WaterVerge

Is Ansonia, CT Tap Water Safe to Drink?

Graded B- — but Copper, PFOA and 1 more were detected above EPA limits. Here's what's in the water and how to remove it. What to do next ↓

21K residents served 4 water systems PWSID: CT1240011
Overall Score
74.8 / 100
Violations
14 active
Last Updated
May 2026
Source
Purchased surface water
#36 of 158 in Connecticut Top 62% nationally
Private
High data confidence
Reviewed by WaterVerge Editorial Team · Last updated May 2026
B-GRADE
Water Quality Grade
74.8/100
waterverge.com
B- 74.8/100

Ansonia, CT — Water Quality Report

Ansonia's drinking water received a grade of B- (74.8 out of 100), indicating fair water quality. The city's 4 water systems serve approximately 20,949 residents using purchased surface water.

Lead levels were measured at 0.0 ppb (90th percentile), well within EPA limits. UCMR 5 testing detected 6 PFAS compounds, with levels exceeding EPA maximum contaminant levels in the water supply.

The system has 35 violations on record, including 6 health-based violations. 14 remain unresolved.

Data last updated: May 2026 · Source: EPA SDWIS, UCMR 5
Analysis

What to know about Ansonia's water

Ansonia ranks #36 out of 158 cities in Connecticut for water quality, placing it above average in the state.

The city draws from surface water sources, which are more susceptible to seasonal runoff and agricultural contamination, requiring extensive multi-barrier treatment including coagulation, filtration, and disinfection.

Of particular concern: PFAS "forever chemical" levels exceed the 2024 EPA maximum contaminant levels. These synthetic compounds don't break down naturally and require specialized filtration such as reverse osmosis or granular activated carbon.

Haloacetic acid (HAA5) levels were elevated at 32.9 µg/L in UCMR 4 testing, though below the 60 µg/L EPA limit. Activated carbon filtration can help reduce these disinfection byproducts.

Hexavalent chromium (chromium-6) was detected at 0.12 µg/L in UCMR 3 testing. While below California's 10 µg/L limit and with no federal MCL set, residents sensitive to this contaminant may consider reverse osmosis filtration.

Quality Breakdown

Water quality score

See methodology →
74.8 out of 100 Grade B-
A: 90-100
B: 74-89
C: 60-73
F: <50
How is this calculated?
Violations
38.5/45
B
Historical violation record including health-based and monitoring violations.
Lead & Copper
16/20
B
Lead at 0.0 ppb (90th percentile).
Contaminants
11.3/20
D
6 PFAS compounds detected.
Compliance
5/10
D
Monitoring and reporting compliance with EPA regulations.
Source Risk
4/5
B
Water source: Purchased surface water.
Water Safety

Is Ansonia, CT water safe to drink?

Concerns Identified

Ansonia's drinking water has significant quality concerns based on EPA testing data. With a grade of B- (74.8/100), the system has issues across multiple categories. A water filter is recommended for all residents. The city's 4 water systems serve approximately 20,949 residents using surface water (rivers, lakes, or reservoirs).

14
Active Violations
0.0 ppb
Lead (90th %ile)
6 compounds
PFAS Detected

Recent water quality updates for Ansonia

A timeline of significant water quality events, violations, and data updates.

PFAS
6 PFAS "forever chemical" compounds detected

PFAS levels exceed EPA maximum contaminant levels. Reverse osmosis or activated carbon filtration recommended.

Update
Water quality data updated

Latest EPA compliance and testing data incorporated into Ansonia's water quality assessment. Grade: B- (74.8/100).

Violation
2 drinking water violations recorded

Contaminants: Lead and Copper Rule.

Violation
1 drinking water violation recorded

Contaminants: Lead and Copper Rule.

Violation
1 drinking water violation recorded

Contaminants: Chlorine.

Key contaminant findings

Based on the most recent EPA sampling data for Ansonia's water supply.

Lead Within Limits
Detected: 0.0 ppb Limit: 15 ppb (EPA Action Level)

Well within EPA limits.

Copper Exceeds Limit
Detected: 1.47 mg/L Limit: 1.3 mg/L (EPA Action Level)

Exceeds EPA action level. Copper can leach from household plumbing — flush taps for 30 seconds before drinking.

PFAS (6 compounds) Exceeds Limit
Detected: Highest: PFOA at 0.0081 µg/L Limit: 0.004 µg/L (EPA MCL)

PFAS "forever chemicals" exceed EPA maximum contaminant levels. Reverse osmosis or granular activated carbon filtration strongly recommended.

PFAS "forever chemicals" detected

UCMR 5 testing found 6 PFAS compounds in Ansonia's water supply. PFAS are synthetic chemicals that persist indefinitely in the environment and the human body.

Compound Level EPA MCL Status
PFOA 0.0081 µg/L 0.004 µg/L Over MCL
PFOS 0.0069 µg/L 0.004 µg/L Over MCL
PFPeA 0.0068 µg/L 0.004 µg/L Within Limit
PFHxA 0.0049 µg/L 0.004 µg/L Within Limit

Violation history

Ansonia's water system has 35 total violations on record, including 6 health-based violations. 14 remain unresolved. 2 violations were issued in the last 5 years.

MROtherMCL
Most recent violations:
Dec 2021 Lead and Copper Rule Open
Dec 2021 Lead and Copper Rule Open
Dec 2019 Lead and Copper Rule Open
Oct 2018 Chlorine Resolved
Jul 2018 Consumer Confidence Rule Open

Where does Ansonia's water come from?

Ansonia's drinking water comes from surface water (rivers, lakes, or reservoirs), supplied by 4 water systems serving approximately 20,949 people. Surface water sources are more susceptible to contamination from runoff, industrial discharge, and algal blooms, requiring extensive treatment. Nearby water bodies include Housatonic River (river), Naugatuck River (river), Rooster River (river).

What Ansonia residents can do

Install a water filter

Recommended: Reverse osmosis system. This addresses the specific contaminants found in Ansonia's water.

Request your utility's CCR

Your water utility is required to publish an annual Consumer Confidence Report (CCR) with detailed testing results. Ask for the latest copy or check your utility's website.

Data: EPA SDWIS, UCMR 5 (PFAS), FEMA, NOAA. Last updated May 2026.

Contaminant Alerts

Top contaminants to know

View all ↓
Lead (90th percentile)
Inorganic / Heavy Metal
Safe
0.0 ppb
EPA Action Level: 15 ppb · 0% of limit
Safe Level
Copper (90th percentile)
Inorganic
Over Limit
1.47 mg/L
EPA Action Level: 1.3 mg/L · +13% over limit
Exceeds Limit
PFOA
PFAS / Forever Chemical
Over MCL
0.0081 µg/L
EPA MCL: 0.004 µg/L · +20% over limit
Exceeds MCL
HAA5 (Disinfection Byproducts)
Disinfection Byproduct
Safe
32.9 µg/L
EPA MCL: 60 µg/L · 55% of limit
Within LimitUCMR 4 DataHAA6Br: 7.6 µg/LHAA9: 39.9 µg/L
Chromium-6 (Hexavalent Chromium)
Inorganic
Detected
0.12 µg/L
CA MCL (no federal MCL): 10 µg/L · 1% of limit
DetectedUCMR 3 Data
Strontium
Inorganic
Detected
110.0 µg/L
EPA Health Ref Level: 1,500 µg/L · 7% of limit
DetectedUCMR 3 Data
Manganese
Inorganic
Over SMCL
51.2 µg/L
EPA Secondary MCL: 50 µg/L · +2% over limit
Over SMCLUCMR 4 Data
Vanadium
Inorganic
Detected
0.77 µg/L
EPA Short-term HA: 21 µg/L · 4% of limit
DetectedUCMR 3 Data
Chlorate
Disinfection Byproduct
Elevated
190.0 µg/L
EPA Lifetime HA: 210 µg/L · 90% of limit
DetectedUCMR 3 Data
PFAS Testing

Forever chemicals overview

National PFAS report →
30
Compounds tested
6
Detected
2
Exceed EPA MCL
3.75
Hazard Index
PFOS max: 0.0069 µg/L PFOA max: 0.0081 µg/L
Compliance Record

Violation summary

35
Total violations
6
Health-based
14
Active / unresolved
Dec 2021
Most recent violation
Compliance Record

Violations & advisories

35 Total
14 Active
6 Health-based
21 Resolved
Violations by category
Total Coliform Rule
12
Lead and Copper Rule
6
Consumer Confidence Rule
6
Radionuclides and Revised Rad Rule
6
Stage 1 Disinfectants and Disinfection Byproducts Rule
3
Dec 2021 Active
Lead and Copper Rule
Monitoring & Reporting
Monitoring & Reporting 0
Dec 2021 Active
Lead and Copper Rule
Monitoring & Reporting
Monitoring & Reporting 0
Dec 2019 Active
Lead and Copper Rule
Monitoring & Reporting
Monitoring & Reporting 0
Jul 2018 Active
Consumer Confidence Rule
Other Violation 0
Jul 2018 Active
Consumer Confidence Rule
Other Violation 0
Sep 2017 Active
Lead and Copper Rule
Monitoring & Reporting
Monitoring & Reporting 0
Aug 2017 Active
Consumer Confidence Rule
Other Violation 0
Jul 2017 Active
Consumer Confidence Rule
Other Violation 0
Jan 2017 Active
Lead and Copper Rule
Monitoring & Reporting
Monitoring & Reporting 0
Jul 2006 Active
Consumer Confidence Rule
Other Violation 0
Jul 2006 Active
Consumer Confidence Rule
Other Violation 0
Jan 1994 Active
Lead and Copper Rule
Monitoring & Reporting
Monitoring & Reporting 0
Active
Compliance Violation
Monitoring 0
Active
Compliance Violation
Monitoring 0
Oct 2018 Resolved
Chlorine
Monitoring & Reporting
Monitoring & Reporting Resolved Dec 2018
Jul 2018 Resolved
Chlorine
Monitoring & Reporting
Monitoring & Reporting Resolved Sep 2018
Jul 2016 Resolved
Chlorine
Monitoring & Reporting
Monitoring & Reporting Resolved Sep 2016
Oct 2009 Resolved
Combined Uranium
Monitoring & Reporting
Monitoring & Reporting Resolved Dec 2009
Oct 2009 Resolved
Combined Radium (-226 and -228)
Monitoring & Reporting
Monitoring & Reporting Resolved Dec 2009
Oct 2009 Resolved
Gross Alpha, Excl. Radon and U
Monitoring & Reporting
Monitoring & Reporting Resolved Dec 2009
Showing 20 of 35 violations
Industrial pollution

Top industrial polluters within 10 miles of Ansonia

Industrial polluters nearby

Reported releases to surface water by facilities near Ansonia, ranked by pounds discharged annually.

Total reported releases to surface water: 86 lbs

FacilityTop chemicalTo surface water (lbs/yr)Distance
MARMON UTILITY LLC
Electrical Equipment · BERKSHIRE HATHAWAY INC
SEYMOUR, CT06483
Zinc compounds643.6 mi
SARGENT MANUFACTURING CO
Fabricated Metals · ASSA ABLOY INC
NEW HAVEN, CT06511
Lead148.5 mi
TALALAY GLOBAL
Plastics and Rubber · NA
SHELTON, CT06484
Zinc compounds63.9 mi
GATEWAY TERMINAL LLC
Petroleum Bulk Terminals · ENSTRUCTURE LLC
NEW HAVEN, CT06512
Naphthalene19.4 mi
ANCO ENGINEERING INC.
Fabricated Metals · NA
SHELTON, CT06484
Lead14.4 mi

Source: EPA Toxic Release Inventory (TRI) 2023

Site context

Superfund sites within 10 miles of Ansonia

Superfund sites nearby

Federally tracked hazardous-waste sites on the EPA National Priorities List. Proximity does not necessarily indicate tap-water contamination — the connection depends on hydrology and treatment.

Source: EPA Superfund National Priorities List

Recommended water filters

Based on contaminants detected in Ansonia's water supply, we recommend the following filter types.

🧪
For PFAS
Reverse Osmosis or Activated Carbon Block
PFAS compounds exceed EPA maximum contaminant levels
🔧
For Copper
Reverse Osmosis or KDF Filter
Copper exceeds the EPA action level of 1.3 mg/L

Full contaminants report

Contaminant Detected Level EPA Limit Unit Category Status
Lead (90th percentile) 0.0 15 ppb Inorganic Safe
Copper (90th percentile) 1.47 1.3 mg/L Inorganic Over Limit
11Cl-PF3OUdS ND HI µg/L PFAS Not Detected
4:2 FTS ND HI µg/L PFAS Not Detected
6:2 FTS ND HI µg/L PFAS Not Detected
8:2 FTS ND HI µg/L PFAS Not Detected
9Cl-PF3ONS ND HI µg/L PFAS Not Detected
ADONA ND HI µg/L PFAS Not Detected
HFPO-DA ND 0.01 µg/L PFAS Not Detected
lithium ND HI µg/L PFAS Not Detected
NEtFOSAA ND HI µg/L PFAS Not Detected
NFDHA ND HI µg/L PFAS Not Detected
NMeFOSAA ND HI µg/L PFAS Not Detected
PFBA ND HI µg/L PFAS Not Detected
PFBS 0.005 HI µg/L PFAS Detected
PFDA ND HI µg/L PFAS Not Detected
PFDoA ND HI µg/L PFAS Not Detected
PFEESA ND HI µg/L PFAS Not Detected
PFHpA 0.004 HI µg/L PFAS Detected
PFHpS ND HI µg/L PFAS Not Detected
PFHxA 0.005 HI µg/L PFAS Detected
PFHxS ND HI µg/L PFAS Not Detected
PFMBA ND HI µg/L PFAS Not Detected
PFMPA ND HI µg/L PFAS Not Detected
PFNA ND HI µg/L PFAS Not Detected
PFOA 0.008 0.004 µg/L PFAS Over MCL
PFOS 0.007 0.004 µg/L PFAS Over MCL
PFPeA 0.007 HI µg/L PFAS Detected
PFPeS ND HI µg/L PFAS Not Detected
PFTA ND HI µg/L PFAS Not Detected
PFTrDA ND HI µg/L PFAS Not Detected
PFUnA ND HI µg/L PFAS Not Detected
Data source: EPA SDWIS, UCMR 5, local utility CCR.

Lead level trend (90th percentile)

EPA action level: 15 ppb
Lead has decreased by 10.9 ppb from 1992 (12.0 ppb) to 2025 (1.1 ppb).

Copper level (90th percentile)

Latest reading: 1.470 mg/L (2016)

EPA action level: 1.3 mg/L

Infrastructure

Water source & infrastructure

Primary Source
Purchased Surface Water
Operator
Private
Population Served
20,949
Water Systems
4
Source breakdown
Purchased Surface Water
3
Purchased Groundwater
1
Water Source

Where Ansonia's water comes from

Purchased Surface Water

Ansonia's drinking water comes primarily from surface water sources such as rivers, lakes, or reservoirs.

Surface water systems require multi-stage treatment including coagulation, sedimentation, filtration, and disinfection to meet EPA Safe Drinking Water Act standards.

These sources can be impacted by seasonal changes, stormwater runoff, upstream agriculture, and industrial discharge.

The system is operated by private ownership and serves approximately 20,949 people through 4 water systems.

Local Hydrology

Water bodies near Ansonia

Ansonia is located near 3 notable water bodies. As a surface water system, these water bodies may directly influence the city's drinking water supply.

Housatonic River
river
Naugatuck River
river
Rooster River
river
Infrastructure

Water systems serving Ansonia

System Name PWSID Population Source
AQUARION-VALLEY CT1240011 13,080 SWP
HERITAGE WATER COMPANY CT1300021 7,300 SWP
AQUARION-OXFORD TOWNE CENTER CT1085061 449 GWP
AQUARION-HAWKSTONE CT1080011 120 SWP
Regional Comparison

How Ansonia compares

Full Connecticut rankings →

Ansonia's score of 74.8/100 is above the average of 47/100 among major Connecticut cities. It outscores 10 of 10 nearby cities.

Ansonia (this city)
74.8
Ansonia
49.4
Ansonia
33.5
Ansonia
34.5
Berlin
41
Connecticut avg
47
City Profile

About Ansonia, CT

Wikipedia →

Shelton is a city in Fairfield County, Connecticut, United States. The population was 40,869 at the 2020 United States Census. The city is part of the Naugatuck Valley Planning Region.

Share this reportHelp others learn about their water quality
WhatsAppXFacebookLinkedInEmail

Frequently asked questions

Is Ansonia, CT tap water safe to drink?

Ansonia's water quality earned a grade of B- (74.8/100). Some concerns have been identified. Consider a water filter for an extra layer of protection. The city ranks #36 out of 158 cities tested in Connecticut.

What contaminants are in Ansonia's water?

Lead was measured at 0.0 ppb (90th percentile). 6 PFAS compounds were detected. 35 violations are on record.

How is Ansonia's water quality grade calculated?

The grade is based on four factors: violation history (40%), lead and copper levels (25%), PFAS contamination (25%), and regulatory compliance (10%). The score is also adjusted based on how complete the available data is. See our methodology page for full details.

Do I need a water filter in Ansonia?

PFAS compounds exceed EPA limits — a reverse osmosis or activated carbon filter is recommended.

Where does Ansonia's water come from?

Ansonia's water is sourced from Purchased surface water. The city has 4 water systems serving approximately 20,949 residents.

What health violations has Ansonia's water system had?

Ansonia has 6 health-based violations on record. The most recent violation was recorded in December 2021. Health-based violations mean the water exceeded EPA maximum contaminant levels (MCLs) for a regulated substance. 14 violations remain unresolved.

Why does Ansonia have so many PFAS compounds in its water?

6 different PFAS "forever chemical" compounds were detected in Ansonia's water supply during UCMR 5 testing. PFAS contamination often originates from proximity to military installations (AFFF firefighting foam), airports, industrial manufacturing sites, or wastewater treatment facilities. Some levels exceed the 2024 EPA maximum contaminant levels — a reverse osmosis or NSF-certified activated carbon filter is strongly recommended.

How does Ansonia's water compare to other cities?

Ansonia ranks #36 out of 158 cities in Connecticut (better than 77% of state cities) and #9734 out of 15744 cities nationally (38th percentile). The grade of B- reflects the combined assessment of violation history, lead and copper levels, PFAS contamination, and regulatory compliance.