WaterVerge

Is Ashland, KY Tap Water Safe to Drink?

Graded C+ — but 1,4-Dioxane and Chlorate were detected above EPA limits. Here's what's in the water and how to remove it. What to do next ↓

53K residents served 2 water systems PWSID: KY0100011
Overall Score
65.7 / 100
Violations
24 active
Last Updated
May 2026
Source
Surface water
#215 of 246 in Kentucky Top 73% nationally
Local Government
High data confidence
Reviewed by WaterVerge Editorial Team · Last updated May 2026
C+GRADE
Water Quality Grade
65.7/100
waterverge.com
C+ 65.7/100

Ashland, KY — Water Quality Report

Ashland's drinking water received a grade of C+ (65.7 out of 100), indicating fair water quality. The city's 2 water systems serve approximately 53,355 residents using surface water.

Lead levels were measured at 3.0 ppb (90th percentile), well within EPA limits. UCMR 5 testing detected 4 PFAS compounds, with levels exceeding EPA maximum contaminant levels in the water supply.

The system has 135 violations on record, including 37 health-based violations. 24 remain unresolved.

Data last updated: May 2026 · Source: EPA SDWIS, UCMR 5
Analysis

What to know about Ashland's water

Ashland ranks #215 out of 246 cities in Kentucky for water quality, placing it among the lowest-rated in the state.

The city draws from surface water sources, which are more susceptible to seasonal runoff and agricultural contamination, requiring extensive multi-barrier treatment including coagulation, filtration, and disinfection.

Of particular concern: PFAS "forever chemical" levels exceed the 2024 EPA maximum contaminant levels. These synthetic compounds don't break down naturally and require specialized filtration such as reverse osmosis or granular activated carbon.

Haloacetic acid (HAA5) levels were elevated at 34.8 µg/L in UCMR 4 testing, though below the 60 µg/L EPA limit. Activated carbon filtration can help reduce these disinfection byproducts.

Hexavalent chromium (chromium-6) was detected at 0.07 µg/L in UCMR 3 testing. While below California's 10 µg/L limit and with no federal MCL set, residents sensitive to this contaminant may consider reverse osmosis filtration.

Quality Breakdown

Water quality score

See methodology →
65.7 out of 100 Grade C+
A: 90-100
B: 74-89
C: 60-73
F: <50
How is this calculated?
Violations
26/45
D
Historical violation record including health-based and monitoring violations.
Lead & Copper
20/20
A
Lead at 3.0 ppb (90th percentile).
Contaminants
7.7/20
F
4 PFAS compounds detected.
Compliance
8/10
B
Monitoring and reporting compliance with EPA regulations.
Source Risk
4/5
B
Water source: Surface water.
Water Safety

Is Ashland, KY water safe to drink?

Concerns Identified

Ashland's drinking water has significant quality concerns based on EPA testing data. With a grade of C+ (65.7/100), the system has issues across multiple categories. A water filter is recommended for all residents. The city's 2 water systems serve approximately 53,355 residents using surface water (rivers, lakes, or reservoirs).

24
Active Violations
3.0 ppb
Lead (90th %ile)
4 compounds
PFAS Detected
7 events
Disaster History

Recent water quality updates for Ashland

A timeline of significant water quality events, violations, and data updates.

PFAS
4 PFAS "forever chemical" compounds detected

PFAS levels exceed EPA maximum contaminant levels. Reverse osmosis or activated carbon filtration recommended.

Update
Water quality data updated

Latest EPA compliance and testing data incorporated into Ashland's water quality assessment. Grade: C+ (65.7/100).

Disaster
SEVERE, STORMS, FLOODING, LANDSLIDES, AND MUDSLIDES

Federal disaster declaration (FEMA DR-4595). Flood event — may have impacted local water infrastructure.

Violation
1 drinking water violation recorded

Contaminants: Revised Total Coliform Rule.

Violation
2 drinking water violations recorded

Contaminants: TTHM, Total Haloacetic Acids (HAA5).

Violation
1 drinking water violation recorded

Contaminants: Revised Total Coliform Rule.

Key contaminant findings

Based on the most recent EPA sampling data for Ashland's water supply.

Lead Within Limits
Detected: 3.0 ppb Limit: 15 ppb (EPA Action Level)

Well within EPA limits.

PFAS (4 compounds) Elevated
Detected: Highest: lithium at 22.0000 µg/L Limit: 0.004 µg/L (EPA MCL)

PFAS "forever chemicals" exceed EPA maximum contaminant levels. Reverse osmosis or granular activated carbon filtration strongly recommended.

PFAS "forever chemicals" detected

UCMR 5 testing found 4 PFAS compounds in Ashland's water supply. PFAS are synthetic chemicals that persist indefinitely in the environment and the human body.

Compound Level EPA MCL Status
lithium 22.0000 µg/L 0.004 µg/L Within Limit
PFPeA 0.0240 µg/L 0.004 µg/L Within Limit
PFOA 0.0068 µg/L 0.004 µg/L Over MCL
PFBS 0.0034 µg/L 0.004 µg/L Within Limit

Violation history

Ashland's water system has 135 total violations on record, including 37 health-based violations. 24 remain unresolved.

MONMRMCLOtherTT
Most recent violations:
Jun 2019 Revised Total Coliform Rule Resolved
Sep 2018 TTHM Resolved
Sep 2018 Total Haloacetic Acids (HAA5) Resolved
Aug 2018 Revised Total Coliform Rule Resolved
May 2018 Interim Enhanced Surface Water Treatment Rule Resolved

Flood & environmental risk

Boyd County has experienced 7 federally declared disasters since 1967. Flooding and severe storms can overwhelm water treatment plants, cause sewage overflows, and introduce agricultural runoff, bacteria, and sediment into drinking water supplies. Local water sources include Symmes Creek At Aid, Ohio River.

SEVERE, STORMS, FLOODING, LANDSLIDES, AND MUDSLIDES
Flood FEMA DR-4595
SEVERE STORMS, TORNADOES, FLOODING, LANDSLIDES, AND MUDSLIDES
Flood FEMA DR-4361
SEVERE WINTER STORM, SNOWSTORM, FLOODING, LANDSLIDES, AND MUDSLIDES
Flood FEMA DR-4218

Where does Ashland's water come from?

Ashland's drinking water comes from surface water (rivers, lakes, or reservoirs), supplied by 2 water systems serving approximately 53,355 people. Surface water sources are more susceptible to contamination from runoff, industrial discharge, and algal blooms, requiring extensive treatment. Nearby water bodies include Symmes Creek At Aid (river), Ohio River (river).

What Ashland residents can do

Install a water filter

Recommended: Reverse osmosis system. This addresses the specific contaminants found in Ashland's water.

Request your utility's CCR

Your water utility is required to publish an annual Consumer Confidence Report (CCR) with detailed testing results. Ask for the latest copy or check your utility's website.

Monitor alerts during storms

Ashland's area has a history of flooding. After severe weather, watch for boil water advisories from your local utility.

Data: EPA SDWIS, UCMR 5 (PFAS), FEMA, NOAA. Last updated May 2026.

Contaminant Alerts

Top contaminants to know

View all ↓
Lead (90th percentile)
Inorganic / Heavy Metal
Safe
3.0 ppb
EPA Action Level: 15 ppb · 20% of limit
Safe Level
lithium
PFAS / Forever Chemical
Near MCL
22.0000 µg/L
EPA MCL: 0.004 µg/L · +20% over limit
Detected
HAA5 (Disinfection Byproducts)
Disinfection Byproduct
Safe
34.8 µg/L
EPA MCL: 60 µg/L · 58% of limit
Within LimitUCMR 4 DataHAA6Br: 12.3 µg/LHAA9: 46.1 µg/L
Chromium-6 (Hexavalent Chromium)
Inorganic
Detected
0.07 µg/L
CA MCL (no federal MCL): 10 µg/L · 1% of limit
DetectedUCMR 3 Data
Strontium
Inorganic
Detected
307.0 µg/L
EPA Health Ref Level: 1,500 µg/L · 20% of limit
DetectedUCMR 3 Data
1,4-Dioxane
Organic
Over HA
0.36 µg/L
EPA Health Advisory: 0.35 µg/L · +3% over limit
Over Health AdvisoryUCMR 3 Data
Vanadium
Inorganic
Detected
0.32 µg/L
EPA Short-term HA: 21 µg/L · 2% of limit
DetectedUCMR 3 Data
Chlorate
Disinfection Byproduct
Over HA
234.0 µg/L
EPA Lifetime HA: 210 µg/L · +11% over limit
Over Health AdvisoryUCMR 3 Data
Molybdenum
Inorganic
Detected
2.46 µg/L
EPA Lifetime HA: 40 µg/L · 6% of limit
DetectedUCMR 3 Data
Lithium
Inorganic
Detected
22.0 µg/L
State screening level: 60 µg/L · 37% of limit
DetectedNo federal MCLUCMR 5 Data (2023–2025)
PFAS Testing

Forever chemicals overview

National PFAS report →
30
Compounds tested
4
Detected
1
Exceed EPA MCL
1.70
Hazard Index
PFOA max: 0.0068 µg/L
Compliance Record

Violation summary

135
Total violations
37
Health-based
24
Active / unresolved
Jun 2019
Most recent violation
Compliance Record

Violations & advisories

135 Total
24 Active
37 Health-based
111 Resolved
11 SNC
Violations by category
Stage 2 Disinfectants and Disinfection Byproducts Rule
28
Synthetic Organic Chemicals
27
Stage 1 Disinfectants and Disinfection Byproducts Rule
12
Total Coliform Rule
11
Inorganic Chemicals
11
Apr 2017 Active
TTHM
Monitoring & Reporting
Monitoring & Reporting 0
Apr 2016 Active
TTHM
Monitoring & Reporting
Monitoring & Reporting 0
Dec 2015 Active
Public Notice
Other Violation 0
Dec 2015 Active
Public Notice
Other Violation 0
Jul 2015 Active
Public Notice
Other Violation 0
Jul 2015 Active
Public Notice
Other Violation 0
Jan 2015 Active
TTHM
Monitoring & Reporting
Monitoring & Reporting 0
Jan 2015 Active
Total Haloacetic Acids (HAA5)
Monitoring & Reporting
Monitoring & Reporting 0
Jul 2014 Active
TTHM
Monitoring & Reporting
Monitoring & Reporting 0
Nov 2013 Active
Public Notice
Other Violation 0
Nov 2011 Active
Public Notice
Other Violation 0
Jul 2011 Active
Consumer Confidence Rule
Other Violation 0
Jul 2009 Active
Consumer Confidence Rule
Other Violation 0
Oct 2005 Active
Consumer Confidence Rule
Other Violation 0
Jul 2005 Active
Consumer Confidence Rule
Other Violation 0
Jul 2005 Active
Consumer Confidence Rule
Other Violation 0
Oct 2004 Active
Lead and Copper Rule
Monitoring & Reporting
Monitoring & Reporting 0
Jul 2004 Active
Consumer Confidence Rule
Other Violation 0
Jul 2004 Active
Consumer Confidence Rule
Other Violation 0
Jul 2001 Active
Consumer Confidence Rule
Other Violation 0
Showing 20 of 135 violations
Industrial pollution

Top industrial polluters within 10 miles of Ashland

Industrial polluters nearby

Reported releases to surface water by facilities near Ashland, ranked by pounds discharged annually.

Total reported releases to surface water: 39,180 lbs

FacilityTop chemicalTo surface water (lbs/yr)Distance
CATLETTSBURG REFINING LLC
Petroleum · MARATHON PETROLEUM CORP
CATLETTSBURG, KY41129
Nitrate compounds (water dissociable; reportable only when in aqueous solution)37,6996.0 mi
CALGON CARBON CORP
Chemicals · KURARAY HOLDINGS USA INC
CATLETTSBURG, KY41129
Manganese1,4817.7 mi
FEDERAL CORRECTIONAL INSTITUTION ASHLAND KY
Other · US DEPARTMENT OF JUSTICE
ASHLAND, KY41105
4.1 mi
MARATHON PETROLEUM CO - BIG SANDY ASPHALT TERMINAL
Petroleum · MARATHON PETROLEUM CORP
CATLETTSBURG, KY41129
9.9 mi
VESUVIUS USA - WURTLAND PLANT
Nonmetallic Mineral Product · VESUVIUS USA CORP
WURTLAND, KY41144
9.2 mi

Source: EPA Toxic Release Inventory (TRI) 2023

Site context

Superfund sites within 10 miles of Ashland

Superfund sites nearby

Federally tracked hazardous-waste sites on the EPA National Priorities List. Proximity does not necessarily indicate tap-water contamination — the connection depends on hydrology and treatment.

Source: EPA Superfund National Priorities List

Environmental Risk

Drought conditions

D1 — moderate drought

Boyd County is currently in D1 (moderate drought) per the U.S. Drought Monitor (week of May 5, 2026). Drought can elevate disinfection-byproduct (TTHM/HAA5) levels and taste/odor issues as utilities draw from lower reservoirs.

6.2%
Months in D2+ (last 30y)

Source: U.S. Drought Monitor, updated weekly by NDMC, USDA, and NOAA.

Environmental Risk

Flood & disaster history

7
Declared disasters
Apr 2021
Most recent
Flood
Most common type

Boyd County has experienced 7 federally declared disasters since 1967. Flooding and severe weather can compromise water treatment infrastructure and introduce contaminants into drinking water supplies.

Apr 2021
SEVERE, STORMS, FLOODING, LANDSLIDES, AND MUDSLIDES
Flood FEMA #4595
Apr 2018
SEVERE STORMS, TORNADOES, FLOODING, LANDSLIDES, AND MUDSLIDES
Flood FEMA #4361
May 2015
SEVERE WINTER STORM, SNOWSTORM, FLOODING, LANDSLIDES, AND MUDSLIDES
Flood FEMA #4218
Sep 2005
HURRICANE KATRINA
Hurricane FEMA #3231
Jan 1991
SEVERE STORMS & FLOODING
Flood FEMA #893
Feb 1989
SEVERE STORMS & FLOODING
Flood FEMA #821

Recommended water filters

Based on contaminants detected in Ashland's water supply, we recommend the following filter types.

🧪
For PFAS
Reverse Osmosis or Activated Carbon Block
PFAS compounds exceed EPA maximum contaminant levels

Full contaminants report

Contaminant Detected Level EPA Limit Unit Category Status
Lead (90th percentile) 3.0 15 ppb Inorganic Safe
11Cl-PF3OUdS ND HI µg/L PFAS Not Detected
4:2 FTS ND HI µg/L PFAS Not Detected
6:2 FTS ND HI µg/L PFAS Not Detected
8:2 FTS ND HI µg/L PFAS Not Detected
9Cl-PF3ONS ND HI µg/L PFAS Not Detected
ADONA ND HI µg/L PFAS Not Detected
HFPO-DA ND 0.01 µg/L PFAS Not Detected
lithium 22.000 HI µg/L PFAS Detected
NEtFOSAA ND HI µg/L PFAS Not Detected
NFDHA ND HI µg/L PFAS Not Detected
NMeFOSAA ND HI µg/L PFAS Not Detected
PFBA ND HI µg/L PFAS Not Detected
PFBS 0.003 HI µg/L PFAS Detected
PFDA ND HI µg/L PFAS Not Detected
PFDoA ND HI µg/L PFAS Not Detected
PFEESA ND HI µg/L PFAS Not Detected
PFHpA ND HI µg/L PFAS Not Detected
PFHpS ND HI µg/L PFAS Not Detected
PFHxA ND HI µg/L PFAS Not Detected
PFHxS ND HI µg/L PFAS Not Detected
PFMBA ND HI µg/L PFAS Not Detected
PFMPA ND HI µg/L PFAS Not Detected
PFNA ND HI µg/L PFAS Not Detected
PFOA 0.007 0.004 µg/L PFAS Over MCL
PFOS ND 0.004 µg/L PFAS Not Detected
PFPeA 0.024 HI µg/L PFAS Detected
PFPeS ND HI µg/L PFAS Not Detected
PFTA ND HI µg/L PFAS Not Detected
PFTrDA ND HI µg/L PFAS Not Detected
PFUnA ND HI µg/L PFAS Not Detected
Data source: EPA SDWIS, UCMR 5, local utility CCR.

Lead level trend (90th percentile)

EPA action level: 15 ppb
Lead has increased by 2.4 ppb from 1992 (0.6 ppb) to 2024 (3.0 ppb).
Infrastructure

Water source & infrastructure

Primary Source
Surface Water
Operator
Local Government
Population Served
53,355
Water Systems
2
Source breakdown
Surface Water
1
Purchased Surface Water
1
Water Source

Where Ashland's water comes from

Surface Water

Ashland's drinking water comes primarily from surface water sources such as rivers, lakes, or reservoirs.

Surface water systems require multi-stage treatment including coagulation, sedimentation, filtration, and disinfection to meet EPA Safe Drinking Water Act standards.

These sources can be impacted by seasonal changes, stormwater runoff, upstream agriculture, and industrial discharge.

The system is operated by local government ownership and serves approximately 53,355 people through 2 water systems.

Local Hydrology

Water bodies near Ashland

Ashland is located near 2 notable water bodies. As a surface water system, these water bodies may directly influence the city's drinking water supply.

Symmes Creek At Aid
river
Ohio River
river
Infrastructure

Water systems serving Ashland

System Name PWSID Population Source
ASHLAND WATER WORKS KY0100011 44,402 SW
CANNONSBURG WATER DISTRICT KY0100064 8,953 SWP
Regional Comparison

How Ashland compares

Full Kentucky rankings →

Ashland's score of 65.7/100 is below the average of 80/100 among major Kentucky cities. 10 of 10 nearby cities score higher.

Ashland (this city)
65.7
Louisville
82.2
Ft. Thomas
86.8
Owensboro
85.1
Kentucky avg
80
City Profile

About Ashland, KY

Wikipedia →

Ashland is a city in Boyd County, Kentucky, United States. It is located on the southern bank of the Ohio River at the state border with Ohio and near West Virginia. The population was 21,625 at the 2020 census, making it the most populous city in Boyd County. It is a principal city of the Huntington–Ashland metropolitan area, referred to locally as the "Tri-State area" and home to 376,155 residents in 2020. Ashland serves as an important economic and medical center for northeastern Kentucky. Ashland is a home-rule class city under Kentucky law.

Share this reportHelp others learn about their water quality
WhatsAppXFacebookLinkedInEmail

Frequently asked questions

Is Ashland, KY tap water safe to drink?

Ashland's water quality earned a grade of C+ (65.7/100). Some concerns have been identified. Consider a water filter for an extra layer of protection. The city ranks #215 out of 246 cities tested in Kentucky.

What contaminants are in Ashland's water?

Lead was measured at 3.0 ppb (90th percentile). 4 PFAS compounds were detected. 135 violations are on record.

How is Ashland's water quality grade calculated?

The grade is based on four factors: violation history (40%), lead and copper levels (25%), PFAS contamination (25%), and regulatory compliance (10%). The score is also adjusted based on how complete the available data is. See our methodology page for full details.

Do I need a water filter in Ashland?

PFAS compounds exceed EPA limits — a reverse osmosis or activated carbon filter is recommended.

Where does Ashland's water come from?

Ashland's water is sourced from Surface water. The city has 2 water systems serving approximately 53,355 residents.

What health violations has Ashland's water system had?

Ashland has 37 health-based violations on record. The most recent violation was recorded in June 2019. Health-based violations mean the water exceeded EPA maximum contaminant levels (MCLs) for a regulated substance. 24 violations remain unresolved.

Why does Ashland have so many PFAS compounds in its water?

4 different PFAS "forever chemical" compounds were detected in Ashland's water supply during UCMR 5 testing. PFAS contamination often originates from proximity to military installations (AFFF firefighting foam), airports, industrial manufacturing sites, or wastewater treatment facilities. Some levels exceed the 2024 EPA maximum contaminant levels — a reverse osmosis or NSF-certified activated carbon filter is strongly recommended.

How does Ashland's water compare to other cities?

Ashland ranks #215 out of 246 cities in Kentucky (better than 13% of state cities) and #11466 out of 15744 cities nationally (27th percentile). The grade of C+ reflects the combined assessment of violation history, lead and copper levels, PFAS contamination, and regulatory compliance.