WaterVerge

Is Hildale, UT Tap Water Safe to Drink?

Graded F — but Copper was detected above EPA limits. Here's what's in the water and how to remove it. What to do next ↓

6K residents served 1 water system PWSID: UTAH27006
Overall Score
40.2 / 100
Violations
13 active
Last Updated
May 2026
Source
Groundwater
#171 of 177 in Utah Top 96% nationally
Local Government
High data confidence
Reviewed by WaterVerge Editorial Team · Last updated May 2026
FGRADE
Water Quality Grade
40.2/100
waterverge.com
F 40.2/100

Hildale, UT — Water Quality Report

Hildale's drinking water received a grade of F (40.2 out of 100), indicating failing water quality. The city's 1 water system serves approximately 6,100 residents using groundwater.

Lead levels were measured at 1.0 ppb (90th percentile), well within EPA limits. UCMR 5 testing detected 7 PFAS compounds, with levels exceeding EPA maximum contaminant levels in the water supply.

The system has 411 violations on record, including 2 health-based violations. 13 remain unresolved.

Data last updated: May 2026 · Source: EPA SDWIS, UCMR 5
Analysis

What to know about Hildale's water

Hildale ranks #171 out of 177 cities in Utah for water quality, placing it among the lowest-rated in the state.

Hildale relies on groundwater, which is generally less vulnerable to surface contamination but can be affected by naturally occurring minerals like arsenic and nitrate, as well as agricultural and industrial runoff.

Of particular concern: PFAS "forever chemical" levels exceed the 2024 EPA maximum contaminant levels. These synthetic compounds don't break down naturally and require specialized filtration such as reverse osmosis or granular activated carbon.

Quality Breakdown

Water quality score

See methodology →
40.2 out of 100 Grade F
A: 90-100
B: 74-89
C: 60-73
F: <50
How is this calculated?
Violations
0/45
F
Historical violation record including health-based and monitoring violations.
Lead & Copper
16/20
B
Lead at 1.0 ppb (90th percentile).
Contaminants
9.2/20
D
7 PFAS compounds detected.
Compliance
10/10
A
Monitoring and reporting compliance with EPA regulations.
Source Risk
5/5
A
Water source: Groundwater.
Water Safety

Is Hildale, UT water safe to drink?

Concerns Identified

Hildale's drinking water has significant quality concerns based on EPA testing data. With a grade of F (40.2/100), the system has issues across multiple categories. A water filter is recommended for all residents. The city's 1 water system serves approximately 6,100 residents using groundwater (wells).

13
Active Violations
1.0 ppb
Lead (90th %ile)
7 compounds
PFAS Detected
4 events
Disaster History

Recent water quality updates for Hildale

A timeline of significant water quality events, violations, and data updates.

PFAS
7 PFAS "forever chemical" compounds detected

PFAS levels exceed EPA maximum contaminant levels. Reverse osmosis or activated carbon filtration recommended.

Update
Water quality data updated

Latest EPA compliance and testing data incorporated into Hildale's water quality assessment. Grade: F (40.2/100).

Violation
1 drinking water violation recorded

Contaminants: E. COLI.

Violation
1 drinking water violation recorded

Contaminants: Revised Total Coliform Rule.

Violation
1 drinking water violation recorded

Contaminants: E. COLI.

Disaster
SEVERE STORM AND FLOODING

Federal disaster declaration (FEMA DR-4088). Flood event — may have impacted local water infrastructure.

Key contaminant findings

Based on the most recent EPA sampling data for Hildale's water supply.

Lead Within Limits
Detected: 1.0 ppb Limit: 15 ppb (EPA Action Level)

Well within EPA limits.

Copper Exceeds Limit
Detected: 1.90 mg/L Limit: 1.3 mg/L (EPA Action Level)

Exceeds EPA action level. Copper can leach from household plumbing — flush taps for 30 seconds before drinking.

PFAS (7 compounds) Elevated
Detected: Highest: lithium at 71.0000 µg/L Limit: 0.004 µg/L (EPA MCL)

PFAS "forever chemicals" exceed EPA maximum contaminant levels. Reverse osmosis or granular activated carbon filtration strongly recommended.

PFAS "forever chemicals" detected

UCMR 5 testing found 7 PFAS compounds in Hildale's water supply. PFAS are synthetic chemicals that persist indefinitely in the environment and the human body.

Compound Level EPA MCL Status
lithium 71.0000 µg/L 0.004 µg/L Within Limit
PFOS 0.0260 µg/L 0.004 µg/L Over MCL
PFHxS 0.0220 µg/L 0.004 µg/L Within Limit
PFBS 0.0170 µg/L 0.004 µg/L Within Limit

Violation history

Hildale's water system has 411 total violations on record, including 2 health-based violations. 13 remain unresolved. 5 violations were issued in the last 5 years.

MRMONOtherTTMCL
Most recent violations:
Jun 2025 E. COLI Open
May 2025 Revised Total Coliform Rule Resolved
Jul 2024 E. COLI Open
Jan 2024 Total Haloacetic Acids (HAA5) Resolved
Jan 2024 TTHM Resolved

Flood & environmental risk

Washington County has experienced 4 federally declared disasters since 1989. Flooding and severe storms can overwhelm water treatment plants, cause sewage overflows, and introduce agricultural runoff, bacteria, and sediment into drinking water supplies.

SEVERE STORM AND FLOODING
Flood FEMA DR-4088
SEVERE WINTER STORM AND FLOODING
Flood FEMA DR-1955
HURRICANE KATRINA EVACUATION
Coastal Storm FEMA DR-3223

Where does Hildale's water come from?

Hildale's drinking water comes from groundwater (wells), supplied by 1 water system serving approximately 6,100 people. Groundwater is generally less susceptible to surface contamination but can contain naturally occurring contaminants like arsenic, radon, and nitrate.

What Hildale residents can do

Install a water filter

Recommended: Reverse osmosis system. This addresses the specific contaminants found in Hildale's water.

Request your utility's CCR

Your water utility is required to publish an annual Consumer Confidence Report (CCR) with detailed testing results. Ask for the latest copy or check your utility's website.

Monitor alerts during storms

Hildale's area has a history of flooding. After severe weather, watch for boil water advisories from your local utility.

Data: EPA SDWIS, UCMR 5 (PFAS), FEMA, NOAA. Last updated May 2026.

Contaminant Alerts

Top contaminants to know

View all ↓
Lead (90th percentile)
Inorganic / Heavy Metal
Safe
1.0 ppb
EPA Action Level: 15 ppb · 7% of limit
Safe Level
Copper (90th percentile)
Inorganic
Over Limit
1.90 mg/L
EPA Action Level: 1.3 mg/L · +20% over limit
Exceeds Limit
lithium
PFAS / Forever Chemical
Near MCL
71.0000 µg/L
EPA MCL: 0.004 µg/L · +20% over limit
Detected
Lithium
Inorganic
Above state screening
71.0 µg/L
State screening level: 60 µg/L · +18% over limit
DetectedNo federal MCLUCMR 5 Data (2023–2025)
PFAS Testing

Forever chemicals overview

National PFAS report →
30
Compounds tested
7
Detected
1
Exceed EPA MCL
6.50
Hazard Index
PFOS max: 0.0260 µg/L
Compliance Record

Violation summary

411
Total violations
2
Health-based
13
Active / unresolved
Jun 2025
Most recent violation
Compliance Record

Violations & advisories

411 Total
13 Active
2 Health-based
398 Resolved
2 SNC
Violations by category
Synthetic Organic Chemicals
194
Volatile Organic Chemicals
63
Inorganic Chemicals
51
Stage 1 Disinfectants and Disinfection Byproducts Rule
22
Nitrate Rule
16
Jun 2025 Active
E. COLI
Monitoring & Reporting
Monitoring & Reporting 0
Jul 2024 Active
E. COLI
Monitoring & Reporting
Monitoring & Reporting 0
May 2019 Active
E. COLI
Monitoring & Reporting
Monitoring & Reporting 0
Oct 2017 Active
Revised Total Coliform Rule
Other Violation 0
Aug 2017 Active
Revised Total Coliform Rule
Treatment Technique
Health-Based Health 0
Jul 2015 Active
Consumer Confidence Rule
Other Violation 0
Oct 2014 Active
Lead and Copper Rule
Monitoring & Reporting
Monitoring & Reporting 0
Jul 2014 Active
Consumer Confidence Rule
Other Violation 0
Oct 2011 Active
E. COLI
Monitoring & Reporting
Monitoring & Reporting 0
Jan 2010 Active
Lead and Copper Rule
Monitoring & Reporting
Monitoring & Reporting 0
Jan 2008 Active
Lead and Copper Rule
Monitoring & Reporting
Monitoring & Reporting 0
Jan 2000 Active
Lead and Copper Rule
Monitoring & Reporting
Monitoring & Reporting 0
Active
Compliance Violation
Monitoring 0
May 2025 Resolved
Revised Total Coliform Rule
Monitoring
Monitoring Resolved May 2025
Jan 2024 Resolved
Total Haloacetic Acids (HAA5)
Monitoring & Reporting
Monitoring & Reporting Resolved Dec 2024
Jan 2024 Resolved
TTHM
Monitoring & Reporting
Monitoring & Reporting Resolved Dec 2024
Jul 2018 Resolved
Revised Total Coliform Rule
Monitoring
Monitoring Resolved Jul 2018
Jul 2018 Resolved
BHC-GAMMA
Monitoring & Reporting
Monitoring & Reporting Resolved Sep 2018
Jul 2018 Resolved
Methoxychlor
Monitoring & Reporting
Monitoring & Reporting Resolved Sep 2018
Jul 2018 Resolved
Toxaphene
Monitoring & Reporting
Monitoring & Reporting Resolved Sep 2018
Showing 20 of 411 violations
Environmental Risk

Drought conditions

D2 — severe drought

Washington County is currently in D2 (severe drought) per the U.S. Drought Monitor (week of May 5, 2026). Drought can elevate disinfection-byproduct (TTHM/HAA5) levels and taste/odor issues as utilities draw from lower reservoirs.

6
Weeks at D2+ (current streak)
25.2%
Months in D2+ (last 30y)
6
Weeks at D2+ (last 5y)

Source: U.S. Drought Monitor, updated weekly by NDMC, USDA, and NOAA.

Environmental Risk

Flood & disaster history

4
Declared disasters
Nov 2012
Most recent
Flood
Most common type

Washington County has experienced 4 federally declared disasters since 1989. Flooding and severe weather can compromise water treatment infrastructure and introduce contaminants into drinking water supplies.

Nov 2012
SEVERE STORM AND FLOODING
Flood FEMA #4088
Feb 2011
SEVERE WINTER STORM AND FLOODING
Flood FEMA #1955
Sep 2005
HURRICANE KATRINA EVACUATION
Coastal Storm FEMA #3223
Jan 1989
DIKE FAILURE & FLASH FLOODING
Flood FEMA #820

Recommended water filters

Based on contaminants detected in Hildale's water supply, we recommend the following filter types.

🧪
For PFAS
Reverse Osmosis or Activated Carbon Block
PFAS compounds exceed EPA maximum contaminant levels
🔧
For Copper
Reverse Osmosis or KDF Filter
Copper exceeds the EPA action level of 1.3 mg/L

Full contaminants report

Contaminant Detected Level EPA Limit Unit Category Status
Lead (90th percentile) 1.0 15 ppb Inorganic Safe
Copper (90th percentile) 1.90 1.3 mg/L Inorganic Over Limit
11Cl-PF3OUdS ND HI µg/L PFAS Not Detected
4:2 FTS ND HI µg/L PFAS Not Detected
6:2 FTS ND HI µg/L PFAS Not Detected
8:2 FTS ND HI µg/L PFAS Not Detected
9Cl-PF3ONS ND HI µg/L PFAS Not Detected
ADONA ND HI µg/L PFAS Not Detected
HFPO-DA ND 0.01 µg/L PFAS Not Detected
lithium 71.000 HI µg/L PFAS Detected
NEtFOSAA ND HI µg/L PFAS Not Detected
NFDHA ND HI µg/L PFAS Not Detected
NMeFOSAA ND HI µg/L PFAS Not Detected
PFBA ND HI µg/L PFAS Not Detected
PFBS 0.017 HI µg/L PFAS Detected
PFDA ND HI µg/L PFAS Not Detected
PFDoA ND HI µg/L PFAS Not Detected
PFEESA ND HI µg/L PFAS Not Detected
PFHpA ND HI µg/L PFAS Not Detected
PFHpS ND HI µg/L PFAS Not Detected
PFHxA 0.012 HI µg/L PFAS Detected
PFHxS 0.022 HI µg/L PFAS Detected
PFMBA ND HI µg/L PFAS Not Detected
PFMPA ND HI µg/L PFAS Not Detected
PFNA ND HI µg/L PFAS Not Detected
PFOA ND 0.004 µg/L PFAS Not Detected
PFOS 0.026 0.004 µg/L PFAS Over MCL
PFPeA 0.004 HI µg/L PFAS Detected
PFPeS 0.013 HI µg/L PFAS Detected
PFTA ND HI µg/L PFAS Not Detected
PFTrDA ND HI µg/L PFAS Not Detected
PFUnA ND HI µg/L PFAS Not Detected
Data source: EPA SDWIS, UCMR 5, local utility CCR.

Lead level trend (90th percentile)

EPA action level: 15 ppb
Lead has decreased by 5.0 ppb from 1993 (6.0 ppb) to 2023 (1.0 ppb).

Copper level (90th percentile)

Latest reading: 1.900 mg/L (1993)

EPA action level: 1.3 mg/L

Infrastructure

Water source & infrastructure

Primary Source
Groundwater
Operator
Local Government
Population Served
6,100
Water Systems
1
Water Source

Where Hildale's water comes from

Groundwater

Hildale's drinking water is drawn from underground aquifers through wells.

Groundwater is naturally filtered through rock and soil layers, generally requiring less treatment than surface water. However, it can contain naturally occurring contaminants like arsenic, radon, and minerals.

Agricultural activity, septic systems, and industrial operations near well fields can introduce nitrates, pesticides, and volatile organic compounds.

The system is operated by local government ownership and serves approximately 6,100 people through 1 water system.

Infrastructure

Water systems serving Hildale

System Name PWSID Population Source
HILDALE - COLORADO CITY UTAH27006 6,100 GW
Regional Comparison

How Hildale compares

Full Utah rankings →

Hildale's score of 40.2/100 is below the average of 50/100 among major Utah cities. It outscores 2 of 10 nearby cities. 8 of 10 nearby cities score higher.

Hildale (this city)
40.2
Orem
40.7
Sandy
39.5
Lehi
44.9
Utah avg
50
City Profile

About Hildale, UT

Economic Profile
$65,179
Median Income
$1,083/mo
Median Rent
6.4%
Unemployment
Community
26.1
Median Age
74
People / sq mi
21.7%
College Educated
45.1%
Homeownership
Share this reportHelp others learn about their water quality
WhatsAppXFacebookLinkedInEmail

Frequently asked questions

Is Hildale, UT tap water safe to drink?

Hildale's water quality earned a grade of F (40.2/100). Significant issues have been found. A water filter is strongly recommended. The city ranks #171 out of 177 cities tested in Utah.

What contaminants are in Hildale's water?

Lead was measured at 1.0 ppb (90th percentile). 7 PFAS compounds were detected. 411 violations are on record.

How is Hildale's water quality grade calculated?

The grade is based on four factors: violation history (40%), lead and copper levels (25%), PFAS contamination (25%), and regulatory compliance (10%). The score is also adjusted based on how complete the available data is. See our methodology page for full details.

Do I need a water filter in Hildale?

PFAS compounds exceed EPA limits — a reverse osmosis or activated carbon filter is recommended.

Where does Hildale's water come from?

Hildale's water is sourced from Groundwater. The city has 1 water system serving approximately 6,100 residents.

What health violations has Hildale's water system had?

Hildale has 2 health-based violations on record. The most recent violation was recorded in June 2025. Health-based violations mean the water exceeded EPA maximum contaminant levels (MCLs) for a regulated substance. 13 violations remain unresolved.

Is Hildale's groundwater at risk of contamination?

Hildale uses groundwater, which can be affected by naturally occurring contaminants like arsenic, radon, and nitrate, as well as agricultural runoff and industrial activity. The system has 411 violations on record that may relate to groundwater quality. Groundwater systems are generally less susceptible to surface contamination but should be monitored for emerging contaminants like PFAS.

Why does Hildale have so many PFAS compounds in its water?

7 different PFAS "forever chemical" compounds were detected in Hildale's water supply during UCMR 5 testing. PFAS contamination often originates from proximity to military installations (AFFF firefighting foam), airports, industrial manufacturing sites, or wastewater treatment facilities. Some levels exceed the 2024 EPA maximum contaminant levels — a reverse osmosis or NSF-certified activated carbon filter is strongly recommended.

How does Hildale's water compare to other cities?

Hildale ranks #171 out of 177 cities in Utah (better than 3% of state cities) and #15166 out of 15744 cities nationally (4th percentile). The grade of F reflects the combined assessment of violation history, lead and copper levels, PFAS contamination, and regulatory compliance.