WaterVerge

Is Williamsburg City, VA Tap Water Safe to Drink?

Graded A — but Chlorate was detected above EPA limits. Here's what's in the water and how to remove it. What to do next ↓

16K residents served 1 water system PWSID: VA3830850
Overall Score
95 / 100
Violations
None active
Last Updated
May 2026
Source
Surface water
#13 of 230 in Virginia Top 2% nationally
Local Government
High data confidence
Reviewed by WaterVerge Editorial Team · Last updated May 2026
AGRADE
Water Quality Grade
95/100
waterverge.com
A 95/100

Williamsburg City, VA — Water Quality Report

Williamsburg City's drinking water received a grade of A (95 out of 100), indicating excellent water quality. The city's 1 water system serves approximately 16,300 residents using surface water.

Lead levels were measured at 1.9 ppb (90th percentile), well within EPA limits. UCMR 5 testing detected 1 PFAS compound in the water supply.

The system has 11 violations on record, including 0 health-based violations. All violations have been resolved.

Data last updated: May 2026 · Source: EPA SDWIS, UCMR 5
Analysis

What to know about Williamsburg City's water

Williamsburg City ranks #13 out of 230 cities in Virginia for water quality, placing it one of the best in the state.

The city draws from surface water sources, which are more susceptible to seasonal runoff and agricultural contamination, requiring extensive multi-barrier treatment including coagulation, filtration, and disinfection.

PFAS compounds were detected in testing, though levels remain within current EPA limits. Residents seeking extra precaution may consider an activated carbon or reverse osmosis filter.

Haloacetic acid (HAA5) levels were elevated at 40.3 µg/L in UCMR 4 testing, though below the 60 µg/L EPA limit. Activated carbon filtration can help reduce these disinfection byproducts.

Hexavalent chromium (chromium-6) was detected at 0.11 µg/L in UCMR 3 testing. While below California's 10 µg/L limit and with no federal MCL set, residents sensitive to this contaminant may consider reverse osmosis filtration.

Quality Breakdown

Water quality score

See methodology →
95 out of 100 Grade A
A: 90-100
B: 74-89
C: 60-73
F: <50
How is this calculated?
Violations
44.5/45
A
Historical violation record including health-based and monitoring violations.
Lead & Copper
20/20
A
Lead at 1.9 ppb (90th percentile).
Contaminants
16.4/20
B
1 PFAS compound detected.
Compliance
10/10
A
Monitoring and reporting compliance with EPA regulations.
Source Risk
4/5
B
Water source: Surface water.
Water Safety

Is Williamsburg City, VA water safe to drink?

Generally Safe

Based on EPA testing data, Williamsburg City's tap water is generally safe to drink. The water system earned a grade of A (95/100), meeting federal drinking water standards across key contaminant categories. The city's 1 water system serves approximately 16,300 residents using surface water (rivers, lakes, or reservoirs).

None
Violations
1.9 ppb
Lead (90th %ile)
1 compound
PFAS Detected

Recent water quality updates for Williamsburg City

A timeline of significant water quality events, violations, and data updates.

PFAS
1 PFAS "forever chemical" compound detected

Detected at levels within current EPA limits. PFAS persist indefinitely in the environment.

Update
Water quality data updated

Latest EPA compliance and testing data incorporated into Williamsburg City's water quality assessment. Grade: A (95/100).

Violation
11 drinking water violations recorded

Contaminants: Chromium, Selenium, BHC-GAMMA.

Key contaminant findings

Based on the most recent EPA sampling data for Williamsburg City's water supply.

Lead Within Limits
Detected: 1.9 ppb Limit: 15 ppb (EPA Action Level)

Well within EPA limits.

PFAS (1 compound) Elevated
Detected: Highest: PFHxS at 0.0031 µg/L Limit: 0.004 µg/L (EPA MCL)

Detected but within current EPA limits. PFAS do not break down in the environment and can accumulate in the body over time. An activated carbon filter can reduce exposure.

HAA5 (Disinfection Byproducts) Elevated
Detected: 40.3 µg/L Limit: 60 µg/L (EPA MCL)

Elevated disinfection byproduct levels. These form when chlorine interacts with organic matter during water treatment.

Violation history

Williamsburg City's water system has 11 total violations on record, including 0 health-based violations. All violations have been resolved.

MR
Most recent violations:
Jun 1980 Chromium Resolved
Jun 1980 Selenium Resolved
Jun 1980 BHC-GAMMA Resolved
Jun 1980 Mercury Resolved
Jun 1980 Toxaphene Resolved

Where does Williamsburg City's water come from?

Williamsburg City's drinking water comes from surface water (rivers, lakes, or reservoirs), supplied by 1 water system serving approximately 16,300 people. Surface water sources are more susceptible to contamination from runoff, industrial discharge, and algal blooms, requiring extensive treatment. Nearby water bodies include James River (stream).

What Williamsburg City residents can do

Request your utility's CCR

Your water utility is required to publish an annual Consumer Confidence Report (CCR) with detailed testing results. Ask for the latest copy or check your utility's website.

Data: EPA SDWIS, UCMR 5 (PFAS), FEMA, NOAA. Last updated May 2026.

Contaminant Alerts

Top contaminants to know

View all ↓
Lead (90th percentile)
Inorganic / Heavy Metal
Safe
1.9 ppb
EPA Action Level: 15 ppb · 13% of limit
Safe Level
PFHxS
PFAS / Forever Chemical
Near MCL
0.0031 µg/L
EPA MCL: 0.004 µg/L · 77% of limit
Detected
HAA5 (Disinfection Byproducts)
Disinfection Byproduct
Near MCL
40.3 µg/L
EPA MCL: 60 µg/L · 67% of limit
ElevatedUCMR 4 DataHAA6Br: 7.6 µg/LHAA9: 47.5 µg/L
Chromium-6 (Hexavalent Chromium)
Inorganic
Detected
0.11 µg/L
CA MCL (no federal MCL): 10 µg/L · 1% of limit
DetectedUCMR 3 Data
Strontium
Inorganic
Detected
235.4 µg/L
EPA Health Ref Level: 1,500 µg/L · 16% of limit
DetectedUCMR 3 Data
Manganese
Inorganic
Detected
1.8 µg/L
EPA Secondary MCL: 50 µg/L · 4% of limit
DetectedUCMR 4 Data
Vanadium
Inorganic
Detected
0.70 µg/L
EPA Short-term HA: 21 µg/L · 3% of limit
DetectedUCMR 3 Data
Chlorate
Disinfection Byproduct
Over HA
590.0 µg/L
EPA Lifetime HA: 210 µg/L · +20% over limit
Over Health AdvisoryUCMR 3 Data
Molybdenum
Inorganic
Detected
1.20 µg/L
EPA Lifetime HA: 40 µg/L · 3% of limit
DetectedUCMR 3 Data
PFAS Testing

Forever chemicals overview

National PFAS report →
30
Compounds tested
1
Detected
0
Exceed EPA MCL
Compliance Record

Violation summary

11
Total violations
0
Health-based
0
Active / unresolved
Jun 1980
Most recent violation
Compliance Record

Violations & advisories

11 Total
0 Active
0 Health-based
11 Resolved
Violations by category
Inorganic Chemicals
6
Synthetic Organic Chemicals
4
Arsenic Rule
1
Jun 1980 Resolved
Chromium
Monitoring & Reporting
Monitoring & Reporting Resolved Jun 1981
Jun 1980 Resolved
Selenium
Monitoring & Reporting
Monitoring & Reporting Resolved Jun 1981
Jun 1980 Resolved
BHC-GAMMA
Monitoring & Reporting
Monitoring & Reporting Resolved Jun 1981
Jun 1980 Resolved
Mercury
Monitoring & Reporting
Monitoring & Reporting Resolved Jun 1981
Jun 1980 Resolved
Toxaphene
Monitoring & Reporting
Monitoring & Reporting Resolved Jun 1981
Jun 1980 Resolved
Endrin
Monitoring & Reporting
Monitoring & Reporting Resolved Jun 1981
Jun 1980 Resolved
Fluoride
Monitoring & Reporting
Monitoring & Reporting Resolved Jun 1981
Jun 1980 Resolved
Arsenic
Monitoring & Reporting
Monitoring & Reporting Resolved Jun 1981
Jun 1980 Resolved
Barium
Monitoring & Reporting
Monitoring & Reporting Resolved Jun 1981
Jun 1980 Resolved
Methoxychlor
Monitoring & Reporting
Monitoring & Reporting Resolved Jun 1981
Jun 1980 Resolved
Cadmium
Monitoring & Reporting
Monitoring & Reporting Resolved Jun 1981

Recommended water filters

Based on contaminants detected in Williamsburg City's water supply, we recommend the following filter types.

🧪
For PFAS
Reverse Osmosis or Activated Carbon Block
1 PFAS compound detected

Full contaminants report

Contaminant Detected Level EPA Limit Unit Category Status
Lead (90th percentile) 1.9 15 ppb Inorganic Safe
11Cl-PF3OUdS ND HI µg/L PFAS Not Detected
4:2 FTS ND HI µg/L PFAS Not Detected
6:2 FTS ND HI µg/L PFAS Not Detected
8:2 FTS ND HI µg/L PFAS Not Detected
9Cl-PF3ONS ND HI µg/L PFAS Not Detected
ADONA ND HI µg/L PFAS Not Detected
HFPO-DA ND 0.01 µg/L PFAS Not Detected
lithium ND HI µg/L PFAS Not Detected
NEtFOSAA ND HI µg/L PFAS Not Detected
NFDHA ND HI µg/L PFAS Not Detected
NMeFOSAA ND HI µg/L PFAS Not Detected
PFBA ND HI µg/L PFAS Not Detected
PFBS ND HI µg/L PFAS Not Detected
PFDA ND HI µg/L PFAS Not Detected
PFDoA ND HI µg/L PFAS Not Detected
PFEESA ND HI µg/L PFAS Not Detected
PFHpA ND HI µg/L PFAS Not Detected
PFHpS ND HI µg/L PFAS Not Detected
PFHxA ND HI µg/L PFAS Not Detected
PFHxS 0.003 HI µg/L PFAS Detected
PFMBA ND HI µg/L PFAS Not Detected
PFMPA ND HI µg/L PFAS Not Detected
PFNA ND HI µg/L PFAS Not Detected
PFOA ND 0.004 µg/L PFAS Not Detected
PFOS ND 0.004 µg/L PFAS Not Detected
PFPeA ND HI µg/L PFAS Not Detected
PFPeS ND HI µg/L PFAS Not Detected
PFTA ND HI µg/L PFAS Not Detected
PFTrDA ND HI µg/L PFAS Not Detected
PFUnA ND HI µg/L PFAS Not Detected
Data source: EPA SDWIS, UCMR 5, local utility CCR.

Lead level trend (90th percentile)

EPA action level: 15 ppb
Lead has decreased by 1.1 ppb from 1992 (3.0 ppb) to 2023 (1.9 ppb).
Contaminant Rankings

See how Williamsburg City compares by contaminant

Explore where Williamsburg City ranks among all Virginia cities for specific contaminants.

Infrastructure

Water source & infrastructure

Primary Source
Surface Water
Operator
Local Government
Population Served
16,300
Water Systems
1
Water Source

Where Williamsburg City's water comes from

Surface Water

Williamsburg City's drinking water comes primarily from surface water sources such as rivers, lakes, or reservoirs.

Surface water systems require multi-stage treatment including coagulation, sedimentation, filtration, and disinfection to meet EPA Safe Drinking Water Act standards.

These sources can be impacted by seasonal changes, stormwater runoff, upstream agriculture, and industrial discharge.

The system is operated by local government ownership and serves approximately 16,300 people through 1 water system.

Local Hydrology

Water bodies near Williamsburg City

Williamsburg City is located near 1 notable water body. As a surface water system, these water bodies may directly influence the city's drinking water supply.

James River
stream
Infrastructure

Water systems serving Williamsburg City

System Name PWSID Population Source
WILLIAMSBURG, CITY OF VA3830850 16,300 SW
Regional Comparison

How Williamsburg City compares

Full Virginia rankings →

Williamsburg City's score of 95/100 is above the average of 85/100 among major Virginia cities. It outscores 10 of 10 nearby cities.

Williamsburg City (this city)
95
Herndon
75.5
Ashburn
87
Virginia avg
85
City Profile

About Williamsburg City, VA

Wikipedia →

Williamsburg is an independent city in the U.S. state of Virginia. It had a population of 15,425 at the 2020 census. Located on the Virginia Peninsula, Williamsburg is in the northern part of the Hampton Roads metropolitan area. It is bordered by James City County on the west and south and York County on the east.

Economic Profile
$66,815
Median Income
$386,620
Median Home Value
$1,274/mo
Median Rent
6%
Unemployment
Community
24.6
Median Age
669
People / sq mi
50.6%
College Educated
50.9%
Homeownership
Share this reportHelp others learn about their water quality
WhatsAppXFacebookLinkedInEmail

Frequently asked questions

Is Williamsburg City, VA tap water safe to drink?

Williamsburg City's water quality earned a grade of A (95/100). The water generally meets EPA standards and is considered safe for consumption. The city ranks #13 out of 230 cities tested in Virginia.

What contaminants are in Williamsburg City's water?

Lead was measured at 1.9 ppb (90th percentile). 1 PFAS compound was detected. 11 violations are on record.

How is Williamsburg City's water quality grade calculated?

The grade is based on four factors: violation history (40%), lead and copper levels (25%), PFAS contamination (25%), and regulatory compliance (10%). The score is also adjusted based on how complete the available data is. See our methodology page for full details.

Do I need a water filter in Williamsburg City?

PFAS compounds have been detected. A filter with activated carbon can help reduce exposure.

Where does Williamsburg City's water come from?

Williamsburg City's water is sourced from Surface water. The city has 1 water system serving approximately 16,300 residents.

How does Williamsburg City's water compare to other cities?

Williamsburg City ranks #13 out of 230 cities in Virginia (better than 94% of state cities) and #361 out of 15744 cities nationally (98th percentile). The grade of A reflects the combined assessment of violation history, lead and copper levels, PFAS contamination, and regulatory compliance.