WaterVerge

Is Millersville, MD Tap Water Safe to Drink?

Graded F — but Chlorate was detected above EPA limits. Here's what's in the water and how to remove it. What to do next ↓

388K residents served 14 water systems PWSID: MD0020017
Overall Score
41.6 / 100
Violations
42 active
Last Updated
May 2026
Source
Groundwater
#99 of 107 in Maryland Top 95% nationally
Local Government
High data confidence
Reviewed by WaterVerge Editorial Team · Last updated May 2026
FGRADE
Water Quality Grade
41.6/100
waterverge.com
F 41.6/100

Millersville, MD — Water Quality Report

Millersville's drinking water received a grade of F (41.6 out of 100), indicating failing water quality. The city's 14 water systems serve approximately 387,543 residents using groundwater.

Lead levels were measured at 4.5 ppb (90th percentile), well within EPA limits. UCMR 5 testing detected 1 PFAS compound in the water supply.

The system has 99 violations on record, including 13 health-based violations. 42 remain unresolved.

Data last updated: May 2026 · Source: EPA SDWIS, UCMR 5
Analysis

What to know about Millersville's water

Millersville ranks #99 out of 107 cities in Maryland for water quality, placing it among the lowest-rated in the state.

Millersville relies on groundwater, which is generally less vulnerable to surface contamination but can be affected by naturally occurring minerals like arsenic and nitrate, as well as agricultural and industrial runoff.

PFAS compounds were detected in testing, though levels remain within current EPA limits. Residents seeking extra precaution may consider an activated carbon or reverse osmosis filter.

Hexavalent chromium (chromium-6) was detected at 0.14 µg/L in UCMR 3 testing. While below California's 10 µg/L limit and with no federal MCL set, residents sensitive to this contaminant may consider reverse osmosis filtration.

The system has seen 23 violations in the past five years, suggesting a pattern of compliance challenges that residents should monitor closely.

Quality Breakdown

Water quality score

See methodology →
41.6 out of 100 Grade F
A: 90-100
B: 74-89
C: 60-73
F: <50
How is this calculated?
Violations
0/45
F
Historical violation record including health-based and monitoring violations.
Lead & Copper
18/20
A
Lead at 4.5 ppb (90th percentile).
Contaminants
15.7/20
B
1 PFAS compound detected.
Compliance
3/10
F
Monitoring and reporting compliance with EPA regulations.
Source Risk
5/5
A
Water source: Groundwater.
Water Safety

Is Millersville, MD water safe to drink?

Concerns Identified

Millersville's drinking water has significant quality concerns based on EPA testing data. With a grade of F (41.6/100), the system has issues across multiple categories. A water filter is recommended for all residents. The city's 14 water systems serve approximately 387,543 residents using groundwater (wells).

42
Active Violations
4.5 ppb
Lead (90th %ile)
1 compound
PFAS Detected
10 events
Disaster History

Recent water quality updates for Millersville

A timeline of significant water quality events, violations, and data updates.

PFAS
1 PFAS "forever chemical" compound detected

Detected at levels within current EPA limits. PFAS persist indefinitely in the environment.

Update
Water quality data updated

Latest EPA compliance and testing data incorporated into Millersville's water quality assessment. Grade: F (41.6/100).

Violation
2 drinking water violations recorded

Contaminants: Lead and Copper Rule.

Violation
12 drinking water violations recorded

6 health-based. Contaminants: LEAD AND COPPER RULE REVISIONS.

Violation
4 drinking water violations recorded

Contaminants: Lead and Copper Rule.

Disaster
HURRICANE SANDY

Federal disaster declaration (FEMA DR-4091). Hurricane event — may have impacted local water infrastructure.

Key contaminant findings

Based on the most recent EPA sampling data for Millersville's water supply.

Lead Within Limits
Detected: 4.5 ppb Limit: 15 ppb (EPA Action Level)

Well within EPA limits.

PFAS (1 compound) Elevated
Detected: Highest: lithium at 13.1000 µg/L Limit: 0.004 µg/L (EPA MCL)

Detected but within current EPA limits. PFAS do not break down in the environment and can accumulate in the body over time. An activated carbon filter can reduce exposure.

Violation history

Millersville's water system has 99 total violations on record, including 13 health-based violations. 42 remain unresolved. 23 violations were issued in the last 5 years.

MRRPTTTMCLOther
Most recent violations:
Oct 2025 Lead and Copper Rule Open
Oct 2025 Lead and Copper Rule Open
Oct 2024 LEAD AND COPPER RULE REVISIONS Open
Oct 2024 LEAD AND COPPER RULE REVISIONS Open
Oct 2024 LEAD AND COPPER RULE REVISIONS Open

Flood & environmental risk

Anne Arundel County has experienced 10 federally declared disasters since 1971. Flooding and severe storms can overwhelm water treatment plants, cause sewage overflows, and introduce agricultural runoff, bacteria, and sediment into drinking water supplies. Local water sources include Sawmill Creek, South Fork Jabez Branch, Patuxent River, Patuxent R At Gov Bridge Natural Area Nr Bowie.

HURRICANE SANDY
Hurricane FEMA DR-4091
HURRICANE SANDY
Hurricane FEMA DR-3349
REMNANTS OF TROPICAL STORM LEE
Flood FEMA DR-4038

Where does Millersville's water come from?

Millersville's drinking water comes from groundwater (wells), supplied by 14 water systems serving approximately 387,543 people. Groundwater is generally less susceptible to surface contamination but can contain naturally occurring contaminants like arsenic, radon, and nitrate. Nearby water bodies include Sawmill Creek (river), South Fork Jabez Branch (river), Patuxent River (river), Patuxent R At Gov Bridge Natural Area Nr Bowie (river).

What Millersville residents can do

Install a water filter

Recommended: Activated carbon or reverse osmosis filter. This addresses the specific contaminants found in Millersville's water.

Request your utility's CCR

Your water utility is required to publish an annual Consumer Confidence Report (CCR) with detailed testing results. Ask for the latest copy or check your utility's website.

Flush your taps

Run cold water for 30 seconds before drinking, especially in the morning. Lead and copper leach from household plumbing when water sits in pipes.

Monitor alerts during storms

Millersville's area has a history of flooding. After severe weather, watch for boil water advisories from your local utility.

Data: EPA SDWIS, UCMR 5 (PFAS), FEMA, NOAA. Last updated May 2026.

Contaminant Alerts

Top contaminants to know

View all ↓
Lead (90th percentile)
Inorganic / Heavy Metal
Safe
4.5 ppb
EPA Action Level: 15 ppb · 30% of limit
Safe Level
lithium
PFAS / Forever Chemical
Near MCL
13.1000 µg/L
EPA MCL: 0.004 µg/L · +20% over limit
Detected
HAA5 (Disinfection Byproducts)
Disinfection Byproduct
Safe
0.7 µg/L
EPA MCL: 60 µg/L · 1% of limit
Within LimitUCMR 4 DataHAA6Br: 0.2 µg/LHAA9: 0.9 µg/L
Chromium-6 (Hexavalent Chromium)
Inorganic
Detected
0.14 µg/L
CA MCL (no federal MCL): 10 µg/L · 1% of limit
DetectedUCMR 3 Data
Strontium
Inorganic
Detected
90.0 µg/L
EPA Health Ref Level: 1,500 µg/L · 6% of limit
DetectedUCMR 3 Data
Manganese
Inorganic
Detected
17.0 µg/L
EPA Secondary MCL: 50 µg/L · 34% of limit
DetectedUCMR 4 Data
Vanadium
Inorganic
Detected
2.20 µg/L
EPA Short-term HA: 21 µg/L · 10% of limit
DetectedUCMR 3 Data
Chlorate
Disinfection Byproduct
Over HA
590.0 µg/L
EPA Lifetime HA: 210 µg/L · +20% over limit
Over Health AdvisoryUCMR 3 Data
Cobalt
Inorganic
Detected
9.90 µg/L
No federal limit: N/A µg/L · 50% of limit
DetectedNo federal MCLUCMR 3 Data
Lithium
Inorganic
Detected
13.1 µg/L
State screening level: 60 µg/L · 22% of limit
DetectedNo federal MCLUCMR 5 Data (2023–2025)
PFAS Testing

Forever chemicals overview

National PFAS report →
30
Compounds tested
1
Detected
0
Exceed EPA MCL
Compliance Record

Violation summary

99
Total violations
13
Health-based
42
Active / unresolved
Oct 2025
Most recent violation
Compliance Record

Violations & advisories

99 Total
42 Active
13 Health-based
57 Resolved
Violations by category
Lead and Copper Rule
20
Inorganic Chemicals
19
Total Coliform Rule
16
Consumer Confidence Rule
14
Lead and Copper Rule Revisions
12
Oct 2025 Active
Lead and Copper Rule
Monitoring & Reporting
Monitoring & Reporting 0
Oct 2025 Active
Lead and Copper Rule
Monitoring & Reporting
Monitoring & Reporting 0
Oct 2024 Active
LEAD AND COPPER RULE REVISIONS
Reporting
Reporting 0
Oct 2024 Active
LEAD AND COPPER RULE REVISIONS
Treatment Technique
Health-Based Health 0
Oct 2024 Active
LEAD AND COPPER RULE REVISIONS
Reporting
Reporting 0
Oct 2024 Active
LEAD AND COPPER RULE REVISIONS
Treatment Technique
Health-Based Health 0
Oct 2024 Active
LEAD AND COPPER RULE REVISIONS
Treatment Technique
Health-Based Health 0
Oct 2024 Active
LEAD AND COPPER RULE REVISIONS
Reporting
Reporting 0
Oct 2024 Active
LEAD AND COPPER RULE REVISIONS
Treatment Technique
Health-Based Health 0
Oct 2024 Active
LEAD AND COPPER RULE REVISIONS
Reporting
Reporting 0
Oct 2024 Active
LEAD AND COPPER RULE REVISIONS
Treatment Technique
Health-Based Health 0
Oct 2024 Active
LEAD AND COPPER RULE REVISIONS
Reporting
Reporting 0
Oct 2024 Active
LEAD AND COPPER RULE REVISIONS
Treatment Technique
Health-Based Health 0
Oct 2024 Active
LEAD AND COPPER RULE REVISIONS
Reporting
Reporting 0
Oct 2022 Active
Lead and Copper Rule
Monitoring & Reporting
Monitoring & Reporting 0
Oct 2022 Active
Lead and Copper Rule
Monitoring & Reporting
Monitoring & Reporting 0
Oct 2022 Active
Lead and Copper Rule
Monitoring & Reporting
Monitoring & Reporting 0
Oct 2022 Active
Lead and Copper Rule
Monitoring & Reporting
Monitoring & Reporting 0
Oct 2021 Active
Lead and Copper Rule
Monitoring & Reporting
Monitoring & Reporting 0
Oct 2021 Active
Lead and Copper Rule
Monitoring & Reporting
Monitoring & Reporting 0
Showing 20 of 99 violations
Environmental Risk

Drought conditions

D2 — severe drought

Anne Arundel County is currently in D2 (severe drought) per the U.S. Drought Monitor (week of May 5, 2026). Drought can elevate disinfection-byproduct (TTHM/HAA5) levels and taste/odor issues as utilities draw from lower reservoirs.

4
Weeks at D2+ (current streak)
10.4%
Months in D2+ (last 30y)
7
Weeks at D2+ (last 5y)

Source: U.S. Drought Monitor, updated weekly by NDMC, USDA, and NOAA.

Environmental Risk

Flood & disaster history

10
Declared disasters
Nov 2012
Most recent
Hurricane
Most common type

Anne Arundel County has experienced 10 federally declared disasters since 1971. Flooding and severe weather can compromise water treatment infrastructure and introduce contaminants into drinking water supplies.

Nov 2012
HURRICANE SANDY
Hurricane FEMA #4091
Oct 2012
HURRICANE SANDY
Hurricane FEMA #3349
Oct 2011
REMNANTS OF TROPICAL STORM LEE
Flood FEMA #4038
Aug 2011
HURRICANE IRENE
Hurricane FEMA #3335
Sep 2005
HURRICANE KATRINA EVACUATION
Hurricane FEMA #3251
Sep 2003
HURRICANE ISABEL
Hurricane FEMA #1492

Recommended water filters

Based on contaminants detected in Millersville's water supply, we recommend the following filter types.

🧪
For PFAS
Reverse Osmosis or Activated Carbon Block
1 PFAS compound detected

Full contaminants report

Contaminant Detected Level EPA Limit Unit Category Status
Lead (90th percentile) 4.5 15 ppb Inorganic Safe
11Cl-PF3OUdS ND HI µg/L PFAS Not Detected
4:2 FTS ND HI µg/L PFAS Not Detected
6:2 FTS ND HI µg/L PFAS Not Detected
8:2 FTS ND HI µg/L PFAS Not Detected
9Cl-PF3ONS ND HI µg/L PFAS Not Detected
ADONA ND HI µg/L PFAS Not Detected
HFPO-DA ND 0.01 µg/L PFAS Not Detected
lithium 13.100 HI µg/L PFAS Detected
NEtFOSAA ND HI µg/L PFAS Not Detected
NFDHA ND HI µg/L PFAS Not Detected
NMeFOSAA ND HI µg/L PFAS Not Detected
PFBA ND HI µg/L PFAS Not Detected
PFBS ND HI µg/L PFAS Not Detected
PFDA ND HI µg/L PFAS Not Detected
PFDoA ND HI µg/L PFAS Not Detected
PFEESA ND HI µg/L PFAS Not Detected
PFHpA ND HI µg/L PFAS Not Detected
PFHpS ND HI µg/L PFAS Not Detected
PFHxA ND HI µg/L PFAS Not Detected
PFHxS ND HI µg/L PFAS Not Detected
PFMBA ND HI µg/L PFAS Not Detected
PFMPA ND HI µg/L PFAS Not Detected
PFNA ND HI µg/L PFAS Not Detected
PFOA ND 0.004 µg/L PFAS Not Detected
PFOS ND 0.004 µg/L PFAS Not Detected
PFPeA ND HI µg/L PFAS Not Detected
PFPeS ND HI µg/L PFAS Not Detected
PFTA ND HI µg/L PFAS Not Detected
PFTrDA ND HI µg/L PFAS Not Detected
PFUnA ND HI µg/L PFAS Not Detected
Data source: EPA SDWIS, UCMR 5, local utility CCR.

Lead level trend (90th percentile)

EPA action level: 15 ppb
Lead has decreased by 2.3 ppb from 1992 (5.0 ppb) to 2025 (2.7 ppb).
Contaminant Rankings

See how Millersville compares by contaminant

Explore where Millersville ranks among all Maryland cities for specific contaminants.

Infrastructure

Water source & infrastructure

Primary Source
Groundwater
Operator
Local Government
Population Served
387,543
Water Systems
14
Water Source

Where Millersville's water comes from

Groundwater

Millersville's drinking water is drawn from underground aquifers through wells.

Groundwater is naturally filtered through rock and soil layers, generally requiring less treatment than surface water. However, it can contain naturally occurring contaminants like arsenic, radon, and minerals.

Agricultural activity, septic systems, and industrial operations near well fields can introduce nitrates, pesticides, and volatile organic compounds.

The system is operated by local government ownership and serves approximately 387,543 people through 14 water systems.

Local Hydrology

Water bodies near Millersville

Millersville is located near 4 notable water bodies. These water bodies contribute to the regional watershed and may indirectly affect groundwater quality.

Sawmill Creek
river
South Fork Jabez Branch
river
Patuxent River
river
Patuxent R At Gov Bridge Natural Area Nr Bowie
river
Infrastructure

Water systems serving Millersville

System Name PWSID Population Source
GLEN BURNIE-BROADNECK MD0020017 290,606 GW
CROFTON-ODENTON MD0020008 62,986 GW
BROAD CREEK MD0020004 23,179 GW
EASTERN CORRECTIONAL INSTITUTE MD0190013 3,500 GW
HERALD HARBOR MD0020044 2,241 GW
SAINT MARYS COLLEGE MD0180013 2,200 GW
CROWNSVILLE HOSPITAL CENTER MD0020009 1,348 GW
CHELTENHAM BOYS VILLAGE MD0160003 330 GW
GIBSON ISLAND MD0020013 275 GW
CHARLOTTE HALL VA HOME MD0180217 270 GW
TOWN OF DARLINGTON MD0120009 250 GW
ROSE HAVEN MD0020030 235 GW
MEADOW MOUNTAIN BOYS CAMP MD0110230 63 GW
BACKBONE MOUNTAIN BOYS CAMP MD0110204 60 GW
Regional Comparison

How Millersville compares

Full Maryland rankings →

Millersville's score of 41.6/100 is below the average of 62/100 among major Maryland cities. It outscores 4 of 10 nearby cities. 6 of 10 nearby cities score higher.

Millersville (this city)
41.6
Laurel
95
Baltimore
39.8
Frederick
37.5
La Plata
39.5
Maryland avg
62
City Profile

About Millersville, MD

Wikipedia →

Millersville is an unincorporated community in Anne Arundel County, Maryland, United States. Population was 20,965 in 2015 based on American Community Survey data.

Share this reportHelp others learn about their water quality
WhatsAppXFacebookLinkedInEmail

Frequently asked questions

Is Millersville, MD tap water safe to drink?

Millersville's water quality earned a grade of F (41.6/100). Significant issues have been found. A water filter is strongly recommended. The city ranks #99 out of 107 cities tested in Maryland.

What contaminants are in Millersville's water?

Lead was measured at 4.5 ppb (90th percentile). 1 PFAS compound was detected. 99 violations are on record.

How is Millersville's water quality grade calculated?

The grade is based on four factors: violation history (40%), lead and copper levels (25%), PFAS contamination (25%), and regulatory compliance (10%). The score is also adjusted based on how complete the available data is. See our methodology page for full details.

Do I need a water filter in Millersville?

PFAS compounds have been detected. A filter with activated carbon can help reduce exposure.

Where does Millersville's water come from?

Millersville's water is sourced from Groundwater. The city has 14 water systems serving approximately 387,543 residents.

What health violations has Millersville's water system had?

Millersville has 13 health-based violations on record. The most recent violation was recorded in October 2025. Health-based violations mean the water exceeded EPA maximum contaminant levels (MCLs) for a regulated substance. 42 violations remain unresolved.

Is Millersville's groundwater at risk of contamination?

Millersville uses groundwater, which can be affected by naturally occurring contaminants like arsenic, radon, and nitrate, as well as agricultural runoff and industrial activity. The system has 99 violations on record that may relate to groundwater quality. Groundwater systems are generally less susceptible to surface contamination but should be monitored for emerging contaminants like PFAS.

How does Millersville's water compare to other cities?

Millersville ranks #99 out of 107 cities in Maryland (better than 7% of state cities) and #14963 out of 15744 cities nationally (5th percentile). The grade of F reflects the combined assessment of violation history, lead and copper levels, PFAS contamination, and regulatory compliance.