recommended: NSF-certified water filter. This addresses the specific contaminants found in Albany's water.

Request your utility's CCR

Your water utility is required to publish an annual Consumer Confidence Report (CCR) with detailed testing results. Ask for the latest copy or check your utility's website.

Data: EPA SDWIS, UCMR 5 (PFAS), FEMA, NOAA. Last updated May 2026.

Contaminant Alerts

Top contaminants to know

View all ↓
Lead (90th percentile)
Inorganic / Heavy Metal
Safe
0.0 ppb
EPA Action Level: 15 ppb · 0% of limit
Safe Level
HAA5 (Disinfection Byproducts)
Disinfection Byproduct
Near MCL
40.5 µg/L
EPA MCL: 60 µg/L · 67% of limit
ElevatedUCMR 4 DataHAA6Br: 3.9 µg/LHAA9: 44.1 µg/L
Chromium-6 (Hexavalent Chromium)
Inorganic
Detected
0.06 µg/L
CA MCL (no federal MCL): 10 µg/L · 1% of limit
DetectedUCMR 3 Data
Strontium
Inorganic
Detected
118.0 µg/L
EPA Health Ref Level: 1,500 µg/L · 8% of limit
DetectedUCMR 3 Data
Manganese
Inorganic
Detected
3.8 µg/L
EPA Secondary MCL: 50 µg/L · 8% of limit
DetectedUCMR 4 Data
Vanadium
Inorganic
Detected
0.33 µg/L
EPA Short-term HA: 21 µg/L · 2% of limit
DetectedUCMR 3 Data
PFAS Testing

Forever chemicals overview

National PFAS report →
30
Compounds tested
0
Detected
0
Exceed EPA MCL
Compliance Record

Violation summary

60
Total violations
21
Health-based
19
Active / unresolved
Oct 2022
Most recent violation
Compliance Record

Violations & advisories

60 Total
19 Active
21 Health-based
41 Resolved
10 SNC
Violations by category
Stage 2 Disinfectants and Disinfection Byproducts Rule
13
Consumer Confidence Rule
10
Inorganic Chemicals
10
Stage 1 Disinfectants and Disinfection Byproducts Rule
8
Public Notice Rule and Revised PN Rule
5
Oct 2022 Active
Public Notice
Other Violation 0
Jul 2022 Active
Consumer Confidence Rule
Other Violation 0
Nov 2021 Active
Public Notice
Other Violation 0
Jul 2021 Active
Consumer Confidence Rule
Other Violation 0
Jul 2019 Active
Consumer Confidence Rule
Other Violation 0
Sep 2018 Active
Public Notice
Other Violation 0
Feb 2018 Active
Public Notice
Other Violation 0
Sep 2017 Active
Revised Total Coliform Rule
Treatment Technique
Health-Based Health 0
Jul 2016 Active
Consumer Confidence Rule
Other Violation 0
Dec 2015 Active
Public Notice
Other Violation 0
Oct 2014 Active
Total Haloacetic Acids (HAA5)
Monitoring & Reporting
Monitoring & Reporting 0
Oct 2014 Active
TTHM
Monitoring & Reporting
Monitoring & Reporting 0
Jul 2014 Active
Consumer Confidence Rule
Other Violation 0
Jul 2013 Active
Consumer Confidence Rule
Other Violation 0
Jul 2007 Active
Consumer Confidence Rule
Other Violation 0
Oct 2005 Active
Consumer Confidence Rule
Other Violation 0
Jul 2003 Active
Consumer Confidence Rule
Other Violation 0
Jul 2003 Active
Consumer Confidence Rule
Other Violation 0
Active
Compliance Violation
Monitoring 0
Oct 2021 Resolved
Total Haloacetic Acids (HAA5)
Max Contaminant Level
SNC Health Resolved Dec 2021
Showing 20 of 60 violations
Industrial pollution

Top industrial polluters within 10 miles of Albany

Industrial polluters nearby

Reported releases to surface water by facilities near Albany, ranked by pounds discharged annually.

Total reported releases to surface water: 1 lbs

FacilityTop chemicalTo surface water (lbs/yr)Distance
SUN POOLS INC.
Plastics and Rubber · NA
ALBANY, KY42602
Styrene14.6 mi
KEYSTONE FOODS
Food · TYSON FOODS INC
ALBANY, KY42602
5.2 mi
COBB-VANTRESS INC - FEED MILL
Food · TYSON FOODS INC
ALBANY, KY42602
1.6 mi

Source: EPA Toxic Release Inventory (TRI) 2023

Environmental Risk

Drought conditions

D2 — severe drought

Clinton County is currently in D2 (severe drought) per the U.S. Drought Monitor (week of May 5, 2026). Drought can elevate disinfection-byproduct (TTHM/HAA5) levels and taste/odor issues as utilities draw from lower reservoirs.

4
Weeks at D2+ (current streak)
13.3%
Months in D2+ (last 30y)
4
Weeks at D2+ (last 5y)

Source: U.S. Drought Monitor, updated weekly by NDMC, USDA, and NOAA.

Environmental Risk

Flood & disaster history

1
Declared disasters
Sep 2005
Most recent
Hurricane
Most common type

Clinton County has experienced 1 federally declared disaster since 2005. Flooding and severe weather can compromise water treatment infrastructure and introduce contaminants into drinking water supplies.

Sep 2005
HURRICANE KATRINA
Hurricane FEMA #3231

Full contaminants report

Contaminant Detected Level EPA Limit Unit Category Status
Lead (90th percentile) 0.0 15 ppb Inorganic Safe
11Cl-PF3OUdS ND HI µg/L PFAS Not Detected
4:2 FTS ND HI µg/L PFAS Not Detected
6:2 FTS ND HI µg/L PFAS Not Detected
8:2 FTS ND HI µg/L PFAS Not Detected
9Cl-PF3ONS ND HI µg/L PFAS Not Detected
ADONA ND HI µg/L PFAS Not Detected
HFPO-DA ND 0.01 µg/L PFAS Not Detected
lithium ND HI µg/L PFAS Not Detected
NEtFOSAA ND HI µg/L PFAS Not Detected
NFDHA ND HI µg/L PFAS Not Detected
NMeFOSAA ND HI µg/L PFAS Not Detected
PFBA ND HI µg/L PFAS Not Detected
PFBS ND HI µg/L PFAS Not Detected
PFDA ND HI µg/L PFAS Not Detected
PFDoA ND HI µg/L PFAS Not Detected
PFEESA ND HI µg/L PFAS Not Detected
PFHpA ND HI µg/L PFAS Not Detected
PFHpS ND HI µg/L PFAS Not Detected
PFHxA ND HI µg/L PFAS Not Detected
PFHxS ND HI µg/L PFAS Not Detected
PFMBA ND HI µg/L PFAS Not Detected
PFMPA ND HI µg/L PFAS Not Detected
PFNA ND HI µg/L PFAS Not Detected
PFOA ND 0.004 µg/L PFAS Not Detected
PFOS ND 0.004 µg/L PFAS Not Detected
PFPeA ND HI µg/L PFAS Not Detected
PFPeS ND HI µg/L PFAS Not Detected
PFTA ND HI µg/L PFAS Not Detected
PFTrDA ND HI µg/L PFAS Not Detected
PFUnA ND HI µg/L PFAS Not Detected
Data source: EPA SDWIS, UCMR 5, local utility CCR.

Lead level trend (90th percentile)

EPA action level: 15 ppb
Lead has decreased by 4.0 ppb from 1992 (4.0 ppb) to 2025 (0.0 ppb).
Infrastructure

Water source & infrastructure

Primary Source
Surface Water
Operator
Local Government
Population Served
9,042
Water Systems
1
Water Source

Where Albany's water comes from

Surface Water

Albany's drinking water comes primarily from surface water sources such as rivers, lakes, or reservoirs.

Surface water systems require multi-stage treatment including coagulation, sedimentation, filtration, and disinfection to meet EPA Safe Drinking Water Act standards.

These sources can be impacted by seasonal changes, stormwater runoff, upstream agriculture, and industrial discharge.

The system is operated by local government ownership and serves approximately 9,042 people through 1 water system.

Local Hydrology

Water bodies near Albany

Albany is located near 1 notable water body. As a surface water system, these water bodies may directly influence the city's drinking water supply.

Wolf River
river
Infrastructure

Water systems serving Albany

System Name PWSID Population Source
ALBANY WATER WORKS KY0270003 9,042 SW
Regional Comparison

How Albany compares

Full Kentucky rankings →

Albany's score of 72.8/100 is below the average of 80/100 among major Kentucky cities. It outscores 1 of 10 nearby cities. 9 of 10 nearby cities score higher.

Albany (this city)
72.8
Louisville
82.2
Ft. Thomas
86.8
Owensboro
85.1
Kentucky avg
80
City Profile

About Albany, KY

Wikipedia →

Albany is a home rule-class city in Clinton County, Kentucky, in the United States. The population was 1,760 as of the 2020 census. It is the county seat of Clinton County. It is located on U.S. Route 127, about 6 miles (10 km) north of the Tennessee border.

Economic Profile
$39,167
Median Income
$96,117
Median Home Value
$560/mo
Median Rent
5.6%
Unemployment
Community
44.2
Median Age
384
People / sq mi
18.7%
College Educated
45.4%
Homeownership
Share this reportHelp others learn about their water quality
WhatsAppXFacebookLinkedInEmail

Frequently asked questions

Is Albany, KY tap water safe to drink?

Albany's water quality earned a grade of B- (72.8/100). Some concerns have been identified. Consider a water filter for an extra layer of protection. The city ranks #192 out of 246 cities tested in Kentucky.

What contaminants are in Albany's water?

Lead was measured at 0.0 ppb (90th percentile). No PFAS compounds were detected. 60 violations are on record.

How is Albany's water quality grade calculated?

The grade is based on four factors: violation history (40%), lead and copper levels (25%), PFAS contamination (25%), and regulatory compliance (10%). The score is also adjusted based on how complete the available data is. See our methodology page for full details.

Do I need a water filter in Albany?

Based on current data, basic filtration should suffice for additional peace of mind.

Where does Albany's water come from?

Albany's water is sourced from Surface water. The city has 1 water system serving approximately 9,042 residents.

What health violations has Albany's water system had?

Albany has 21 health-based violations on record. The most recent violation was recorded in October 2022. Health-based violations mean the water exceeded EPA maximum contaminant levels (MCLs) for a regulated substance. 19 violations remain unresolved.

How does Albany's water compare to other cities?

Albany ranks #192 out of 246 cities in Kentucky (better than 22% of state cities) and #10222 out of 15744 cities nationally (35th percentile). The grade of B- reflects the combined assessment of violation history, lead and copper levels, PFAS contamination, and regulatory compliance.