Is Marysville, IN Tap Water Safe to Drink?
Graded A- — but Copper and PFOA were detected above EPA limits. Here's what's in the water and how to remove it. What to do next ↓
85.5/100
waterverge.com Marysville, IN — Water Quality Report
Marysville's drinking water received a grade of A- (85.5 out of 100), indicating good water quality. The city's 1 water system serves approximately 6,813 residents using purchased ground water.
Lead levels were measured at 0.0 ppb (90th percentile), well within EPA limits. UCMR 5 testing detected 1 PFAS compound, with levels exceeding EPA maximum contaminant levels in the water supply.
The system has 14 violations on record, including 3 health-based violations. 5 remain unresolved.
What to know about Marysville's water
Marysville ranks #147 out of 414 cities in Indiana for water quality, placing it mid-range in the state.
Marysville purchases its water from a regional wholesaler, meaning quality depends on both the supplier's treatment and the local distribution system's condition.
Of particular concern: PFAS "forever chemical" levels exceed the 2024 EPA maximum contaminant levels. These synthetic compounds don't break down naturally and require specialized filtration such as reverse osmosis or granular activated carbon.
Water quality score
See methodology →Is Marysville, IN water safe to drink?
Marysville's drinking water has significant quality concerns based on EPA testing data. With a grade of A- (85.5/100), the system has issues across multiple categories. A water filter is recommended for all residents. The city's 1 water system serves approximately 6,813 residents using groundwater (wells).
Recent water quality updates for Marysville
A timeline of significant water quality events, violations, and data updates.
PFAS levels exceed EPA maximum contaminant levels. Reverse osmosis or activated carbon filtration recommended.
Latest EPA compliance and testing data incorporated into Marysville's water quality assessment. Grade: A- (85.5/100).
Federal disaster declaration (FEMA DR-4882). Flood event — may have impacted local water infrastructure.
Federal disaster declaration (FEMA DR-4363). Flood event — may have impacted local water infrastructure.
Contaminants: Consumer Confidence Rule.
Contaminants: TTHM, Total Haloacetic Acids (HAA5).
Key contaminant findings
Based on the most recent EPA sampling data for Marysville's water supply.
Well within EPA limits.
Exceeds EPA action level. Copper can leach from household plumbing — flush taps for 30 seconds before drinking.
PFAS "forever chemicals" exceed EPA maximum contaminant levels. Reverse osmosis or granular activated carbon filtration strongly recommended.
Violation history
Marysville's water system has 14 total violations on record, including 3 health-based violations. 5 remain unresolved.
Flood & environmental risk
Clark County has experienced 6 federally declared disasters since 1991. Flooding and severe storms can overwhelm water treatment plants, cause sewage overflows, and introduce agricultural runoff, bacteria, and sediment into drinking water supplies.
Where does Marysville's water come from?
Marysville's drinking water comes from groundwater (wells), supplied by 1 water system serving approximately 6,813 people. Groundwater is generally less susceptible to surface contamination but can contain naturally occurring contaminants like arsenic, radon, and nitrate.
What Marysville residents can do
Recommended: Reverse osmosis system. This addresses the specific contaminants found in Marysville's water.
Your water utility is required to publish an annual Consumer Confidence Report (CCR) with detailed testing results. Ask for the latest copy or check your utility's website.
Marysville's area has a history of flooding. After severe weather, watch for boil water advisories from your local utility.
Data: EPA SDWIS, UCMR 5 (PFAS), FEMA, NOAA. Last updated May 2026.
Top contaminants to know
View all ↓Forever chemicals overview
National PFAS report →Violation summary
Violations & advisories
Flood & disaster history
Clark County has experienced 6 federally declared disasters since 1991. Flooding and severe weather can compromise water treatment infrastructure and introduce contaminants into drinking water supplies.
Recommended water filters
Based on contaminants detected in Marysville's water supply, we recommend the following filter types.
Full contaminants report
| Contaminant | Detected Level | EPA Limit | Unit | Category | Status |
|---|---|---|---|---|---|
| Lead (90th percentile) LeadHeavy Metal A toxic heavy metal that can leach into drinking water from older pipes, solder, and fixtures. No amount of lead in water is considered safe. Health EffectsBrain and nervous system damage in children, kidney damage, high blood pressure, and reproductive problems in adults. EPA Limit15 ppb action level Common SourcesCorrosion of lead pipes, lead solder, brass faucets, and household plumbing. | 0.0 | 15 | ppb | Inorganic | Safe |
| Copper (90th percentile) CopperInorganic A metal that enters drinking water mainly through corrosion of copper plumbing. Small amounts are essential for health, but excess levels are harmful. Health EffectsGastrointestinal distress (nausea, vomiting, diarrhea) at short-term high levels; liver and kidney damage from long-term exposure. EPA Limit1.3 mg/L action level Common SourcesCorrosion of copper household plumbing, erosion of natural deposits. | 1.37 | 1.3 | mg/L | Inorganic | Over Limit |
| 11Cl-PF3OUdS | ND | HI | µg/L | PFAS | Not Detected |
| 4:2 FTS | ND | HI | µg/L | PFAS | Not Detected |
| 6:2 FTS 6:2 FTSPFAS A fluorotelomer sulfonate commonly found at sites contaminated with aqueous film-forming foam (AFFF) used in firefighting. Health EffectsPotential liver toxicity and endocrine disruption. Less studied but identified as a contaminant of concern. EPA LimitNo individual MCL (not yet regulated) Common SourcesFirefighting foam (AFFF), airports, military bases, and industrial facilities. | ND | HI | µg/L | PFAS | Not Detected |
| 8:2 FTS | ND | HI | µg/L | PFAS | Not Detected |
| 9Cl-PF3ONS | ND | HI | µg/L | PFAS | Not Detected |
| ADONA | ND | HI | µg/L | PFAS | Not Detected |
| HFPO-DA HFPO-DA (GenX)PFAS A replacement for PFOA in manufacturing, marketed as safer but still a persistent "forever chemical." Also known as GenX. Health EffectsLiver and kidney effects, reproductive toxicity, immune system effects, and potential cancer risk. EPA Limit10 ppt MCL Common SourcesFluoropolymer manufacturing (used as PFOA replacement), industrial wastewater discharge. | ND | 0.01 | µg/L | PFAS | Not Detected |
| lithium LithiumInorganic A naturally occurring alkali metal found in groundwater. Monitored under UCMR 5 to assess occurrence in drinking water. Health EffectsKidney effects at high doses. Low-level exposure effects under study; some research suggests neurological effects. EPA LimitNo MCL (monitoring only under UCMR 5) Common SourcesNatural mineral deposits, geothermal water, and industrial discharge. | ND | HI | µg/L | PFAS | Not Detected |
| NEtFOSAA | ND | HI | µg/L | PFAS | Not Detected |
| NFDHA | ND | HI | µg/L | PFAS | Not Detected |
| NMeFOSAA | ND | HI | µg/L | PFAS | Not Detected |
| PFBA PFBAPFAS One of the shortest-chain PFAS compounds. Very mobile in water and difficult to remove with standard filtration. Health EffectsThyroid effects, potential developmental toxicity. Shorter half-life in body than long-chain PFAS. EPA LimitNo individual MCL (not yet regulated) Common SourcesDegradation of longer-chain PFAS, industrial discharge, and firefighting foam. | ND | HI | µg/L | PFAS | Not Detected |
| PFBS PFBSPFAS A short-chain PFAS used as a replacement for PFOS. While it clears the body faster than long-chain PFAS, it still persists in the environment. Health EffectsThyroid effects, reproductive and developmental toxicity, kidney effects. EPA LimitPart of Hazard Index (1.0) Common SourcesIndustrial discharge, firefighting foam, and as a replacement chemical in manufacturing. | ND | HI | µg/L | PFAS | Not Detected |
| PFDA | ND | HI | µg/L | PFAS | Not Detected |
| PFDoA | ND | HI | µg/L | PFAS | Not Detected |
| PFEESA | ND | HI | µg/L | PFAS | Not Detected |
| PFHpA PFHpAPFAS A medium-chain PFAS compound found in various environmental samples. Less studied than PFOA/PFOS but still considered a contaminant of concern. Health EffectsLiver effects, potential developmental toxicity, and endocrine disruption. EPA LimitPart of Hazard Index (1.0) Common SourcesDegradation of longer-chain PFAS, industrial discharge, and contaminated water sources. | ND | HI | µg/L | PFAS | Not Detected |
| PFHpS | ND | HI | µg/L | PFAS | Not Detected |
| PFHxA PFHxAPFAS A short-chain PFAS replacement chemical widely used after manufacturers phased out longer-chain PFAS. Very commonly detected in water. Health EffectsLiver and kidney effects, potential thyroid disruption. Considered less toxic than long-chain PFAS but still persistent. EPA LimitNo individual MCL (not yet regulated) Common SourcesIndustrial processes, firefighting foam (AFFF), food packaging, and textile treatment. | ND | HI | µg/L | PFAS | Not Detected |
| PFHxS PFHxSPFAS A medium-chain PFAS found in firefighting foam and consumer products. It has a long half-life in the human body, similar to long-chain PFAS. Health EffectsImmune system effects, thyroid disruption, and potential reproductive and developmental harm. EPA LimitPart of Hazard Index (1.0) Common SourcesFirefighting foam (AFFF), waterproof textiles, food packaging, and industrial discharge. | ND | HI | µg/L | PFAS | Not Detected |
| PFMBA | ND | HI | µg/L | PFAS | Not Detected |
| PFMPA | ND | HI | µg/L | PFAS | Not Detected |
| PFNA PFNAPFAS A long-chain PFAS compound used in manufacturing fluoropolymers. It bioaccumulates in the body and is very persistent in the environment. Health EffectsDevelopmental effects, liver toxicity, immune suppression, and potential cancer risk. EPA LimitPart of Hazard Index (1.0) Common SourcesFluoropolymer manufacturing, industrial emissions, and contaminated water sources. | ND | HI | µg/L | PFAS | Not Detected |
| PFOA PFOAPFAS A long-chain PFAS ("forever chemical") once widely used in nonstick coatings and firefighting foam. It persists in the body and environment for years. Health EffectsLinked to kidney and testicular cancer, thyroid disease, elevated cholesterol, and reproductive issues. EPA Limit4.0 ppt MCL Common SourcesIndustrial discharge, firefighting foam (AFFF), nonstick cookware manufacturing, and contaminated groundwater. | 0.015 | 0.004 | µg/L | PFAS | Over MCL |
| PFOS PFOSPFAS A long-chain PFAS compound historically used in stain-resistant coatings and firefighting foam. One of the most studied and persistent PFAS chemicals. Health EffectsLiver damage, immune system suppression, thyroid disruption, increased cholesterol, and potential cancer risk. EPA Limit4.0 ppt MCL Common SourcesFirefighting foam (AFFF), industrial sites, stain-resistant fabric treatments, and contaminated groundwater. | ND | 0.004 | µg/L | PFAS | Not Detected |
| PFPeA PFPeAPFAS A short-chain PFAS compound commonly detected in drinking water. One of the most frequently found PFAS in UCMR 5 monitoring. Health EffectsLess studied than PFOA/PFOS. Potential liver and thyroid effects. Research is ongoing. EPA LimitNo individual MCL (not yet regulated) Common SourcesIndustrial discharge, firefighting foam degradation, and consumer products. | ND | HI | µg/L | PFAS | Not Detected |
| PFPeS | ND | HI | µg/L | PFAS | Not Detected |
| PFTA | ND | HI | µg/L | PFAS | Not Detected |
| PFTrDA | ND | HI | µg/L | PFAS | Not Detected |
| PFUnA | ND | HI | µg/L | PFAS | Not Detected |
Lead level trend (90th percentile)
Copper level trend (90th percentile)
See how Marysville compares by contaminant
Explore where Marysville ranks among all Indiana cities for specific contaminants.
Water source & infrastructure
Where Marysville's water comes from
Marysville purchases its water supply from a regional wholesale provider rather than treating raw water directly.
Water quality depends on both the wholesaler's treatment standards and the condition of Marysville's local distribution pipes and storage facilities.
Purchased water systems are common in suburban areas and smaller communities that lack the infrastructure for independent treatment.
The system is operated by local government ownership and serves approximately 6,813 people through 1 water system.
Water systems serving Marysville
| System Name | PWSID | Population | Source |
|---|---|---|---|
| MARYSVILLE OTISCO NABB WATER CORP. | IN5210006 | 6,813 | GWP |
How Marysville compares
Full Indiana rankings →Marysville's score of 85.5/100 is above the average of 70/100 among major Indiana cities. It outscores 8 of 10 nearby cities.
Nearby cities
View Indiana rankings →About Marysville, IN
Wikipedia →Marysville is an unincorporated community in Oregon Township, Clark County, Indiana.
Learn more about your water
Guides and resources related to Marysville's water quality findings.
Explore water quality across Clark
Frequently asked questions
Is Marysville, IN tap water safe to drink?
Marysville's water quality earned a grade of A- (85.5/100). The water generally meets EPA standards and is considered safe for consumption. The city ranks #147 out of 414 cities tested in Indiana.
What contaminants are in Marysville's water?
Lead was measured at 0.0 ppb (90th percentile). 1 PFAS compound was detected. 14 violations are on record.
How is Marysville's water quality grade calculated?
The grade is based on four factors: violation history (40%), lead and copper levels (25%), PFAS contamination (25%), and regulatory compliance (10%). The score is also adjusted based on how complete the available data is. See our methodology page for full details.
Do I need a water filter in Marysville?
PFAS compounds exceed EPA limits — a reverse osmosis or activated carbon filter is recommended.
Where does Marysville's water come from?
Marysville's water is sourced from Purchased ground water. The city has 1 water system serving approximately 6,813 residents.
What health violations has Marysville's water system had?
Marysville has 3 health-based violations on record. The most recent violation was recorded in October 2015. Health-based violations mean the water exceeded EPA maximum contaminant levels (MCLs) for a regulated substance. 5 violations remain unresolved.
Is Marysville's groundwater at risk of contamination?
Marysville uses groundwater, which can be affected by naturally occurring contaminants like arsenic, radon, and nitrate, as well as agricultural runoff and industrial activity. The system has 14 violations on record that may relate to groundwater quality. Groundwater systems are generally less susceptible to surface contamination but should be monitored for emerging contaminants like PFAS.
How does Marysville's water compare to other cities?
Marysville ranks #147 out of 414 cities in Indiana (better than 64% of state cities) and #5272 out of 15744 cities nationally (67th percentile). The grade of A- reflects the combined assessment of violation history, lead and copper levels, PFAS contamination, and regulatory compliance.