Is Melbourne, FL Tap Water Safe to Drink?
Graded A- — but Chlorate was detected above EPA limits. Here's what's in the water and how to remove it. What to do next ↓
87/100
waterverge.com Melbourne, FL — Water Quality Report
Melbourne's drinking water received a grade of A- (87 out of 100), indicating good water quality. The city's 1 water system serves approximately 167,753 residents using surface water.
Lead levels were measured at 1.2 ppb (90th percentile), well within EPA limits. UCMR 5 testing detected 3 PFAS compounds in the water supply.
The system has 24 violations on record, including 0 health-based violations. 2 remain unresolved.
What to know about Melbourne's water
Melbourne ranks #77 out of 388 cities in Florida for water quality, placing it above average in the state.
The city draws from surface water sources, which are more susceptible to seasonal runoff and agricultural contamination, requiring extensive multi-barrier treatment including coagulation, filtration, and disinfection.
PFAS compounds were detected in testing, though levels remain within current EPA limits. Residents seeking extra precaution may consider an activated carbon or reverse osmosis filter.
Hexavalent chromium (chromium-6) was detected at 0.11 µg/L in UCMR 3 testing. While below California's 10 µg/L limit and with no federal MCL set, residents sensitive to this contaminant may consider reverse osmosis filtration.
Water quality score
See methodology →Is Melbourne, FL water safe to drink?
Melbourne's tap water meets most EPA standards but has areas that warrant attention. With a grade of A- (87/100), some contaminant levels or compliance issues suggest that residents may benefit from additional filtration. The city's 1 water system serves approximately 167,753 residents using surface water (rivers, lakes, or reservoirs).
Recent water quality updates for Melbourne
A timeline of significant water quality events, violations, and data updates.
Detected at levels within current EPA limits. PFAS persist indefinitely in the environment.
Latest EPA compliance and testing data incorporated into Melbourne's water quality assessment. Grade: A- (87/100).
Contaminants: Revised Total Coliform Rule.
Federal disaster declaration (FEMA DR-4834). Hurricane event — may have impacted local water infrastructure.
Federal disaster declaration (FEMA DR-3622). Hurricane event — may have impacted local water infrastructure.
Contaminants: Total Haloacetic Acids (HAA5), TTHM.
Key contaminant findings
Based on the most recent EPA sampling data for Melbourne's water supply.
Well within EPA limits.
Detected but within current EPA limits. PFAS do not break down in the environment and can accumulate in the body over time. An activated carbon filter can reduce exposure.
PFAS "forever chemicals" detected
UCMR 5 testing found 3 PFAS compounds in Melbourne's water supply. PFAS are synthetic chemicals that persist indefinitely in the environment and the human body.
Violation history
Melbourne's water system has 24 total violations on record, including 0 health-based violations. 2 remain unresolved. 3 violations were issued in the last 5 years.
Flood & environmental risk
Brevard County has experienced 10 federally declared disasters since 2017. Flooding and severe storms can overwhelm water treatment plants, cause sewage overflows, and introduce agricultural runoff, bacteria, and sediment into drinking water supplies. Local water sources include St. Johns River, Eau Gallie Riv, Crane Creek, Turkey Creek.
Where does Melbourne's water come from?
Melbourne's drinking water comes from surface water (rivers, lakes, or reservoirs), supplied by 1 water system serving approximately 167,753 people. Surface water sources are more susceptible to contamination from runoff, industrial discharge, and algal blooms, requiring extensive treatment. Nearby water bodies include St. Johns River (river), Eau Gallie Riv (river), Crane Creek (river), Turkey Creek (stream).
What Melbourne residents can do
Your water utility is required to publish an annual Consumer Confidence Report (CCR) with detailed testing results. Ask for the latest copy or check your utility's website.
Melbourne's area has a history of flooding. After severe weather, watch for boil water advisories from your local utility.
Data: EPA SDWIS, UCMR 5 (PFAS), FEMA, NOAA. Last updated May 2026.
Top contaminants to know
View all ↓Forever chemicals overview
National PFAS report →Violation summary
Violations & advisories
Top industrial polluters within 10 miles of Melbourne
Industrial polluters nearby
Reported releases to surface water by facilities near Melbourne, ranked by pounds discharged annually.
| Facility | Top chemical | To surface water (lbs/yr) | Distance |
|---|---|---|---|
ROCKWELL COLLINS MELBOURNE, FL32901 | — | — | 2.2 mi |
SYMETRICS INDUSTRIES LLC DBA EXTANT AEROSPACE MELBOURNE, FL32901 | — | — | 1.5 mi |
FAR RESEARCH INC. (DBA FAR CHEMICAL INC.) PALM BAY, FL32905 | — | — | 5.7 mi |
L3HARRIS TECHNOLOGIES INC. PALM BAY, FL32905 | — | — | 6.5 mi |
RENESAS ELECTRONICS AMERICA INC. PALM BAY, FL32905 | — | — | 6.4 mi |
Source: EPA Toxic Release Inventory (TRI) 2023
Superfund sites within 10 miles of Melbourne
Superfund sites nearby
Federally tracked hazardous-waste sites on the EPA National Priorities List. Proximity does not necessarily indicate tap-water contamination — the connection depends on hydrology and treatment.
- HARRIS CORP PALM BAY PLANT6.7 mi
Source: EPA Superfund National Priorities List
Drought conditions
D2 — severe droughtBrevard County is currently in D2 (severe drought) per the U.S. Drought Monitor (week of May 5, 2026). Drought can elevate disinfection-byproduct (TTHM/HAA5) levels and taste/odor issues as utilities draw from lower reservoirs.
Source: U.S. Drought Monitor, updated weekly by NDMC, USDA, and NOAA.
Flood & disaster history
Brevard County has experienced 10 federally declared disasters since 2017. Flooding and severe weather can compromise water treatment infrastructure and introduce contaminants into drinking water supplies.
Recommended water filters
Based on contaminants detected in Melbourne's water supply, we recommend the following filter types.
Full contaminants report
| Contaminant | Detected Level | EPA Limit | Unit | Category | Status |
|---|---|---|---|---|---|
| Lead (90th percentile) LeadHeavy Metal A toxic heavy metal that can leach into drinking water from older pipes, solder, and fixtures. No amount of lead in water is considered safe. Health EffectsBrain and nervous system damage in children, kidney damage, high blood pressure, and reproductive problems in adults. EPA Limit15 ppb action level Common SourcesCorrosion of lead pipes, lead solder, brass faucets, and household plumbing. | 1.2 | 15 | ppb | Inorganic | Safe |
| 11Cl-PF3OUdS | ND | HI | µg/L | PFAS | Not Detected |
| 4:2 FTS | ND | HI | µg/L | PFAS | Not Detected |
| 6:2 FTS 6:2 FTSPFAS A fluorotelomer sulfonate commonly found at sites contaminated with aqueous film-forming foam (AFFF) used in firefighting. Health EffectsPotential liver toxicity and endocrine disruption. Less studied but identified as a contaminant of concern. EPA LimitNo individual MCL (not yet regulated) Common SourcesFirefighting foam (AFFF), airports, military bases, and industrial facilities. | ND | HI | µg/L | PFAS | Not Detected |
| 8:2 FTS | ND | HI | µg/L | PFAS | Not Detected |
| 9Cl-PF3ONS | ND | HI | µg/L | PFAS | Not Detected |
| ADONA | ND | HI | µg/L | PFAS | Not Detected |
| HFPO-DA HFPO-DA (GenX)PFAS A replacement for PFOA in manufacturing, marketed as safer but still a persistent "forever chemical." Also known as GenX. Health EffectsLiver and kidney effects, reproductive toxicity, immune system effects, and potential cancer risk. EPA Limit10 ppt MCL Common SourcesFluoropolymer manufacturing (used as PFOA replacement), industrial wastewater discharge. | ND | 0.01 | µg/L | PFAS | Not Detected |
| lithium LithiumInorganic A naturally occurring alkali metal found in groundwater. Monitored under UCMR 5 to assess occurrence in drinking water. Health EffectsKidney effects at high doses. Low-level exposure effects under study; some research suggests neurological effects. EPA LimitNo MCL (monitoring only under UCMR 5) Common SourcesNatural mineral deposits, geothermal water, and industrial discharge. | ND | HI | µg/L | PFAS | Not Detected |
| NEtFOSAA | ND | HI | µg/L | PFAS | Not Detected |
| NFDHA | ND | HI | µg/L | PFAS | Not Detected |
| NMeFOSAA | ND | HI | µg/L | PFAS | Not Detected |
| PFBA PFBAPFAS One of the shortest-chain PFAS compounds. Very mobile in water and difficult to remove with standard filtration. Health EffectsThyroid effects, potential developmental toxicity. Shorter half-life in body than long-chain PFAS. EPA LimitNo individual MCL (not yet regulated) Common SourcesDegradation of longer-chain PFAS, industrial discharge, and firefighting foam. | 0.009 | HI | µg/L | PFAS | Detected |
| PFBS PFBSPFAS A short-chain PFAS used as a replacement for PFOS. While it clears the body faster than long-chain PFAS, it still persists in the environment. Health EffectsThyroid effects, reproductive and developmental toxicity, kidney effects. EPA LimitPart of Hazard Index (1.0) Common SourcesIndustrial discharge, firefighting foam, and as a replacement chemical in manufacturing. | 0.004 | HI | µg/L | PFAS | Detected |
| PFDA | ND | HI | µg/L | PFAS | Not Detected |
| PFDoA | ND | HI | µg/L | PFAS | Not Detected |
| PFEESA | ND | HI | µg/L | PFAS | Not Detected |
| PFHpA PFHpAPFAS A medium-chain PFAS compound found in various environmental samples. Less studied than PFOA/PFOS but still considered a contaminant of concern. Health EffectsLiver effects, potential developmental toxicity, and endocrine disruption. EPA LimitPart of Hazard Index (1.0) Common SourcesDegradation of longer-chain PFAS, industrial discharge, and contaminated water sources. | ND | HI | µg/L | PFAS | Not Detected |
| PFHpS | ND | HI | µg/L | PFAS | Not Detected |
| PFHxA PFHxAPFAS A short-chain PFAS replacement chemical widely used after manufacturers phased out longer-chain PFAS. Very commonly detected in water. Health EffectsLiver and kidney effects, potential thyroid disruption. Considered less toxic than long-chain PFAS but still persistent. EPA LimitNo individual MCL (not yet regulated) Common SourcesIndustrial processes, firefighting foam (AFFF), food packaging, and textile treatment. | ND | HI | µg/L | PFAS | Not Detected |
| PFHxS PFHxSPFAS A medium-chain PFAS found in firefighting foam and consumer products. It has a long half-life in the human body, similar to long-chain PFAS. Health EffectsImmune system effects, thyroid disruption, and potential reproductive and developmental harm. EPA LimitPart of Hazard Index (1.0) Common SourcesFirefighting foam (AFFF), waterproof textiles, food packaging, and industrial discharge. | ND | HI | µg/L | PFAS | Not Detected |
| PFMBA | ND | HI | µg/L | PFAS | Not Detected |
| PFMPA | ND | HI | µg/L | PFAS | Not Detected |
| PFNA PFNAPFAS A long-chain PFAS compound used in manufacturing fluoropolymers. It bioaccumulates in the body and is very persistent in the environment. Health EffectsDevelopmental effects, liver toxicity, immune suppression, and potential cancer risk. EPA LimitPart of Hazard Index (1.0) Common SourcesFluoropolymer manufacturing, industrial emissions, and contaminated water sources. | ND | HI | µg/L | PFAS | Not Detected |
| PFOA PFOAPFAS A long-chain PFAS ("forever chemical") once widely used in nonstick coatings and firefighting foam. It persists in the body and environment for years. Health EffectsLinked to kidney and testicular cancer, thyroid disease, elevated cholesterol, and reproductive issues. EPA Limit4.0 ppt MCL Common SourcesIndustrial discharge, firefighting foam (AFFF), nonstick cookware manufacturing, and contaminated groundwater. | ND | 0.004 | µg/L | PFAS | Not Detected |
| PFOS PFOSPFAS A long-chain PFAS compound historically used in stain-resistant coatings and firefighting foam. One of the most studied and persistent PFAS chemicals. Health EffectsLiver damage, immune system suppression, thyroid disruption, increased cholesterol, and potential cancer risk. EPA Limit4.0 ppt MCL Common SourcesFirefighting foam (AFFF), industrial sites, stain-resistant fabric treatments, and contaminated groundwater. | ND | 0.004 | µg/L | PFAS | Not Detected |
| PFPeA PFPeAPFAS A short-chain PFAS compound commonly detected in drinking water. One of the most frequently found PFAS in UCMR 5 monitoring. Health EffectsLess studied than PFOA/PFOS. Potential liver and thyroid effects. Research is ongoing. EPA LimitNo individual MCL (not yet regulated) Common SourcesIndustrial discharge, firefighting foam degradation, and consumer products. | 0.003 | HI | µg/L | PFAS | Detected |
| PFPeS | ND | HI | µg/L | PFAS | Not Detected |
| PFTA | ND | HI | µg/L | PFAS | Not Detected |
| PFTrDA | ND | HI | µg/L | PFAS | Not Detected |
| PFUnA | ND | HI | µg/L | PFAS | Not Detected |
Lead level trend (90th percentile)
See how Melbourne compares by contaminant
Explore where Melbourne ranks among all Florida cities for specific contaminants.
Water source & infrastructure
Where Melbourne's water comes from
Melbourne's drinking water comes primarily from surface water sources such as rivers, lakes, or reservoirs.
Surface water systems require multi-stage treatment including coagulation, sedimentation, filtration, and disinfection to meet EPA Safe Drinking Water Act standards.
These sources can be impacted by seasonal changes, stormwater runoff, upstream agriculture, and industrial discharge.
The system is operated by local government ownership and serves approximately 167,753 people through 1 water system.
Water bodies near Melbourne
Melbourne is located near 4 notable water bodies. As a surface water system, these water bodies may directly influence the city's drinking water supply.
Water systems serving Melbourne
| System Name | PWSID | Population | Source |
|---|---|---|---|
| MELBOURNE, CITY OF | FL3051447 | 167,753 | SW |
How Melbourne compares
Full Florida rankings →Melbourne's score of 87/100 is above the average of 50/100 among major Florida cities. It outscores 10 of 10 nearby cities.
Nearby cities
View Florida rankings →About Melbourne, FL
Wikipedia →Melbourne is a city in Brevard County, Florida, United States. It is located 72 miles (116 km) southeast of Orlando along Florida's Space Coast, so named because of the region's proximity to Cape Canaveral and the Kennedy Space Center. The city had an estimated population of 87,561 as of July 1, 2024, according to the U.S. Census Bureau. Melbourne is a principal city of the Palm Bay–Melbourne–Titusville metropolitan statistical area. Downtown Melbourne and most of the city lie inland of the Indian River Lagoon, with a small part extending over to the barrier island.
Learn more about your water
Guides and resources related to Melbourne's water quality findings.
Explore water quality across Brevard
Frequently asked questions
Is Melbourne, FL tap water safe to drink?
Melbourne's water quality earned a grade of A- (87/100). The water generally meets EPA standards and is considered safe for consumption. The city ranks #77 out of 388 cities tested in Florida.
What contaminants are in Melbourne's water?
Lead was measured at 1.2 ppb (90th percentile). 3 PFAS compounds were detected. 24 violations are on record.
How is Melbourne's water quality grade calculated?
The grade is based on four factors: violation history (40%), lead and copper levels (25%), PFAS contamination (25%), and regulatory compliance (10%). The score is also adjusted based on how complete the available data is. See our methodology page for full details.
Do I need a water filter in Melbourne?
PFAS compounds have been detected. A filter with activated carbon can help reduce exposure.
Where does Melbourne's water come from?
Melbourne's water is sourced from Surface water. The city has 1 water system serving approximately 167,753 residents.
Why does Melbourne have so many PFAS compounds in its water?
3 different PFAS "forever chemical" compounds were detected in Melbourne's water supply during UCMR 5 testing. PFAS contamination often originates from proximity to military installations (AFFF firefighting foam), airports, industrial manufacturing sites, or wastewater treatment facilities. While detected, current levels are within EPA limits. An activated carbon filter can further reduce exposure.
How does Melbourne's water compare to other cities?
Melbourne ranks #77 out of 388 cities in Florida (better than 80% of state cities) and #4288 out of 15744 cities nationally (73th percentile). The grade of A- reflects the combined assessment of violation history, lead and copper levels, PFAS contamination, and regulatory compliance.