WaterVerge

Is Franklin, CT Tap Water Safe to Drink?

Graded F — but PFOS and Chlorate were detected above EPA limits. Here's what's in the water and how to remove it. What to do next ↓

38K residents served 7 water systems PWSID: CT1040011
Overall Score
41.9 / 100
Violations
68 active
Last Updated
May 2026
Source
Surface water
#128 of 158 in Connecticut Top 95% nationally
Local Government
High data confidence
Reviewed by WaterVerge Editorial Team · Last updated May 2026
FGRADE
Water Quality Grade
41.9/100
waterverge.com
F 41.9/100

Franklin, CT — Water Quality Report

Franklin's drinking water received a grade of F (41.9 out of 100), indicating failing water quality. The city's 7 water systems serve approximately 37,593 residents using surface water.

Lead levels were measured at 1.5 ppb (90th percentile), well within EPA limits. UCMR 5 testing detected 5 PFAS compounds, with levels exceeding EPA maximum contaminant levels in the water supply.

The system has 457 violations on record, including 32 health-based violations. 68 remain unresolved.

Data last updated: May 2026 · Source: EPA SDWIS, UCMR 5
Analysis

What to know about Franklin's water

Franklin ranks #128 out of 158 cities in Connecticut for water quality, placing it among the lowest-rated in the state.

The city draws from surface water sources, which are more susceptible to seasonal runoff and agricultural contamination, requiring extensive multi-barrier treatment including coagulation, filtration, and disinfection.

Of particular concern: PFAS "forever chemical" levels exceed the 2024 EPA maximum contaminant levels. These synthetic compounds don't break down naturally and require specialized filtration such as reverse osmosis or granular activated carbon.

Haloacetic acid (HAA5) levels were elevated at 35.1 µg/L in UCMR 4 testing, though below the 60 µg/L EPA limit. Activated carbon filtration can help reduce these disinfection byproducts.

Hexavalent chromium (chromium-6) was detected at 0.07 µg/L in UCMR 3 testing. While below California's 10 µg/L limit and with no federal MCL set, residents sensitive to this contaminant may consider reverse osmosis filtration.

The system has seen 29 violations in the past five years, suggesting a pattern of compliance challenges that residents should monitor closely.

Quality Breakdown

Water quality score

See methodology →
41.9 out of 100 Grade F
A: 90-100
B: 74-89
C: 60-73
F: <50
How is this calculated?
Violations
0/45
F
Historical violation record including health-based and monitoring violations.
Lead & Copper
20/20
A
Lead at 1.5 ppb (90th percentile).
Contaminants
9.9/20
D
5 PFAS compounds detected.
Compliance
8/10
B
Monitoring and reporting compliance with EPA regulations.
Source Risk
4/5
B
Water source: Surface water.
Water Safety

Is Franklin, CT water safe to drink?

Concerns Identified

Franklin's drinking water has significant quality concerns based on EPA testing data. With a grade of F (41.9/100), the system has issues across multiple categories. A water filter is recommended for all residents. The city's 7 water systems serve approximately 37,593 residents using surface water (rivers, lakes, or reservoirs).

68
Active Violations
1.5 ppb
Lead (90th %ile)
5 compounds
PFAS Detected

Recent water quality updates for Franklin

A timeline of significant water quality events, violations, and data updates.

PFAS
5 PFAS "forever chemical" compounds detected

PFAS levels exceed EPA maximum contaminant levels. Reverse osmosis or activated carbon filtration recommended.

Update
Water quality data updated

Latest EPA compliance and testing data incorporated into Franklin's water quality assessment. Grade: F (41.9/100).

Violation
20 drinking water violations recorded

Contaminants: Ethylbenzene, Styrene, DICHLOROMETHANE.

Violation
1 drinking water violation recorded

Contaminants: Lead and Copper Rule.

Violation
6 drinking water violations recorded

3 health-based. Contaminants: LEAD AND COPPER RULE REVISIONS.

Key contaminant findings

Based on the most recent EPA sampling data for Franklin's water supply.

Lead Within Limits
Detected: 1.5 ppb Limit: 15 ppb (EPA Action Level)

Well within EPA limits.

PFAS (5 compounds) Exceeds Limit
Detected: Highest: PFOS at 0.0162 µg/L Limit: 0.004 µg/L (EPA MCL)

PFAS "forever chemicals" exceed EPA maximum contaminant levels. Reverse osmosis or granular activated carbon filtration strongly recommended.

PFAS "forever chemicals" detected

UCMR 5 testing found 5 PFAS compounds in Franklin's water supply. PFAS are synthetic chemicals that persist indefinitely in the environment and the human body.

Compound Level EPA MCL Status
PFOS 0.0162 µg/L 0.004 µg/L Over MCL
PFHxS 0.0125 µg/L 0.004 µg/L Within Limit
PFOA 0.0067 µg/L 0.004 µg/L Over MCL
PFBS 0.0060 µg/L 0.004 µg/L Within Limit

Violation history

Franklin's water system has 457 total violations on record, including 32 health-based violations. 68 remain unresolved. 29 violations were issued in the last 5 years.

MRRPTTTOtherMCL
Most recent violations:
Apr 2025 Ethylbenzene Resolved
Apr 2025 Styrene Resolved
Apr 2025 DICHLOROMETHANE Resolved
Apr 2025 p-Dichlorobenzene Resolved
Apr 2025 Vinyl chloride Resolved

Where does Franklin's water come from?

Franklin's drinking water comes from surface water (rivers, lakes, or reservoirs), supplied by 7 water systems serving approximately 37,593 people. Surface water sources are more susceptible to contamination from runoff, industrial discharge, and algal blooms, requiring extensive treatment. Nearby water bodies include Little River (river), Shetucket River (river), Quinebaug River (river), Yantic River (river).

What Franklin residents can do

Install a water filter

Recommended: Reverse osmosis system. This addresses the specific contaminants found in Franklin's water.

Request your utility's CCR

Your water utility is required to publish an annual Consumer Confidence Report (CCR) with detailed testing results. Ask for the latest copy or check your utility's website.

Data: EPA SDWIS, UCMR 5 (PFAS), FEMA, NOAA. Last updated May 2026.

Contaminant Alerts

Top contaminants to know

View all ↓
Lead (90th percentile)
Inorganic / Heavy Metal
Safe
1.5 ppb
EPA Action Level: 15 ppb · 10% of limit
Safe Level
PFOS
PFAS / Forever Chemical
Over MCL
0.0162 µg/L
EPA MCL: 0.004 µg/L · +20% over limit
Exceeds MCL
HAA5 (Disinfection Byproducts)
Disinfection Byproduct
Safe
35.1 µg/L
EPA MCL: 60 µg/L · 59% of limit
Within LimitUCMR 4 DataHAA6Br: 5.9 µg/LHAA9: 41.0 µg/L
Chromium-6 (Hexavalent Chromium)
Inorganic
Detected
0.07 µg/L
CA MCL (no federal MCL): 10 µg/L · 1% of limit
DetectedUCMR 3 Data
Strontium
Inorganic
Detected
206.0 µg/L
EPA Health Ref Level: 1,500 µg/L · 14% of limit
DetectedUCMR 3 Data
Manganese
Inorganic
Detected
6.1 µg/L
EPA Secondary MCL: 50 µg/L · 12% of limit
DetectedUCMR 4 Data
Chlorate
Disinfection Byproduct
Over HA
598.0 µg/L
EPA Lifetime HA: 210 µg/L · +20% over limit
Over Health AdvisoryUCMR 3 Data
PFAS Testing

Forever chemicals overview

National PFAS report →
30
Compounds tested
5
Detected
2
Exceed EPA MCL
5.72
Hazard Index
PFOS max: 0.0162 µg/L PFOA max: 0.0067 µg/L
Compliance Record

Violation summary

457
Total violations
32
Health-based
68
Active / unresolved
Apr 2025
Most recent violation
Compliance Record

Violations & advisories

457 Total
68 Active
32 Health-based
389 Resolved
7 SNC
Violations by category
Volatile Organic Chemicals
135
Synthetic Organic Chemicals
73
Inorganic Chemicals
50
Miscellaneous Other Rules
42
Consumer Confidence Rule
35
Dec 2024 Active
Lead and Copper Rule
Monitoring & Reporting
Monitoring & Reporting 0
Oct 2024 Active
LEAD AND COPPER RULE REVISIONS
Reporting
Reporting 0
Oct 2024 Active
LEAD AND COPPER RULE REVISIONS
Treatment Technique
Health-Based Health 0
Oct 2024 Active
LEAD AND COPPER RULE REVISIONS
Reporting
Reporting 0
Oct 2024 Active
LEAD AND COPPER RULE REVISIONS
Treatment Technique
Health-Based Health 0
Oct 2024 Active
LEAD AND COPPER RULE REVISIONS
Treatment Technique
Health-Based Health 0
Oct 2024 Active
LEAD AND COPPER RULE REVISIONS
Reporting
Reporting 0
Aug 2022 Active
Consumer Confidence Rule
Other Violation 0
Aug 2021 Active
Consumer Confidence Rule
Other Violation 0
Sep 2020 Active
Lead and Copper Rule
Monitoring & Reporting
Monitoring & Reporting 0
Aug 2020 Active
Consumer Confidence Rule
Other Violation 0
Jul 2020 Active
Consumer Confidence Rule
Other Violation 0
Jul 2020 Active
Consumer Confidence Rule
Other Violation 0
Jan 2019 Active
Revised Total Coliform Rule
Reporting
Reporting 0
Dec 2018 Active
Lead and Copper Rule
Monitoring & Reporting
Monitoring & Reporting 0
Aug 2018 Active
Consumer Confidence Rule
Other Violation 0
Jul 2018 Active
Consumer Confidence Rule
Other Violation 0
Dec 2017 Active
Lead and Copper Rule
Monitoring & Reporting
Monitoring & Reporting 0
Aug 2017 Active
Consumer Confidence Rule
Other Violation 0
Jul 2017 Active
Consumer Confidence Rule
Other Violation 0
Showing 20 of 457 violations

Recommended water filters

Based on contaminants detected in Franklin's water supply, we recommend the following filter types.

🧪
For PFAS
Reverse Osmosis or Activated Carbon Block
PFAS compounds exceed EPA maximum contaminant levels

Full contaminants report

Contaminant Detected Level EPA Limit Unit Category Status
Lead (90th percentile) 1.5 15 ppb Inorganic Safe
11Cl-PF3OUdS ND HI µg/L PFAS Not Detected
4:2 FTS ND HI µg/L PFAS Not Detected
6:2 FTS ND HI µg/L PFAS Not Detected
8:2 FTS ND HI µg/L PFAS Not Detected
9Cl-PF3ONS ND HI µg/L PFAS Not Detected
ADONA ND HI µg/L PFAS Not Detected
HFPO-DA ND 0.01 µg/L PFAS Not Detected
lithium ND HI µg/L PFAS Not Detected
NEtFOSAA ND HI µg/L PFAS Not Detected
NFDHA ND HI µg/L PFAS Not Detected
NMeFOSAA ND HI µg/L PFAS Not Detected
PFBA ND HI µg/L PFAS Not Detected
PFBS 0.006 HI µg/L PFAS Detected
PFDA ND HI µg/L PFAS Not Detected
PFDoA ND HI µg/L PFAS Not Detected
PFEESA ND HI µg/L PFAS Not Detected
PFHpA ND HI µg/L PFAS Not Detected
PFHpS ND HI µg/L PFAS Not Detected
PFHxA ND HI µg/L PFAS Not Detected
PFHxS 0.013 HI µg/L PFAS Detected
PFMBA ND HI µg/L PFAS Not Detected
PFMPA ND HI µg/L PFAS Not Detected
PFNA ND HI µg/L PFAS Not Detected
PFOA 0.007 0.004 µg/L PFAS Over MCL
PFOS 0.016 0.004 µg/L PFAS Over MCL
PFPeA 0.004 HI µg/L PFAS Detected
PFPeS ND HI µg/L PFAS Not Detected
PFTA ND HI µg/L PFAS Not Detected
PFTrDA ND HI µg/L PFAS Not Detected
PFUnA ND HI µg/L PFAS Not Detected
Data source: EPA SDWIS, UCMR 5, local utility CCR.

Lead level trend (90th percentile)

EPA action level: 15 ppb
Lead has decreased by 0.0 ppb from 2002 (0.0 ppb) to 2025 (0.0 ppb).
Infrastructure

Water source & infrastructure

Primary Source
Surface Water
Operator
Local Government
Population Served
37,593
Water Systems
7
Source breakdown
Groundwater
6
Surface Water
1
Water Source

Where Franklin's water comes from

Surface Water

Franklin's drinking water comes primarily from surface water sources such as rivers, lakes, or reservoirs.

Surface water systems require multi-stage treatment including coagulation, sedimentation, filtration, and disinfection to meet EPA Safe Drinking Water Act standards.

These sources can be impacted by seasonal changes, stormwater runoff, upstream agriculture, and industrial discharge.

The system is operated by local government ownership and serves approximately 37,593 people through 7 water systems.

Local Hydrology

Water bodies near Franklin

Franklin is located near 4 notable water bodies. As a surface water system, these water bodies may directly influence the city's drinking water supply.

Little River
river
Shetucket River
river
Quinebaug River
river
Yantic River
river
Infrastructure

Water systems serving Franklin

System Name PWSID Population Source
NORWICH PUBLIC UTILITIES CT1040011 36,163 SW
CTWC - AMSTON LAKE DIVISION CT0670331 910 GW
CAREFREE HOMEOWNERS ASSOCIATION CT0710011 172 GW
AQUARION-LEBANON CT0710021 149 GW
HILLSIDE CONDOMINIUMS CT0670051 96 GW
CTWC - LEBANON ELDERLY DIV. CT0711071 67 GW
VILLAGE HILL APARTMENTS CT0711001 36 GW
Regional Comparison

How Franklin compares

Full Connecticut rankings →

Franklin's score of 41.9/100 is below the average of 47/100 among major Connecticut cities. It outscores 5 of 10 nearby cities.

Franklin (this city)
41.9
Ansonia
49.4
Ansonia
33.5
Ansonia
34.5
Berlin
41
Connecticut avg
47
City Profile

About Franklin, CT

Wikipedia →

Norwich is a city in New London County, Connecticut, United States. The Yantic, Shetucket, and Quinebaug Rivers flow into the city and form its harbor, from which the Thames River flows south to Long Island Sound. The city is part of the Southeastern Connecticut Planning Region. The population was 40,125 at the 2020 United States Census. The Norwich–New London metropolitan area includes 21 towns and 274,055 people.

Share this reportHelp others learn about their water quality
WhatsAppXFacebookLinkedInEmail

Frequently asked questions

Is Franklin, CT tap water safe to drink?

Franklin's water quality earned a grade of F (41.9/100). Significant issues have been found. A water filter is strongly recommended. The city ranks #128 out of 158 cities tested in Connecticut.

What contaminants are in Franklin's water?

Lead was measured at 1.5 ppb (90th percentile). 5 PFAS compounds were detected. 457 violations are on record.

How is Franklin's water quality grade calculated?

The grade is based on four factors: violation history (40%), lead and copper levels (25%), PFAS contamination (25%), and regulatory compliance (10%). The score is also adjusted based on how complete the available data is. See our methodology page for full details.

Do I need a water filter in Franklin?

PFAS compounds exceed EPA limits — a reverse osmosis or activated carbon filter is recommended.

Where does Franklin's water come from?

Franklin's water is sourced from Surface water. The city has 7 water systems serving approximately 37,593 residents.

What health violations has Franklin's water system had?

Franklin has 32 health-based violations on record. The most recent violation was recorded in April 2025. Health-based violations mean the water exceeded EPA maximum contaminant levels (MCLs) for a regulated substance. 68 violations remain unresolved.

Why does Franklin have so many PFAS compounds in its water?

5 different PFAS "forever chemical" compounds were detected in Franklin's water supply during UCMR 5 testing. PFAS contamination often originates from proximity to military installations (AFFF firefighting foam), airports, industrial manufacturing sites, or wastewater treatment facilities. Some levels exceed the 2024 EPA maximum contaminant levels — a reverse osmosis or NSF-certified activated carbon filter is strongly recommended.

How does Franklin's water compare to other cities?

Franklin ranks #128 out of 158 cities in Connecticut (better than 19% of state cities) and #14928 out of 15744 cities nationally (5th percentile). The grade of F reflects the combined assessment of violation history, lead and copper levels, PFAS contamination, and regulatory compliance.