WaterVerge

Is Wellington, KS Tap Water Safe to Drink?

Graded C-, with 37 unresolved violations on record. See what was cited — and what it means for your tap. What to do next ↓

9K residents served 4 water systems PWSID: KS2019119
Overall Score
56 / 100
Violations
37 active
Last Updated
May 2026
Source
Surface water
#286 of 323 in Kansas Top 79% nationally
Local Government
High data confidence
Reviewed by WaterVerge Editorial Team · Last updated May 2026
C-GRADE
Water Quality Grade
56/100
waterverge.com
C- 56/100

Wellington, KS — Water Quality Report

Wellington's drinking water received a grade of C- (56 out of 100), indicating poor water quality. The city's 4 water systems serve approximately 8,514 residents using surface water.

Lead levels were measured at 0.8 ppb (90th percentile), well within EPA limits. UCMR 5 testing detected 2 PFAS compounds in the water supply.

The system has 149 violations on record, including 32 health-based violations. 37 remain unresolved.

Data last updated: May 2026 · Source: EPA SDWIS, UCMR 5
Analysis

What to know about Wellington's water

Wellington ranks #286 out of 323 cities in Kansas for water quality, placing it among the lowest-rated in the state.

The city draws from surface water sources, which are more susceptible to seasonal runoff and agricultural contamination, requiring extensive multi-barrier treatment including coagulation, filtration, and disinfection.

PFAS compounds were detected in testing, though levels remain within current EPA limits. Residents seeking extra precaution may consider an activated carbon or reverse osmosis filter.

Haloacetic acid (HAA5) levels were elevated at 39.8 µg/L in UCMR 4 testing, though below the 60 µg/L EPA limit. Activated carbon filtration can help reduce these disinfection byproducts.

The system has seen 14 violations in the past five years, suggesting a pattern of compliance challenges that residents should monitor closely.

Quality Breakdown

Water quality score

See methodology →
56 out of 100 Grade C-
A: 90-100
B: 74-89
C: 60-73
F: <50
How is this calculated?
Violations
9/45
F
Historical violation record including health-based and monitoring violations.
Lead & Copper
20/20
A
Lead at 0.8 ppb (90th percentile).
Contaminants
18.1/20
A
2 PFAS compounds detected.
Compliance
5/10
D
Monitoring and reporting compliance with EPA regulations.
Source Risk
4/5
B
Water source: Surface water.
Water Safety

Is Wellington, KS water safe to drink?

Concerns Identified

Wellington's drinking water has significant quality concerns based on EPA testing data. With a grade of C- (56/100), the system has issues across multiple categories. A water filter is recommended for all residents. The city's 4 water systems serve approximately 8,514 residents using surface water (rivers, lakes, or reservoirs).

37
Active Violations
0.8 ppb
Lead (90th %ile)
2 compounds
PFAS Detected
3 events
Disaster History

Recent water quality updates for Wellington

A timeline of significant water quality events, violations, and data updates.

PFAS
2 PFAS "forever chemical" compounds detected

Detected at levels within current EPA limits. PFAS persist indefinitely in the environment.

Update
Water quality data updated

Latest EPA compliance and testing data incorporated into Wellington's water quality assessment. Grade: C- (56/100).

Violation
5 drinking water violations recorded

Contaminants: Lead and Copper Rule, Revised Total Coliform Rule, Chlorine.

Violation
4 drinking water violations recorded

Contaminants: LEAD AND COPPER RULE REVISIONS, Chlorine, Revised Total Coliform Rule.

Violation
2 drinking water violations recorded

Contaminants: Revised Total Coliform Rule, Chlorine.

Disaster
HURRICANE KATRINA EVACUATION

Federal disaster declaration (FEMA DR-3236). Hurricane event — may have impacted local water infrastructure.

Key contaminant findings

Based on the most recent EPA sampling data for Wellington's water supply.

Lead Within Limits
Detected: 0.8 ppb Limit: 15 ppb (EPA Action Level)

Well within EPA limits.

PFAS (2 compounds) Elevated
Detected: Highest: lithium at 12.4000 µg/L Limit: 0.004 µg/L (EPA MCL)

Detected but within current EPA limits. PFAS do not break down in the environment and can accumulate in the body over time. An activated carbon filter can reduce exposure.

PFAS "forever chemicals" detected

UCMR 5 testing found 2 PFAS compounds in Wellington's water supply. PFAS are synthetic chemicals that persist indefinitely in the environment and the human body.

Compound Level EPA MCL Status
lithium 12.4000 µg/L 0.004 µg/L Within Limit
PFBA 0.0074 µg/L 0.004 µg/L Within Limit

Violation history

Wellington's water system has 149 total violations on record, including 32 health-based violations. 37 remain unresolved. 14 violations were issued in the last 5 years.

MRMONRPTOtherMCLTT
Most recent violations:
Jan 2025 Lead and Copper Rule Open
Jan 2025 Revised Total Coliform Rule Resolved
Jan 2025 Chlorine Resolved
Jan 2025 Lead and Copper Rule Open
Jan 2025 Lead and Copper Rule Open

Flood & environmental risk

Sumner County has experienced 3 federally declared disasters since 1973. Flooding and severe storms can overwhelm water treatment plants, cause sewage overflows, and introduce agricultural runoff, bacteria, and sediment into drinking water supplies. Local water sources include Slate C.

HURRICANE KATRINA EVACUATION
Hurricane FEMA DR-3236
SEVERE STORMS & FLOODING
Flood FEMA DR-1000
SEVERE STORMS & FLOODING
Flood FEMA DR-378

Where does Wellington's water come from?

Wellington's drinking water comes from surface water (rivers, lakes, or reservoirs), supplied by 4 water systems serving approximately 8,514 people. Surface water sources are more susceptible to contamination from runoff, industrial discharge, and algal blooms, requiring extensive treatment. Nearby water bodies include Slate C (river).

What Wellington residents can do

Install a water filter

Recommended: Activated carbon or reverse osmosis filter. This addresses the specific contaminants found in Wellington's water.

Request your utility's CCR

Your water utility is required to publish an annual Consumer Confidence Report (CCR) with detailed testing results. Ask for the latest copy or check your utility's website.

Monitor alerts during storms

Wellington's area has a history of flooding. After severe weather, watch for boil water advisories from your local utility.

Data: EPA SDWIS, UCMR 5 (PFAS), FEMA, NOAA. Last updated May 2026.

Contaminant Alerts

Top contaminants to know

View all ↓
Lead (90th percentile)
Inorganic / Heavy Metal
Safe
0.8 ppb
EPA Action Level: 15 ppb · 5% of limit
Safe Level
lithium
PFAS / Forever Chemical
Near MCL
12.4000 µg/L
EPA MCL: 0.004 µg/L · +20% over limit
Detected
HAA5 (Disinfection Byproducts)
Disinfection Byproduct
Safe
39.8 µg/L
EPA MCL: 60 µg/L · 66% of limit
Within LimitUCMR 4 DataHAA6Br: 26.4 µg/LHAA9: 58.4 µg/L
Manganese
Inorganic
Detected
13.0 µg/L
EPA Secondary MCL: 50 µg/L · 26% of limit
DetectedUCMR 4 Data
Lithium
Inorganic
Detected
12.4 µg/L
State screening level: 60 µg/L · 21% of limit
DetectedNo federal MCLUCMR 5 Data (2023–2025)
PFAS Testing

Forever chemicals overview

National PFAS report →
30
Compounds tested
2
Detected
0
Exceed EPA MCL
Compliance Record

Violation summary

149
Total violations
32
Health-based
37
Active / unresolved
Jan 2025
Most recent violation
Compliance Record

Violations & advisories

149 Total
37 Active
32 Health-based
112 Resolved
12 SNC
Violations by category
Total Coliform Rule
52
Volatile Organic Chemicals
23
Stage 1 Disinfectants and Disinfection Byproducts Rule
14
Stage 2 Disinfectants and Disinfection Byproducts Rule
12
Lead and Copper Rule
11
Jan 2025 Active
Lead and Copper Rule
Monitoring & Reporting
Monitoring & Reporting 0
Jan 2025 Active
Lead and Copper Rule
Monitoring & Reporting
Monitoring & Reporting 0
Jan 2025 Active
Lead and Copper Rule
Monitoring & Reporting
Monitoring & Reporting 0
Oct 2024 Active
LEAD AND COPPER RULE REVISIONS
Reporting
Reporting 0
Oct 2024 Active
LEAD AND COPPER RULE REVISIONS
Reporting
Reporting 0
Dec 2021 Active
Lead and Copper Rule
Monitoring & Reporting
Monitoring & Reporting 0
Dec 2021 Active
Lead and Copper Rule
Monitoring & Reporting
Monitoring & Reporting 0
May 2019 Active
Public Notice
Other Violation 0
May 2019 Active
Public Notice
Other Violation 0
Dec 2018 Active
Lead and Copper Rule
Monitoring & Reporting
Monitoring & Reporting 0
Dec 2018 Active
Public Notice
Other Violation 0
Dec 2018 Active
Public Notice
Other Violation 0
Mar 2018 Active
TTHM
Monitoring & Reporting
Monitoring & Reporting 0
Sep 2017 Active
TTHM
Monitoring & Reporting
Monitoring & Reporting 0
Sep 2017 Active
Public Notice
Other Violation 0
Dec 2016 Active
Public Notice
Other Violation 0
Oct 2015 Active
Public Notice
Other Violation 0
Oct 2015 Active
Lead and Copper Rule
Monitoring & Reporting
Monitoring & Reporting 0
Jun 2015 Active
Public Notice
Other Violation 0
Oct 2012 Active
Lead and Copper Rule
Monitoring & Reporting
Monitoring & Reporting 0
Showing 20 of 149 violations
Environmental Risk

Drought conditions

D2 — severe drought

Sumner County is currently in D2 (severe drought) per the U.S. Drought Monitor (week of May 5, 2026). Drought can elevate disinfection-byproduct (TTHM/HAA5) levels and taste/odor issues as utilities draw from lower reservoirs.

1
Weeks at D2+ (current streak)
10.7%
Months in D2+ (last 30y)
1
Weeks at D2+ (last 5y)

Source: U.S. Drought Monitor, updated weekly by NDMC, USDA, and NOAA.

Environmental Risk

Flood & disaster history

3
Declared disasters
Sep 2005
Most recent
Flood
Most common type

Sumner County has experienced 3 federally declared disasters since 1973. Flooding and severe weather can compromise water treatment infrastructure and introduce contaminants into drinking water supplies.

Sep 2005
HURRICANE KATRINA EVACUATION
Hurricane FEMA #3236
Jul 1993
SEVERE STORMS & FLOODING
Flood FEMA #1000
May 1973
SEVERE STORMS & FLOODING
Flood FEMA #378

Recommended water filters

Based on contaminants detected in Wellington's water supply, we recommend the following filter types.

🧪
For PFAS
Reverse Osmosis or Activated Carbon Block
2 PFAS compounds detected

Full contaminants report

Contaminant Detected Level EPA Limit Unit Category Status
Lead (90th percentile) 0.8 15 ppb Inorganic Safe
11Cl-PF3OUdS ND HI µg/L PFAS Not Detected
4:2 FTS ND HI µg/L PFAS Not Detected
6:2 FTS ND HI µg/L PFAS Not Detected
8:2 FTS ND HI µg/L PFAS Not Detected
9Cl-PF3ONS ND HI µg/L PFAS Not Detected
ADONA ND HI µg/L PFAS Not Detected
HFPO-DA ND 0.01 µg/L PFAS Not Detected
lithium 12.400 HI µg/L PFAS Detected
NEtFOSAA ND HI µg/L PFAS Not Detected
NFDHA ND HI µg/L PFAS Not Detected
NMeFOSAA ND HI µg/L PFAS Not Detected
PFBA 0.007 HI µg/L PFAS Detected
PFBS ND HI µg/L PFAS Not Detected
PFDA ND HI µg/L PFAS Not Detected
PFDoA ND HI µg/L PFAS Not Detected
PFEESA ND HI µg/L PFAS Not Detected
PFHpA ND HI µg/L PFAS Not Detected
PFHpS ND HI µg/L PFAS Not Detected
PFHxA ND HI µg/L PFAS Not Detected
PFHxS ND HI µg/L PFAS Not Detected
PFMBA ND HI µg/L PFAS Not Detected
PFMPA ND HI µg/L PFAS Not Detected
PFNA ND HI µg/L PFAS Not Detected
PFOA ND 0.004 µg/L PFAS Not Detected
PFOS ND 0.004 µg/L PFAS Not Detected
PFPeA ND HI µg/L PFAS Not Detected
PFPeS ND HI µg/L PFAS Not Detected
PFTA ND HI µg/L PFAS Not Detected
PFTrDA ND HI µg/L PFAS Not Detected
PFUnA ND HI µg/L PFAS Not Detected
Data source: EPA SDWIS, UCMR 5, local utility CCR.

Lead level trend (90th percentile)

EPA action level: 15 ppb
Lead has decreased by 2.0 ppb from 1992 (2.0 ppb) to 2024 (0.0 ppb).
Contaminant Rankings

See how Wellington compares by contaminant

Explore where Wellington ranks among all Kansas cities for specific contaminants.

Infrastructure

Water source & infrastructure

Primary Source
Surface Water
Operator
Local Government
Population Served
8,514
Water Systems
4
Source breakdown
Purchased Surface Water
3
Surface Water
1
Water Source

Where Wellington's water comes from

Surface Water

Wellington's drinking water comes primarily from surface water sources such as rivers, lakes, or reservoirs.

Surface water systems require multi-stage treatment including coagulation, sedimentation, filtration, and disinfection to meet EPA Safe Drinking Water Act standards.

These sources can be impacted by seasonal changes, stormwater runoff, upstream agriculture, and industrial discharge.

The system is operated by local government ownership and serves approximately 8,514 people through 4 water systems.

Local Hydrology

Water bodies near Wellington

Wellington is located near 1 notable water body. As a surface water system, these water bodies may directly influence the city's drinking water supply.

Slate C
river
Infrastructure

Water systems serving Wellington

System Name PWSID Population Source
WELLINGTON, CITY OF KS2019119 7,664 SW
SUMNER CO RWD 2 KS2019107 490 SWP
SUMNER CO RWD 1 KS2019106 280 SWP
SUMNER CO RWD 3 KS2019105 80 SWP
Regional Comparison

How Wellington compares

Full Kansas rankings →

Wellington's score of 56/100 is below the average of 62/100 among major Kansas cities. It outscores 4 of 10 nearby cities. 6 of 10 nearby cities score higher.

Wellington (this city)
56
Wichita
83.9
Olathe
79.5
Topeka
39.3
Lawrence
74.6
Kansas avg
62
City Profile

About Wellington, KS

Wikipedia →

Wellington is a city in and the county seat of Sumner County, Kansas, United States. As of the 2020 census, the population of the city was 7,715.

Economic Profile
$48,333
Median Income
$89,855
Median Home Value
$807/mo
Median Rent
5.2%
Unemployment
Community
39.9
Median Age
391
People / sq mi
19.3%
College Educated
64.4%
Homeownership
Share this reportHelp others learn about their water quality
WhatsAppXFacebookLinkedInEmail

Frequently asked questions

Is Wellington, KS tap water safe to drink?

Wellington's water quality earned a grade of C- (56/100). Significant issues have been found. A water filter is strongly recommended. The city ranks #286 out of 323 cities tested in Kansas.

What contaminants are in Wellington's water?

Lead was measured at 0.8 ppb (90th percentile). 2 PFAS compounds were detected. 149 violations are on record.

How is Wellington's water quality grade calculated?

The grade is based on four factors: violation history (40%), lead and copper levels (25%), PFAS contamination (25%), and regulatory compliance (10%). The score is also adjusted based on how complete the available data is. See our methodology page for full details.

Do I need a water filter in Wellington?

PFAS compounds have been detected. A filter with activated carbon can help reduce exposure.

Where does Wellington's water come from?

Wellington's water is sourced from Surface water. The city has 4 water systems serving approximately 8,514 residents.

What health violations has Wellington's water system had?

Wellington has 32 health-based violations on record. The most recent violation was recorded in January 2025. Health-based violations mean the water exceeded EPA maximum contaminant levels (MCLs) for a regulated substance. 37 violations remain unresolved.

How does Wellington's water compare to other cities?

Wellington ranks #286 out of 323 cities in Kansas (better than 11% of state cities) and #12492 out of 15744 cities nationally (21th percentile). The grade of C- reflects the combined assessment of violation history, lead and copper levels, PFAS contamination, and regulatory compliance.