WaterVerge

Is Lumberton, NC Tap Water Safe to Drink?

Graded B — but PFOS was detected above EPA limits. Here's what's in the water and how to remove it. What to do next ↓

24K residents served 1 water system PWSID: NC0378010
Overall Score
78.1 / 100
Violations
5 active
Last Updated
May 2026
Source
Surface water
#174 of 417 in North Carolina Top 56% nationally
Local Government
High data confidence
Reviewed by WaterVerge Editorial Team · Last updated May 2026
BGRADE
Water Quality Grade
78.1/100
waterverge.com
B 78.1/100

Lumberton, NC — Water Quality Report

Lumberton's drinking water received a grade of B (78.1 out of 100), indicating good water quality. The city's 1 water system serves approximately 24,460 residents using surface water.

Lead levels were measured at 0.0 ppb (90th percentile), well within EPA limits. UCMR 5 testing detected 4 PFAS compounds, with levels exceeding EPA maximum contaminant levels in the water supply.

The system has 10 violations on record, including 2 health-based violations. 5 remain unresolved.

Data last updated: May 2026 · Source: EPA SDWIS, UCMR 5
Analysis

What to know about Lumberton's water

Lumberton ranks #174 out of 417 cities in North Carolina for water quality, placing it mid-range in the state.

The city draws from surface water sources, which are more susceptible to seasonal runoff and agricultural contamination, requiring extensive multi-barrier treatment including coagulation, filtration, and disinfection.

Of particular concern: PFAS "forever chemical" levels exceed the 2024 EPA maximum contaminant levels. These synthetic compounds don't break down naturally and require specialized filtration such as reverse osmosis or granular activated carbon.

Hexavalent chromium (chromium-6) was detected at 0.08 µg/L in UCMR 3 testing. While below California's 10 µg/L limit and with no federal MCL set, residents sensitive to this contaminant may consider reverse osmosis filtration.

Quality Breakdown

Water quality score

See methodology →
78.1 out of 100 Grade B
A: 90-100
B: 74-89
C: 60-73
F: <50
How is this calculated?
Violations
38.8/45
B
Historical violation record including health-based and monitoring violations.
Lead & Copper
20/20
A
Lead at 0.0 ppb (90th percentile).
Contaminants
12.3/20
C
4 PFAS compounds detected.
Compliance
3/10
F
Monitoring and reporting compliance with EPA regulations.
Source Risk
4/5
B
Water source: Surface water.
Water Safety

Is Lumberton, NC water safe to drink?

Concerns Identified

Lumberton's drinking water has significant quality concerns based on EPA testing data. With a grade of B (78.1/100), the system has issues across multiple categories. A water filter is recommended for all residents. The city's 1 water system serves approximately 24,460 residents using surface water (rivers, lakes, or reservoirs).

5
Active Violations
0.0 ppb
Lead (90th %ile)
4 compounds
PFAS Detected
10 events
Disaster History

Recent water quality updates for Lumberton

A timeline of significant water quality events, violations, and data updates.

PFAS
4 PFAS "forever chemical" compounds detected

PFAS levels exceed EPA maximum contaminant levels. Reverse osmosis or activated carbon filtration recommended.

Update
Water quality data updated

Latest EPA compliance and testing data incorporated into Lumberton's water quality assessment. Grade: B (78.1/100).

Violation
2 drinking water violations recorded

1 health-based. Contaminants: LEAD AND COPPER RULE REVISIONS.

Disaster
HURRICANE IAN

Federal disaster declaration (FEMA DR-3586). Hurricane event — may have impacted local water infrastructure.

Disaster
HURRICANE ISAIAS

Federal disaster declaration (FEMA DR-3534). Hurricane event — may have impacted local water infrastructure.

Violation
1 drinking water violation recorded

1 health-based. Contaminants: Total Haloacetic Acids (HAA5).

Key contaminant findings

Based on the most recent EPA sampling data for Lumberton's water supply.

Lead Within Limits
Detected: 0.0 ppb Limit: 15 ppb (EPA Action Level)

Well within EPA limits.

PFAS (4 compounds) Exceeds Limit
Detected: Highest: PFOS at 0.0079 µg/L Limit: 0.004 µg/L (EPA MCL)

PFAS "forever chemicals" exceed EPA maximum contaminant levels. Reverse osmosis or granular activated carbon filtration strongly recommended.

PFAS "forever chemicals" detected

UCMR 5 testing found 4 PFAS compounds in Lumberton's water supply. PFAS are synthetic chemicals that persist indefinitely in the environment and the human body.

Compound Level EPA MCL Status
PFOS 0.0079 µg/L 0.004 µg/L Over MCL
PFOA 0.0057 µg/L 0.004 µg/L Over MCL
PFPeA 0.0044 µg/L 0.004 µg/L Within Limit
PFHxA 0.0033 µg/L 0.004 µg/L Within Limit

Violation history

Lumberton's water system has 10 total violations on record, including 2 health-based violations. 5 remain unresolved. 2 violations were issued in the last 5 years.

RPTTTMCLMROther
Most recent violations:
Oct 2024 LEAD AND COPPER RULE REVISIONS Open
Oct 2024 LEAD AND COPPER RULE REVISIONS Open
Jul 2008 Total Haloacetic Acids (HAA5) Resolved
May 2006 Surface Water Treatment Rule Resolved
Apr 2006 Surface Water Treatment Rule Resolved

Flood & environmental risk

Robeson County has experienced 10 federally declared disasters since 2004. Flooding and severe storms can overwhelm water treatment plants, cause sewage overflows, and introduce agricultural runoff, bacteria, and sediment into drinking water supplies. Local water sources include Lumber River.

HURRICANE IAN
Hurricane FEMA DR-3586
HURRICANE ISAIAS
Hurricane FEMA DR-3534
HURRICANE DORIAN
Hurricane FEMA DR-4465

Where does Lumberton's water come from?

Lumberton's drinking water comes from surface water (rivers, lakes, or reservoirs), supplied by 1 water system serving approximately 24,460 people. Surface water sources are more susceptible to contamination from runoff, industrial discharge, and algal blooms, requiring extensive treatment. Nearby water bodies include Lumber River (river).

What Lumberton residents can do

Install a water filter

Recommended: Reverse osmosis system. This addresses the specific contaminants found in Lumberton's water.

Request your utility's CCR

Your water utility is required to publish an annual Consumer Confidence Report (CCR) with detailed testing results. Ask for the latest copy or check your utility's website.

Monitor alerts during storms

Lumberton's area has a history of flooding. After severe weather, watch for boil water advisories from your local utility.

Data: EPA SDWIS, UCMR 5 (PFAS), FEMA, NOAA. Last updated May 2026.

Contaminant Alerts

Top contaminants to know

View all ↓
Lead (90th percentile)
Inorganic / Heavy Metal
Safe
0.0 ppb
EPA Action Level: 15 ppb · 0% of limit
Safe Level
PFOS
PFAS / Forever Chemical
Over MCL
0.0079 µg/L
EPA MCL: 0.004 µg/L · +20% over limit
Exceeds MCL
HAA5 (Disinfection Byproducts)
Disinfection Byproduct
Safe
23.1 µg/L
EPA MCL: 60 µg/L · 39% of limit
Within LimitUCMR 4 DataHAA6Br: 5.4 µg/LHAA9: 28.3 µg/L
Chromium-6 (Hexavalent Chromium)
Inorganic
Detected
0.08 µg/L
CA MCL (no federal MCL): 10 µg/L · 1% of limit
DetectedUCMR 3 Data
Strontium
Inorganic
Detected
91.5 µg/L
EPA Health Ref Level: 1,500 µg/L · 6% of limit
DetectedUCMR 3 Data
Manganese
Inorganic
Detected
21.1 µg/L
EPA Secondary MCL: 50 µg/L · 42% of limit
DetectedUCMR 4 Data
Vanadium
Inorganic
Detected
0.50 µg/L
EPA Short-term HA: 21 µg/L · 2% of limit
DetectedUCMR 3 Data
PFAS Testing

Forever chemicals overview

National PFAS report →
30
Compounds tested
4
Detected
2
Exceed EPA MCL
3.40
Hazard Index
PFOS max: 0.0079 µg/L PFOA max: 0.0057 µg/L
Compliance Record

Violation summary

10
Total violations
2
Health-based
5
Active / unresolved
Oct 2024
Most recent violation
Compliance Record

Violations & advisories

10 Total
5 Active
2 Health-based
5 Resolved
Violations by category
Consumer Confidence Rule
3
Lead and Copper Rule Revisions
2
Surface Water Treatment Rule
2
Nitrate Rule
2
Stage 1 Disinfectants and Disinfection Byproducts Rule
1
Oct 2024 Active
LEAD AND COPPER RULE REVISIONS
Reporting
Reporting 0
Oct 2024 Active
LEAD AND COPPER RULE REVISIONS
Treatment Technique
Health-Based Health 0
Jul 2005 Active
Consumer Confidence Rule
Other Violation 0
Jul 2001 Active
Consumer Confidence Rule
Other Violation 0
Oct 1999 Active
Consumer Confidence Rule
Other Violation 0
Jul 2008 Resolved
Total Haloacetic Acids (HAA5)
Max Contaminant Level
Health-Based Health Resolved Sep 2008
May 2006 Resolved
Surface Water Treatment Rule
Monitoring & Reporting
Monitoring & Reporting Resolved May 2006
Apr 2006 Resolved
Surface Water Treatment Rule
Monitoring & Reporting
Monitoring & Reporting Resolved Apr 2006
Jan 1999 Resolved
Nitrate
Monitoring & Reporting
Monitoring & Reporting Resolved Dec 1999
Jan 1999 Resolved
Nitrite
Monitoring & Reporting
Monitoring & Reporting Resolved Dec 1999
Industrial pollution

Top industrial polluters within 10 miles of Lumberton

Industrial polluters nearby

Reported releases to surface water by facilities near Lumberton, ranked by pounds discharged annually.

Total reported releases to surface water: 0 lbs

FacilityTop chemicalTo surface water (lbs/yr)Distance
S&W LUMBERTON PLANT
Nonmetallic Mineral Product · TITAN AMERICA LLC
LUMBERTON, NC28358
Lead02.7 mi
LINDSEY CAMPBELL OIL CO
Petroleum Bulk Terminals · CAMPBELL OIL CO
LUMBERTON, NC28358
1.1 mi
ELKAY PLUMBING PRODUCTS CO
Fabricated Metals · ZURN ELKAY WATER SOLUTIONS CORP
LUMBERTON, NC28360
3.2 mi
TRINITY FROZEN FOODS LLC
Food · NA
PEMBROKE, NC28372
9.9 mi

Source: EPA Toxic Release Inventory (TRI) 2023

Environmental Risk

Drought conditions

D3 — extreme drought

Robeson County is currently in D3 (extreme drought) per the U.S. Drought Monitor (week of May 5, 2026). Drought can elevate disinfection-byproduct (TTHM/HAA5) levels and taste/odor issues as utilities draw from lower reservoirs.

14
Weeks at D2+ (current streak)
18.1%
Months in D2+ (last 30y)
14
Weeks at D2+ (last 5y)

Source: U.S. Drought Monitor, updated weekly by NDMC, USDA, and NOAA.

Environmental Risk

Flood & disaster history

10
Declared disasters
Oct 2022
Most recent
Hurricane
Most common type

Robeson County has experienced 10 federally declared disasters since 2004. Flooding and severe weather can compromise water treatment infrastructure and introduce contaminants into drinking water supplies.

Oct 2022
HURRICANE IAN
Hurricane FEMA #3586
Aug 2020
HURRICANE ISAIAS
Hurricane FEMA #3534
Oct 2019
HURRICANE DORIAN
Hurricane FEMA #4465
Sep 2019
HURRICANE DORIAN
Hurricane FEMA #3423
Sep 2018
HURRICANE FLORENCE
Hurricane FEMA #4393
Sep 2018
HURRICANE FLORENCE
Hurricane FEMA #3401

Recommended water filters

Based on contaminants detected in Lumberton's water supply, we recommend the following filter types.

🧪
For PFAS
Reverse Osmosis or Activated Carbon Block
PFAS compounds exceed EPA maximum contaminant levels

Full contaminants report

Contaminant Detected Level EPA Limit Unit Category Status
Lead (90th percentile) 0.0 15 ppb Inorganic Safe
11Cl-PF3OUdS ND HI µg/L PFAS Not Detected
4:2 FTS ND HI µg/L PFAS Not Detected
6:2 FTS ND HI µg/L PFAS Not Detected
8:2 FTS ND HI µg/L PFAS Not Detected
9Cl-PF3ONS ND HI µg/L PFAS Not Detected
ADONA ND HI µg/L PFAS Not Detected
HFPO-DA ND 0.01 µg/L PFAS Not Detected
lithium ND HI µg/L PFAS Not Detected
NEtFOSAA ND HI µg/L PFAS Not Detected
NFDHA ND HI µg/L PFAS Not Detected
NMeFOSAA ND HI µg/L PFAS Not Detected
PFBA ND HI µg/L PFAS Not Detected
PFBS ND HI µg/L PFAS Not Detected
PFDA ND HI µg/L PFAS Not Detected
PFDoA ND HI µg/L PFAS Not Detected
PFEESA ND HI µg/L PFAS Not Detected
PFHpA ND HI µg/L PFAS Not Detected
PFHpS ND HI µg/L PFAS Not Detected
PFHxA 0.003 HI µg/L PFAS Detected
PFHxS ND HI µg/L PFAS Not Detected
PFMBA ND HI µg/L PFAS Not Detected
PFMPA ND HI µg/L PFAS Not Detected
PFNA ND HI µg/L PFAS Not Detected
PFOA 0.006 0.004 µg/L PFAS Over MCL
PFOS 0.008 0.004 µg/L PFAS Over MCL
PFPeA 0.004 HI µg/L PFAS Detected
PFPeS ND HI µg/L PFAS Not Detected
PFTA ND HI µg/L PFAS Not Detected
PFTrDA ND HI µg/L PFAS Not Detected
PFUnA ND HI µg/L PFAS Not Detected
Data source: EPA SDWIS, UCMR 5, local utility CCR.

Lead level trend (90th percentile)

EPA action level: 15 ppb
Lead has decreased by 3.0 ppb from 1992 (3.0 ppb) to 2025 (0.0 ppb).
Infrastructure

Water source & infrastructure

Primary Source
Surface Water
Operator
Local Government
Population Served
24,460
Water Systems
1
Water Source

Where Lumberton's water comes from

Surface Water

Lumberton's drinking water comes primarily from surface water sources such as rivers, lakes, or reservoirs.

Surface water systems require multi-stage treatment including coagulation, sedimentation, filtration, and disinfection to meet EPA Safe Drinking Water Act standards.

These sources can be impacted by seasonal changes, stormwater runoff, upstream agriculture, and industrial discharge.

The system is operated by local government ownership and serves approximately 24,460 people through 1 water system.

Local Hydrology

Water bodies near Lumberton

Lumberton is located near 1 notable water body. As a surface water system, these water bodies may directly influence the city's drinking water supply.

Lumber River
river
Infrastructure

Water systems serving Lumberton

System Name PWSID Population Source
LUMBERTON, CITY OF NC0378010 24,460 SW
Regional Comparison

How Lumberton compares

Full North Carolina rankings →

Lumberton's score of 78.1/100 is above the average of 43/100 among major North Carolina cities. It outscores 9 of 10 nearby cities.

Lumberton (this city)
78.1
Charlotte
36.5
Raleigh
30.7
Durham
36.6
Greensboro
33.5
North Carolina avg
43
City Profile

About Lumberton, NC

Wikipedia →

Lumberton is a city in and the county seat of Robeson County, North Carolina, United States. As of 2020, its population was 19,025.

Economic Profile
$41,314
Median Income
$129,666
Median Home Value
$758/mo
Median Rent
6.7%
Unemployment
Community
37.2
Median Age
415
People / sq mi
21.5%
College Educated
46.8%
Homeownership
Share this reportHelp others learn about their water quality
WhatsAppXFacebookLinkedInEmail

Frequently asked questions

Is Lumberton, NC tap water safe to drink?

Lumberton's water quality earned a grade of B (78.1/100). Some concerns have been identified. Consider a water filter for an extra layer of protection. The city ranks #174 out of 417 cities tested in North Carolina.

What contaminants are in Lumberton's water?

Lead was measured at 0.0 ppb (90th percentile). 4 PFAS compounds were detected. 10 violations are on record.

How is Lumberton's water quality grade calculated?

The grade is based on four factors: violation history (40%), lead and copper levels (25%), PFAS contamination (25%), and regulatory compliance (10%). The score is also adjusted based on how complete the available data is. See our methodology page for full details.

Do I need a water filter in Lumberton?

PFAS compounds exceed EPA limits — a reverse osmosis or activated carbon filter is recommended.

Where does Lumberton's water come from?

Lumberton's water is sourced from Surface water. The city has 1 water system serving approximately 24,460 residents.

What health violations has Lumberton's water system had?

Lumberton has 2 health-based violations on record. The most recent violation was recorded in October 2024. Health-based violations mean the water exceeded EPA maximum contaminant levels (MCLs) for a regulated substance. 5 violations remain unresolved.

Why does Lumberton have so many PFAS compounds in its water?

4 different PFAS "forever chemical" compounds were detected in Lumberton's water supply during UCMR 5 testing. PFAS contamination often originates from proximity to military installations (AFFF firefighting foam), airports, industrial manufacturing sites, or wastewater treatment facilities. Some levels exceed the 2024 EPA maximum contaminant levels — a reverse osmosis or NSF-certified activated carbon filter is strongly recommended.

How does Lumberton's water compare to other cities?

Lumberton ranks #174 out of 417 cities in North Carolina (better than 58% of state cities) and #8777 out of 15744 cities nationally (44th percentile). The grade of B reflects the combined assessment of violation history, lead and copper levels, PFAS contamination, and regulatory compliance.