Is Martinsville, IN Tap Water Safe to Drink?
Graded F — but Copper and Manganese were detected above EPA limits. Here's what's in the water and how to remove it. What to do next ↓
44.7/100
Martinsville, IN — Water Quality Report
Martinsville's drinking water received a grade of F (44.7 out of 100), indicating failing water quality. The city's 5 water systems serve approximately 32,790 residents using groundwater.
Lead levels were measured at 4.8 ppb (90th percentile), well within EPA limits. PFAS testing under UCMR 5 found no detectable forever chemicals.
The system has 155 violations on record, including 12 health-based violations. 31 remain unresolved.
What to know about Martinsville's water
Martinsville ranks #403 out of 414 cities in Indiana for water quality, placing it among the lowest-rated in the state.
Martinsville relies on groundwater, which is generally less vulnerable to surface contamination but can be affected by naturally occurring minerals like arsenic and nitrate, as well as agricultural and industrial runoff.
Hexavalent chromium (chromium-6) was detected at 0.06 µg/L in UCMR 3 testing. While below California's 10 µg/L limit and with no federal MCL set, residents sensitive to this contaminant may consider reverse osmosis filtration.
The system has seen 44 violations in the past five years, suggesting a pattern of compliance challenges that residents should monitor closely.
Water quality score
See methodology →Is Martinsville, IN water safe to drink?
Martinsville's drinking water has significant quality concerns based on EPA testing data. With a grade of F (44.7/100), the system has issues across multiple categories. A water filter is recommended for all residents. The city's 5 water systems serve approximately 32,790 residents using groundwater (wells).
Recent water quality updates for Martinsville
A timeline of significant water quality events, violations, and data updates.
Latest EPA compliance and testing data incorporated into Martinsville's water quality assessment. Grade: F (44.7/100).
Contaminants: Consumer Confidence Rule.
Federal disaster declaration (FEMA DR-4882). Flood event — may have impacted local water infrastructure.
Contaminants: Consumer Confidence Rule.
Contaminants: Atrazine, ETHYLENE DIBROMIDE, Dalapon.
Federal disaster declaration (FEMA DR-3238). Hurricane event — may have impacted local water infrastructure.
Key contaminant findings
Based on the most recent EPA sampling data for Martinsville's water supply.
Well within EPA limits.
Exceeds EPA action level. Copper can leach from household plumbing — flush taps for 30 seconds before drinking.
Violation history
Martinsville's water system has 155 total violations on record, including 12 health-based violations. 31 remain unresolved. 44 violations were issued in the last 5 years.
Flood & environmental risk
Morgan County has experienced 4 federally declared disasters since 1991. Flooding and severe storms can overwhelm water treatment plants, cause sewage overflows, and introduce agricultural runoff, bacteria, and sediment into drinking water supplies. Local water sources include White River.
Where does Martinsville's water come from?
Martinsville's drinking water comes from groundwater (wells), supplied by 5 water systems serving approximately 32,790 people. Groundwater is generally less susceptible to surface contamination but can contain naturally occurring contaminants like arsenic, radon, and nitrate. Nearby water bodies include White River (river).
What Martinsville residents can do
Recommended: NSF-certified water filter. This addresses the specific contaminants found in Martinsville's water.
Your water utility is required to publish an annual Consumer Confidence Report (CCR) with detailed testing results. Ask for the latest copy or check your utility's website.
Run cold water for 30 seconds before drinking, especially in the morning. Lead and copper leach from household plumbing when water sits in pipes.
Martinsville's area has a history of flooding. After severe weather, watch for boil water advisories from your local utility.
Data: EPA SDWIS, UCMR 5 (PFAS), FEMA, NOAA. Last updated May 2026.
Top contaminants to know
View all ↓Forever chemicals overview
National PFAS report →Violation summary
Violations & advisories
Top industrial polluters within 10 miles of Martinsville
Industrial polluters nearby
Reported releases to surface water by facilities near Martinsville, ranked by pounds discharged annually.
| Facility | Top chemical | To surface water (lbs/yr) | Distance |
|---|---|---|---|
ARCOSA LW HPB LLC MOORESVILLE, IN46158 | — | — | 7.5 mi |
Source: EPA Toxic Release Inventory (TRI) 2023
Superfund sites within 10 miles of Martinsville
Superfund sites nearby
Federally tracked hazardous-waste sites on the EPA National Priorities List. Proximity does not necessarily indicate tap-water contamination — the connection depends on hydrology and treatment.
- PIKE AND MULBERRY STREETS PCE PLUME1.0 mi
Source: EPA Superfund National Priorities List
Flood & disaster history
Morgan County has experienced 4 federally declared disasters since 1991. Flooding and severe weather can compromise water treatment infrastructure and introduce contaminants into drinking water supplies.
Recommended water filters
Based on contaminants detected in Martinsville's water supply, we recommend the following filter types.
Full contaminants report
| Contaminant | Detected Level | EPA Limit | Unit | Category | Status |
|---|---|---|---|---|---|
| Lead (90th percentile) LeadHeavy Metal A toxic heavy metal that can leach into drinking water from older pipes, solder, and fixtures. No amount of lead in water is considered safe. Health EffectsBrain and nervous system damage in children, kidney damage, high blood pressure, and reproductive problems in adults. EPA Limit15 ppb action level Common SourcesCorrosion of lead pipes, lead solder, brass faucets, and household plumbing. | 4.8 | 15 | ppb | Inorganic | Safe |
| Copper (90th percentile) CopperInorganic A metal that enters drinking water mainly through corrosion of copper plumbing. Small amounts are essential for health, but excess levels are harmful. Health EffectsGastrointestinal distress (nausea, vomiting, diarrhea) at short-term high levels; liver and kidney damage from long-term exposure. EPA Limit1.3 mg/L action level Common SourcesCorrosion of copper household plumbing, erosion of natural deposits. | 1.40 | 1.3 | mg/L | Inorganic | Over Limit |
| 11Cl-PF3OUdS | ND | HI | µg/L | PFAS | Not Detected |
| 4:2 FTS | ND | HI | µg/L | PFAS | Not Detected |
| 6:2 FTS 6:2 FTSPFAS A fluorotelomer sulfonate commonly found at sites contaminated with aqueous film-forming foam (AFFF) used in firefighting. Health EffectsPotential liver toxicity and endocrine disruption. Less studied but identified as a contaminant of concern. EPA LimitNo individual MCL (not yet regulated) Common SourcesFirefighting foam (AFFF), airports, military bases, and industrial facilities. | ND | HI | µg/L | PFAS | Not Detected |
| 8:2 FTS | ND | HI | µg/L | PFAS | Not Detected |
| 9Cl-PF3ONS | ND | HI | µg/L | PFAS | Not Detected |
| ADONA | ND | HI | µg/L | PFAS | Not Detected |
| HFPO-DA HFPO-DA (GenX)PFAS A replacement for PFOA in manufacturing, marketed as safer but still a persistent "forever chemical." Also known as GenX. Health EffectsLiver and kidney effects, reproductive toxicity, immune system effects, and potential cancer risk. EPA Limit10 ppt MCL Common SourcesFluoropolymer manufacturing (used as PFOA replacement), industrial wastewater discharge. | ND | 0.01 | µg/L | PFAS | Not Detected |
| lithium LithiumInorganic A naturally occurring alkali metal found in groundwater. Monitored under UCMR 5 to assess occurrence in drinking water. Health EffectsKidney effects at high doses. Low-level exposure effects under study; some research suggests neurological effects. EPA LimitNo MCL (monitoring only under UCMR 5) Common SourcesNatural mineral deposits, geothermal water, and industrial discharge. | ND | HI | µg/L | PFAS | Not Detected |
| NEtFOSAA | ND | HI | µg/L | PFAS | Not Detected |
| NFDHA | ND | HI | µg/L | PFAS | Not Detected |
| NMeFOSAA | ND | HI | µg/L | PFAS | Not Detected |
| PFBA PFBAPFAS One of the shortest-chain PFAS compounds. Very mobile in water and difficult to remove with standard filtration. Health EffectsThyroid effects, potential developmental toxicity. Shorter half-life in body than long-chain PFAS. EPA LimitNo individual MCL (not yet regulated) Common SourcesDegradation of longer-chain PFAS, industrial discharge, and firefighting foam. | ND | HI | µg/L | PFAS | Not Detected |
| PFBS PFBSPFAS A short-chain PFAS used as a replacement for PFOS. While it clears the body faster than long-chain PFAS, it still persists in the environment. Health EffectsThyroid effects, reproductive and developmental toxicity, kidney effects. EPA LimitPart of Hazard Index (1.0) Common SourcesIndustrial discharge, firefighting foam, and as a replacement chemical in manufacturing. | ND | HI | µg/L | PFAS | Not Detected |
| PFDA | ND | HI | µg/L | PFAS | Not Detected |
| PFDoA | ND | HI | µg/L | PFAS | Not Detected |
| PFEESA | ND | HI | µg/L | PFAS | Not Detected |
| PFHpA PFHpAPFAS A medium-chain PFAS compound found in various environmental samples. Less studied than PFOA/PFOS but still considered a contaminant of concern. Health EffectsLiver effects, potential developmental toxicity, and endocrine disruption. EPA LimitPart of Hazard Index (1.0) Common SourcesDegradation of longer-chain PFAS, industrial discharge, and contaminated water sources. | ND | HI | µg/L | PFAS | Not Detected |
| PFHpS | ND | HI | µg/L | PFAS | Not Detected |
| PFHxA PFHxAPFAS A short-chain PFAS replacement chemical widely used after manufacturers phased out longer-chain PFAS. Very commonly detected in water. Health EffectsLiver and kidney effects, potential thyroid disruption. Considered less toxic than long-chain PFAS but still persistent. EPA LimitNo individual MCL (not yet regulated) Common SourcesIndustrial processes, firefighting foam (AFFF), food packaging, and textile treatment. | ND | HI | µg/L | PFAS | Not Detected |
| PFHxS PFHxSPFAS A medium-chain PFAS found in firefighting foam and consumer products. It has a long half-life in the human body, similar to long-chain PFAS. Health EffectsImmune system effects, thyroid disruption, and potential reproductive and developmental harm. EPA LimitPart of Hazard Index (1.0) Common SourcesFirefighting foam (AFFF), waterproof textiles, food packaging, and industrial discharge. | ND | HI | µg/L | PFAS | Not Detected |
| PFMBA | ND | HI | µg/L | PFAS | Not Detected |
| PFMPA | ND | HI | µg/L | PFAS | Not Detected |
| PFNA PFNAPFAS A long-chain PFAS compound used in manufacturing fluoropolymers. It bioaccumulates in the body and is very persistent in the environment. Health EffectsDevelopmental effects, liver toxicity, immune suppression, and potential cancer risk. EPA LimitPart of Hazard Index (1.0) Common SourcesFluoropolymer manufacturing, industrial emissions, and contaminated water sources. | ND | HI | µg/L | PFAS | Not Detected |
| PFOA PFOAPFAS A long-chain PFAS ("forever chemical") once widely used in nonstick coatings and firefighting foam. It persists in the body and environment for years. Health EffectsLinked to kidney and testicular cancer, thyroid disease, elevated cholesterol, and reproductive issues. EPA Limit4.0 ppt MCL Common SourcesIndustrial discharge, firefighting foam (AFFF), nonstick cookware manufacturing, and contaminated groundwater. | ND | 0.004 | µg/L | PFAS | Not Detected |
| PFOS PFOSPFAS A long-chain PFAS compound historically used in stain-resistant coatings and firefighting foam. One of the most studied and persistent PFAS chemicals. Health EffectsLiver damage, immune system suppression, thyroid disruption, increased cholesterol, and potential cancer risk. EPA Limit4.0 ppt MCL Common SourcesFirefighting foam (AFFF), industrial sites, stain-resistant fabric treatments, and contaminated groundwater. | ND | 0.004 | µg/L | PFAS | Not Detected |
| PFPeA PFPeAPFAS A short-chain PFAS compound commonly detected in drinking water. One of the most frequently found PFAS in UCMR 5 monitoring. Health EffectsLess studied than PFOA/PFOS. Potential liver and thyroid effects. Research is ongoing. EPA LimitNo individual MCL (not yet regulated) Common SourcesIndustrial discharge, firefighting foam degradation, and consumer products. | ND | HI | µg/L | PFAS | Not Detected |
| PFPeS | ND | HI | µg/L | PFAS | Not Detected |
| PFTA | ND | HI | µg/L | PFAS | Not Detected |
| PFTrDA | ND | HI | µg/L | PFAS | Not Detected |
| PFUnA | ND | HI | µg/L | PFAS | Not Detected |
Lead level trend (90th percentile)
Copper level (90th percentile)
Latest reading: 1.400 mg/L (1997)
EPA action level: 1.3 mg/L
See how Martinsville compares by contaminant
Explore where Martinsville ranks among all Indiana cities for specific contaminants.
Water source & infrastructure
Where Martinsville's water comes from
Martinsville's drinking water is drawn from underground aquifers through wells.
Groundwater is naturally filtered through rock and soil layers, generally requiring less treatment than surface water. However, it can contain naturally occurring contaminants like arsenic, radon, and minerals.
Agricultural activity, septic systems, and industrial operations near well fields can introduce nitrates, pesticides, and volatile organic compounds.
The system is operated by local government ownership and serves approximately 32,790 people through 5 water systems.
Water bodies near Martinsville
Martinsville is located near 1 notable water body. These water bodies contribute to the regional watershed and may indirectly affect groundwater quality.
Water systems serving Martinsville
| System Name | PWSID | Population | Source |
|---|---|---|---|
| MARTINSVILLE WATER UTILITY | IN5255009 | 15,000 | GW |
| MORGAN COUNTY RURAL WATER COMPANY | IN5255010 | 8,800 | GW |
| CITIZENS WATER - MORGAN | IN5255019 | 5,705 | GWP |
| MAPLETURN UTILITIES, INC. | IN5255004 | 1,725 | GW |
| PAINTED HILLS UTILITY COMPANY | IN5255012 | 1,560 | GW |
How Martinsville compares
Full Indiana rankings →Martinsville's score of 44.7/100 is below the average of 70/100 among major Indiana cities. It outscores 1 of 10 nearby cities. 9 of 10 nearby cities score higher.
Nearby cities
View Indiana rankings →About Martinsville, IN
Wikipedia →Martinsville is a city in Washington Township, Morgan County, Indiana, United States. The population was 14,980 at the 2020 United States census. The city is the county seat of Morgan County.
Learn more about your water
Guides and resources related to Martinsville's water quality findings.
Explore water quality across Morgan
Frequently asked questions
Is Martinsville, IN tap water safe to drink?
Martinsville's water quality earned a grade of F (44.7/100). Significant issues have been found. A water filter is strongly recommended. The city ranks #403 out of 414 cities tested in Indiana.
What contaminants are in Martinsville's water?
Lead was measured at 4.8 ppb (90th percentile). No PFAS compounds were detected. 155 violations are on record.
How is Martinsville's water quality grade calculated?
The grade is based on four factors: violation history (40%), lead and copper levels (25%), PFAS contamination (25%), and regulatory compliance (10%). The score is also adjusted based on how complete the available data is. See our methodology page for full details.
Do I need a water filter in Martinsville?
Based on current data, basic filtration should suffice for additional peace of mind.
Where does Martinsville's water come from?
Martinsville's water is sourced from Groundwater. The city has 5 water systems serving approximately 32,790 residents.
What health violations has Martinsville's water system had?
Martinsville has 12 health-based violations on record. The most recent violation was recorded in October 2025. Health-based violations mean the water exceeded EPA maximum contaminant levels (MCLs) for a regulated substance. 31 violations remain unresolved.
Is Martinsville's groundwater at risk of contamination?
Martinsville uses groundwater, which can be affected by naturally occurring contaminants like arsenic, radon, and nitrate, as well as agricultural runoff and industrial activity. The system has 155 violations on record that may relate to groundwater quality. Groundwater systems are generally less susceptible to surface contamination but should be monitored for emerging contaminants like PFAS.
How does Martinsville's water compare to other cities?
Martinsville ranks #403 out of 414 cities in Indiana (better than 3% of state cities) and #14342 out of 15744 cities nationally (9th percentile). The grade of F reflects the combined assessment of violation history, lead and copper levels, PFAS contamination, and regulatory compliance.