WaterVerge

Is Albany, OR Tap Water Safe to Drink?

Graded F — but Copper and Chlorate were detected above EPA limits. Here's what's in the water and how to remove it. What to do next ↓

62K residents served 12 water systems PWSID: OR4100012
Overall Score
42.6 / 100
Violations
93 active
Last Updated
May 2026
Source
Surface water
#184 of 213 in Oregon Top 94% nationally
Local Government
High data confidence
Reviewed by WaterVerge Editorial Team · Last updated May 2026
FGRADE
Water Quality Grade
42.6/100
waterverge.com
F 42.6/100

Albany, OR — Water Quality Report

Albany's drinking water received a grade of F (42.6 out of 100), indicating failing water quality. The city's 12 water systems serve approximately 61,950 residents using surface water.

Lead levels were measured at 2.0 ppb (90th percentile), well within EPA limits. PFAS testing under UCMR 5 found no detectable forever chemicals.

The system has 921 violations on record, including 35 health-based violations. 93 remain unresolved.

Data last updated: May 2026 · Source: EPA SDWIS, UCMR 5
Analysis

What to know about Albany's water

Albany ranks #184 out of 213 cities in Oregon for water quality, placing it among the lowest-rated in the state.

The city draws from surface water sources, which are more susceptible to seasonal runoff and agricultural contamination, requiring extensive multi-barrier treatment including coagulation, filtration, and disinfection.

Hexavalent chromium (chromium-6) was detected at 0.06 µg/L in UCMR 3 testing. While below California's 10 µg/L limit and with no federal MCL set, residents sensitive to this contaminant may consider reverse osmosis filtration.

The system has seen 48 violations in the past five years, suggesting a pattern of compliance challenges that residents should monitor closely.

Quality Breakdown

Water quality score

See methodology →
42.6 out of 100 Grade F
A: 90-100
B: 74-89
C: 60-73
F: <50
How is this calculated?
Violations
0/45
F
Historical violation record including health-based and monitoring violations.
Lead & Copper
16/20
B
Lead at 2.0 ppb (90th percentile).
Contaminants
14.6/20
C
No PFAS compounds detected.
Compliance
8/10
B
Monitoring and reporting compliance with EPA regulations.
Source Risk
4/5
B
Water source: Surface water.
Water Safety

Is Albany, OR water safe to drink?

Concerns Identified

Albany's drinking water has significant quality concerns based on EPA testing data. With a grade of F (42.6/100), the system has issues across multiple categories. A water filter is recommended for all residents. The city's 12 water systems serve approximately 61,950 residents using surface water (rivers, lakes, or reservoirs).

93
Active Violations
2.0 ppb
Lead (90th %ile)
None
PFAS Detected
6 events
Disaster History

Recent water quality updates for Albany

A timeline of significant water quality events, violations, and data updates.

Update
Water quality data updated

Latest EPA compliance and testing data incorporated into Albany's water quality assessment. Grade: F (42.6/100).

Violation
5 drinking water violations recorded

1 health-based. Contaminants: Revised Total Coliform Rule, Lead and Copper Rule, Consumer Confidence Rule.

Violation
11 drinking water violations recorded

1 health-based. Contaminants: Lead and Copper Rule, Consumer Confidence Rule.

Violation
1 drinking water violation recorded

Contaminants: Public Notice.

Disaster
SEVERE STORMS, FLOODING, LANDSLIDES, AND MUDSLIDES

Federal disaster declaration (FEMA DR-4452). Flood event — may have impacted local water infrastructure.

Disaster
SEVERE WINTER STORM, FLOODING, LANDSLIDES, AND MUDSLIDES

Federal disaster declaration (FEMA DR-4055). Flood event — may have impacted local water infrastructure.

Key contaminant findings

Based on the most recent EPA sampling data for Albany's water supply.

Lead Within Limits
Detected: 2.0 ppb Limit: 15 ppb (EPA Action Level)

Well within EPA limits.

Copper Exceeds Limit
Detected: 1.71 mg/L Limit: 1.3 mg/L (EPA Action Level)

Exceeds EPA action level. Copper can leach from household plumbing — flush taps for 30 seconds before drinking.

Violation history

Albany's water system has 921 total violations on record, including 35 health-based violations. 93 remain unresolved. 48 violations were issued in the last 5 years.

TTMROtherMONMCL
Most recent violations:
Oct 2025 Revised Total Coliform Rule Open
Oct 2025 Lead and Copper Rule Open
Oct 2025 Consumer Confidence Rule Open
Oct 2025 Nitrate Resolved
Oct 2025 Nitrate Resolved

Flood & environmental risk

Linn County has experienced 6 federally declared disasters since 1964. Flooding and severe storms can overwhelm water treatment plants, cause sewage overflows, and introduce agricultural runoff, bacteria, and sediment into drinking water supplies. Local water sources include Calapooia River, Willamette River, North Santiam R, Santiam River, Luckiamute River.

SEVERE STORMS, FLOODING, LANDSLIDES, AND MUDSLIDES
Flood FEMA DR-4452
SEVERE WINTER STORM, FLOODING, LANDSLIDES, AND MUDSLIDES
Flood FEMA DR-4055
HURRICANE KATRINA EVACUATION
Coastal Storm FEMA DR-3228

Where does Albany's water come from?

Albany's drinking water comes from surface water (rivers, lakes, or reservoirs), supplied by 12 water systems serving approximately 61,950 people. Surface water sources are more susceptible to contamination from runoff, industrial discharge, and algal blooms, requiring extensive treatment. Nearby water bodies include Calapooia River (river), Willamette River (river), North Santiam R (river), Santiam River (river), Luckiamute River (river).

What Albany residents can do

Install a water filter

Recommended: NSF-certified water filter. This addresses the specific contaminants found in Albany's water.

Request your utility's CCR

Your water utility is required to publish an annual Consumer Confidence Report (CCR) with detailed testing results. Ask for the latest copy or check your utility's website.

Monitor alerts during storms

Albany's area has a history of flooding. After severe weather, watch for boil water advisories from your local utility.

Data: EPA SDWIS, UCMR 5 (PFAS), FEMA, NOAA. Last updated May 2026.

Contaminant Alerts

Top contaminants to know

View all ↓
Lead (90th percentile)
Inorganic / Heavy Metal
Safe
2.0 ppb
EPA Action Level: 15 ppb · 13% of limit
Safe Level
Copper (90th percentile)
Inorganic
Over Limit
1.71 mg/L
EPA Action Level: 1.3 mg/L · +20% over limit
Exceeds Limit
HAA5 (Disinfection Byproducts)
Disinfection Byproduct
Safe
21.8 µg/L
EPA MCL: 60 µg/L · 36% of limit
Within LimitUCMR 4 DataHAA6Br: 1.2 µg/LHAA9: 23.0 µg/L
Chromium-6 (Hexavalent Chromium)
Inorganic
Detected
0.06 µg/L
CA MCL (no federal MCL): 10 µg/L · 1% of limit
DetectedUCMR 3 Data
Strontium
Inorganic
Detected
33.0 µg/L
EPA Health Ref Level: 1,500 µg/L · 2% of limit
DetectedUCMR 3 Data
Manganese
Inorganic
Detected
23.0 µg/L
EPA Secondary MCL: 50 µg/L · 46% of limit
DetectedUCMR 4 Data
Vanadium
Inorganic
Detected
0.69 µg/L
EPA Short-term HA: 21 µg/L · 3% of limit
DetectedUCMR 3 Data
Chlorate
Disinfection Byproduct
Over HA
330.0 µg/L
EPA Lifetime HA: 210 µg/L · +20% over limit
Over Health AdvisoryUCMR 3 Data
PFAS Testing

Forever chemicals overview

National PFAS report →
30
Compounds tested
0
Detected
0
Exceed EPA MCL
Compliance Record

Violation summary

921
Total violations
35
Health-based
93
Active / unresolved
Oct 2025
Most recent violation
Compliance Record

Violations & advisories

921 Total
93 Active
35 Health-based
828 Resolved
Violations by category
Synthetic Organic Chemicals
327
Volatile Organic Chemicals
230
Total Coliform Rule
136
Consumer Confidence Rule
45
Lead and Copper Rule
35
Oct 2025 Active
Revised Total Coliform Rule
Treatment Technique
Health-Based Health 0
Oct 2025 Active
Lead and Copper Rule
Monitoring & Reporting
Monitoring & Reporting 0
Oct 2025 Active
Consumer Confidence Rule
Other Violation 0
Jul 2025 Active
Lead and Copper Rule
Monitoring & Reporting
Monitoring & Reporting 0
Jul 2025 Active
Lead and Copper Rule
Monitoring & Reporting
Monitoring & Reporting 0
Jul 2025 Active
Lead and Copper Rule
Monitoring & Reporting
Monitoring & Reporting 0
Jul 2025 Active
Lead and Copper Rule
Monitoring & Reporting
Monitoring & Reporting 0
Jul 2025 Active
Lead and Copper Rule
Monitoring & Reporting
Monitoring & Reporting 0
Jul 2025 Active
Consumer Confidence Rule
Other Violation 0
Jul 2025 Active
Consumer Confidence Rule
Other Violation 0
Jul 2025 Active
Consumer Confidence Rule
Other Violation 0
Jul 2025 Active
Consumer Confidence Rule
Other Violation 0
Jul 2025 Active
Consumer Confidence Rule
Other Violation 0
Jun 2025 Active
Public Notice
Other Violation 0
Jan 2025 Active
Lead and Copper Rule
Monitoring & Reporting
Monitoring & Reporting 0
Jan 2025 Active
Lead and Copper Rule
Monitoring & Reporting
Monitoring & Reporting 0
Oct 2024 Active
Consumer Confidence Rule
Other Violation 0
Oct 2024 Active
Consumer Confidence Rule
Other Violation 0
Oct 2024 Active
Consumer Confidence Rule
Other Violation 0
Jul 2024 Active
Consumer Confidence Rule
Other Violation 0
Showing 20 of 921 violations
Industrial pollution

Top industrial polluters within 10 miles of Albany

Industrial polluters nearby

Reported releases to surface water by facilities near Albany, ranked by pounds discharged annually.

Total reported releases to surface water: 244 lbs

FacilityTop chemicalTo surface water (lbs/yr)Distance
ATI SPECIALTY ALLOYS & COMPONENTS LLC
Primary Metals · ATI INC
ALBANY, OR97321
Nitrate compounds (water dissociable; reportable only when in aqueous solution)2112.5 mi
HOLLINGSWORTH & VOSE FIBER CO
Nonmetallic Mineral Product · HOLLINGSWORTH & VOSE CO
CORVALLIS, OR97333
Barium And Barium Compounds239.5 mi
BAKELITE CHEMICALS LLC
Chemicals · BAKELITE US HOLDCO INC
ALBANY, OR97321
Ammonia103.1 mi
ARAUCO N.A. INC. - DURAFLAKE PARTICLEBOARD
Wood Products · ARAUCO NORTH AMERICA INC
ALBANY, OR97321
3.2 mi
CLAYTON ALBANY
Wood Products · BERKSHIRE HATHAWAY INC
ALBANY, OR97321
1.0 mi

Source: EPA Toxic Release Inventory (TRI) 2023

Site context

Superfund sites within 10 miles of Albany

Superfund sites nearby

Federally tracked hazardous-waste sites on the EPA National Priorities List. Proximity does not necessarily indicate tap-water contamination — the connection depends on hydrology and treatment.

Source: EPA Superfund National Priorities List

Environmental Risk

Drought conditions

D2 — severe drought

Linn County is currently in D2 (severe drought) per the U.S. Drought Monitor (week of May 5, 2026). Drought can elevate disinfection-byproduct (TTHM/HAA5) levels and taste/odor issues as utilities draw from lower reservoirs.

7
Weeks at D2+ (current streak)
27.3%
Months in D2+ (last 30y)
7
Weeks at D2+ (last 5y)

Source: U.S. Drought Monitor, updated weekly by NDMC, USDA, and NOAA.

Environmental Risk

Flood & disaster history

6
Declared disasters
Jul 2019
Most recent
Flood
Most common type

Linn County has experienced 6 federally declared disasters since 1964. Flooding and severe weather can compromise water treatment infrastructure and introduce contaminants into drinking water supplies.

Jul 2019
SEVERE STORMS, FLOODING, LANDSLIDES, AND MUDSLIDES
Flood FEMA #4452
Mar 2012
SEVERE WINTER STORM, FLOODING, LANDSLIDES, AND MUDSLIDES
Flood FEMA #4055
Sep 2005
HURRICANE KATRINA EVACUATION
Coastal Storm FEMA #3228
Feb 1996
HIGH WINDS, SEVERE STORMS AND FLOODING
Flood FEMA #1099
Jan 1972
SEVERE STORMS & FLOODING
Flood FEMA #319
Dec 1964
HEAVY RAINS & FLOODING
Flood FEMA #184

Recommended water filters

Based on contaminants detected in Albany's water supply, we recommend the following filter types.

🔧
For Copper
Reverse Osmosis or KDF Filter
Copper exceeds the EPA action level of 1.3 mg/L

Full contaminants report

Contaminant Detected Level EPA Limit Unit Category Status
Lead (90th percentile) 2.0 15 ppb Inorganic Safe
Copper (90th percentile) 1.71 1.3 mg/L Inorganic Over Limit
11Cl-PF3OUdS ND HI µg/L PFAS Not Detected
4:2 FTS ND HI µg/L PFAS Not Detected
6:2 FTS ND HI µg/L PFAS Not Detected
8:2 FTS ND HI µg/L PFAS Not Detected
9Cl-PF3ONS ND HI µg/L PFAS Not Detected
ADONA ND HI µg/L PFAS Not Detected
HFPO-DA ND 0.01 µg/L PFAS Not Detected
lithium ND HI µg/L PFAS Not Detected
NEtFOSAA ND HI µg/L PFAS Not Detected
NFDHA ND HI µg/L PFAS Not Detected
NMeFOSAA ND HI µg/L PFAS Not Detected
PFBA ND HI µg/L PFAS Not Detected
PFBS ND HI µg/L PFAS Not Detected
PFDA ND HI µg/L PFAS Not Detected
PFDoA ND HI µg/L PFAS Not Detected
PFEESA ND HI µg/L PFAS Not Detected
PFHpA ND HI µg/L PFAS Not Detected
PFHpS ND HI µg/L PFAS Not Detected
PFHxA ND HI µg/L PFAS Not Detected
PFHxS ND HI µg/L PFAS Not Detected
PFMBA ND HI µg/L PFAS Not Detected
PFMPA ND HI µg/L PFAS Not Detected
PFNA ND HI µg/L PFAS Not Detected
PFOA ND 0.004 µg/L PFAS Not Detected
PFOS ND 0.004 µg/L PFAS Not Detected
PFPeA ND HI µg/L PFAS Not Detected
PFPeS ND HI µg/L PFAS Not Detected
PFTA ND HI µg/L PFAS Not Detected
PFTrDA ND HI µg/L PFAS Not Detected
PFUnA ND HI µg/L PFAS Not Detected
Data source: EPA SDWIS, UCMR 5, local utility CCR.

Lead level trend (90th percentile)

EPA action level: 15 ppb
Lead has decreased by 5.0 ppb from 1992 (7.0 ppb) to 2027 (2.0 ppb).

Copper level trend (90th percentile)

EPA action level: 1.3 mg/L
Copper has decreased by 1.389 mg/L from 1993 (3.102 mg/L) to 2022 (1.713 mg/L).
Infrastructure

Water source & infrastructure

Primary Source
Surface Water
Operator
Local Government
Population Served
61,950
Water Systems
12
Source breakdown
Groundwater
10
Surface Water
1
Purchased Surface Water
1
Water Source

Where Albany's water comes from

Surface Water

Albany's drinking water comes primarily from surface water sources such as rivers, lakes, or reservoirs.

Surface water systems require multi-stage treatment including coagulation, sedimentation, filtration, and disinfection to meet EPA Safe Drinking Water Act standards.

These sources can be impacted by seasonal changes, stormwater runoff, upstream agriculture, and industrial discharge.

The system is operated by local government ownership and serves approximately 61,950 people through 12 water systems.

Local Hydrology

Water bodies near Albany

Albany is located near 5 notable water bodies. As a surface water system, these water bodies may directly influence the city's drinking water supply.

Calapooia River
river
Willamette River
river
North Santiam R
river
Santiam River
river
Luckiamute River
river
Infrastructure

Water systems serving Albany

System Name PWSID Population Source
ALBANY, CITY OF OR4100012 57,997 SW
CITY OF MILLERSBURG OR4101533 2,615 SWP
SCRAVEL HILL WATER CO-OP OR4100018 300 GW
FIR VIEW WATER COMPANY OR4100023 150 GW
CAMELOT MOBILE HOME PARK OR4100027 150 GW
OAKVILLA MOBILE HOME PARK OR4100028 140 GW
ALBANY TRAILER AND RV PARK, LLC OR4100004 130 GW
REDWOOD WATER SERVICE INC OR4100020 125 GW
GRAND PRAIRIE WATER SUPPLY CO OR4100024 110 GW
AMIGO VILLA WATER SERVICE INC OR4100013 100 GW
HAFEZ WATER SYSTEM OR4100025 78 GW
OAKWOOD WATER SYSTEM INC OR4100037 55 GW
Regional Comparison

How Albany compares

Full Oregon rankings →

Albany's score of 42.6/100 is on par with the average of 42/100 among major Oregon cities. It outscores 7 of 10 nearby cities.

Albany (this city)
42.6
Portland
39.4
Beaverton
40.7
Salem
43.6
Eugene
28
Bend
41
Oregon avg
42
City Profile

About Albany, OR

Wikipedia →

Albany is a city in and the county seat of Linn County, Oregon and is the 11th most populous city in the state. Albany is located in the Willamette Valley at the confluence of the Calapooia River and the Willamette River in both Linn and Benton counties, just east of Corvallis and south of Salem. It is predominantly a farming and manufacturing city that settlers founded around 1848. As of the 2020 United States census, the population of Albany, Oregon was 56,472.

Economic Profile
$69,777
Median Income
$320,071
Median Home Value
$1,194/mo
Median Rent
6.7%
Unemployment
Community
36.5
Median Age
1,232
People / sq mi
28.3%
College Educated
60.2%
Homeownership
Share this reportHelp others learn about their water quality
WhatsAppXFacebookLinkedInEmail

Frequently asked questions

Is Albany, OR tap water safe to drink?

Albany's water quality earned a grade of F (42.6/100). Significant issues have been found. A water filter is strongly recommended. The city ranks #184 out of 213 cities tested in Oregon.

What contaminants are in Albany's water?

Lead was measured at 2.0 ppb (90th percentile). No PFAS compounds were detected. 921 violations are on record.

How is Albany's water quality grade calculated?

The grade is based on four factors: violation history (40%), lead and copper levels (25%), PFAS contamination (25%), and regulatory compliance (10%). The score is also adjusted based on how complete the available data is. See our methodology page for full details.

Do I need a water filter in Albany?

Based on current data, basic filtration should suffice for additional peace of mind.

Where does Albany's water come from?

Albany's water is sourced from Surface water. The city has 12 water systems serving approximately 61,950 residents.

What health violations has Albany's water system had?

Albany has 35 health-based violations on record. The most recent violation was recorded in October 2025. Health-based violations mean the water exceeded EPA maximum contaminant levels (MCLs) for a regulated substance. 93 violations remain unresolved.

How does Albany's water compare to other cities?

Albany ranks #184 out of 213 cities in Oregon (better than 14% of state cities) and #14766 out of 15744 cities nationally (6th percentile). The grade of F reflects the combined assessment of violation history, lead and copper levels, PFAS contamination, and regulatory compliance.