Is Jay, OK Tap Water Safe to Drink?
Graded D — but Copper was detected above EPA limits. Here's what's in the water and how to remove it. What to do next ↓
45/100
waterverge.com Jay, OK — Water Quality Report
Jay's drinking water received a grade of D (45 out of 100), indicating poor water quality. The city's 4 water systems serve approximately 4,020 residents using surface water.
Lead levels were measured at 1.1 ppb (90th percentile), well within EPA limits. This system has not yet been tested for PFAS under the EPA UCMR 5 program.
The system has 247 violations on record, including 87 health-based violations. 35 remain unresolved.
What to know about Jay's water
Jay ranks #313 out of 358 cities in Oklahoma for water quality, placing it among the lowest-rated in the state.
The city draws from surface water sources, which are more susceptible to seasonal runoff and agricultural contamination, requiring extensive multi-barrier treatment including coagulation, filtration, and disinfection.
The system has seen 25 violations in the past five years, suggesting a pattern of compliance challenges that residents should monitor closely.
Water quality score
See methodology →Is Jay, OK water safe to drink?
Jay's drinking water has significant quality concerns based on EPA testing data. With a grade of D (45/100), the system has issues across multiple categories. A water filter is recommended for all residents. The city's 4 water systems serve approximately 4,020 residents using surface water (rivers, lakes, or reservoirs).
Recent water quality updates for Jay
A timeline of significant water quality events, violations, and data updates.
Latest EPA compliance and testing data incorporated into Jay's water quality assessment. Grade: D (45/100).
Contaminants: Consumer Confidence Rule.
3 health-based. Contaminants: LEAD AND COPPER RULE REVISIONS, CARBON, TOTAL, Lead and Copper Rule.
1 health-based. Contaminants: CARBON, TOTAL, Consumer Confidence Rule.
Federal disaster declaration (FEMA DR-1754). Flood event — may have impacted local water infrastructure.
Federal disaster declaration (FEMA DR-3219). Hurricane event — may have impacted local water infrastructure.
Key contaminant findings
Based on the most recent EPA sampling data for Jay's water supply.
Well within EPA limits.
Exceeds EPA action level. Copper can leach from household plumbing — flush taps for 30 seconds before drinking.
Violation history
Jay's water system has 247 total violations on record, including 87 health-based violations. 35 remain unresolved. 25 violations were issued in the last 5 years.
Flood & environmental risk
Delaware County has experienced 4 federally declared disasters since 1974. Flooding and severe storms can overwhelm water treatment plants, cause sewage overflows, and introduce agricultural runoff, bacteria, and sediment into drinking water supplies. Local water sources include Honey Creek Near South West City, Spavinaw Creek Near Colcord, Beaty Creek Near Jay, Brush Ck At Brush Ck Rd. Nr Jay, Lake Eucha Near Eucha.
Where does Jay's water come from?
Jay's drinking water comes from surface water (rivers, lakes, or reservoirs), supplied by 4 water systems serving approximately 4,020 people. Surface water sources are more susceptible to contamination from runoff, industrial discharge, and algal blooms, requiring extensive treatment. Nearby water bodies include Honey Creek Near South West City (river), Spavinaw Creek Near Colcord (river), Beaty Creek Near Jay (river), Brush Ck At Brush Ck Rd. Nr Jay (river), Lake Eucha Near Eucha (lake).
What Jay residents can do
Recommended: NSF-certified water filter. This addresses the specific contaminants found in Jay's water.
Your water utility is required to publish an annual Consumer Confidence Report (CCR) with detailed testing results. Ask for the latest copy or check your utility's website.
Jay's area has a history of flooding. After severe weather, watch for boil water advisories from your local utility.
Data: EPA SDWIS, UCMR 5 (PFAS), FEMA, NOAA. Last updated May 2026.
Top contaminants to know
View all ↓Violation summary
Violations & advisories
Drought conditions
D1 — moderate droughtDelaware County is currently in D1 (moderate drought) per the U.S. Drought Monitor (week of May 5, 2026). Drought can elevate disinfection-byproduct (TTHM/HAA5) levels and taste/odor issues as utilities draw from lower reservoirs.
Source: U.S. Drought Monitor, updated weekly by NDMC, USDA, and NOAA.
Flood & disaster history
Delaware County has experienced 4 federally declared disasters since 1974. Flooding and severe weather can compromise water treatment infrastructure and introduce contaminants into drinking water supplies.
Recommended water filters
Based on contaminants detected in Jay's water supply, we recommend the following filter types.
Full contaminants report
| Contaminant | Detected Level | EPA Limit | Unit | Category | Status |
|---|---|---|---|---|---|
| Lead (90th percentile) LeadHeavy Metal A toxic heavy metal that can leach into drinking water from older pipes, solder, and fixtures. No amount of lead in water is considered safe. Health EffectsBrain and nervous system damage in children, kidney damage, high blood pressure, and reproductive problems in adults. EPA Limit15 ppb action level Common SourcesCorrosion of lead pipes, lead solder, brass faucets, and household plumbing. | 1.1 | 15 | ppb | Inorganic | Safe |
| Copper (90th percentile) CopperInorganic A metal that enters drinking water mainly through corrosion of copper plumbing. Small amounts are essential for health, but excess levels are harmful. Health EffectsGastrointestinal distress (nausea, vomiting, diarrhea) at short-term high levels; liver and kidney damage from long-term exposure. EPA Limit1.3 mg/L action level Common SourcesCorrosion of copper household plumbing, erosion of natural deposits. | 1.60 | 1.3 | mg/L | Inorganic | Over Limit |
Lead level trend (90th percentile)
Copper level (90th percentile)
Latest reading: 1.600 mg/L (2015)
EPA action level: 1.3 mg/L
See how Jay compares by contaminant
Explore where Jay ranks among all Oklahoma cities for specific contaminants.
Water source & infrastructure
Where Jay's water comes from
Jay's drinking water comes primarily from surface water sources such as rivers, lakes, or reservoirs.
Surface water systems require multi-stage treatment including coagulation, sedimentation, filtration, and disinfection to meet EPA Safe Drinking Water Act standards.
These sources can be impacted by seasonal changes, stormwater runoff, upstream agriculture, and industrial discharge.
The system is operated by local government ownership and serves approximately 4,020 people through 4 water systems.
Water bodies near Jay
Jay is located near 5 notable water bodies. As a surface water system, these water bodies may directly influence the city's drinking water supply.
Water systems serving Jay
| System Name | PWSID | Population | Source |
|---|---|---|---|
| JAY | OK1021674 | 2,482 | SW |
| DELAWARE CO RWD # 12 | OK2002170 | 785 | GW |
| DELAWARE CO RWD # 3 | OK1221615 | 653 | SW |
| CAAIR | OK6002161 | 100 | GW |
How Jay compares
Full Oklahoma rankings →Jay's score of 45/100 is on par with the average of 45/100 among major Oklahoma cities. It outscores 8 of 10 nearby cities.
Nearby cities
View Oklahoma rankings →About Jay, OK
Learn more about your water
Guides and resources related to Jay's water quality findings.
Explore water quality across Delaware
Frequently asked questions
Is Jay, OK tap water safe to drink?
Jay's water quality earned a grade of D (45/100). Significant issues have been found. A water filter is strongly recommended. The city ranks #313 out of 358 cities tested in Oklahoma.
What contaminants are in Jay's water?
Lead was measured at 1.1 ppb (90th percentile). 247 violations are on record.
How is Jay's water quality grade calculated?
The grade is based on four factors: violation history (40%), lead and copper levels (25%), PFAS contamination (25%), and regulatory compliance (10%). The score is also adjusted based on how complete the available data is. See our methodology page for full details.
Do I need a water filter in Jay?
Based on current data, basic filtration should suffice for additional peace of mind.
Where does Jay's water come from?
Jay's water is sourced from Surface water. The city has 4 water systems serving approximately 4,020 residents.
What health violations has Jay's water system had?
Jay has 87 health-based violations on record. The most recent violation was recorded in July 2025. Health-based violations mean the water exceeded EPA maximum contaminant levels (MCLs) for a regulated substance. 35 violations remain unresolved.
How does Jay's water compare to other cities?
Jay ranks #313 out of 358 cities in Oklahoma (better than 13% of state cities) and #14249 out of 15744 cities nationally (10th percentile). The grade of D reflects the combined assessment of violation history, lead and copper levels, PFAS contamination, and regulatory compliance.