Is Albany, MN Tap Water Safe to Drink?
Graded B+ — but Copper was detected above EPA limits. Here's what's in the water and how to remove it. What to do next ↓
80.5/100
waterverge.com Albany, MN — Water Quality Report
Albany's drinking water received a grade of B+ (80.5 out of 100), indicating good water quality. The city's 2 water systems serve approximately 2,909 residents using groundwater.
Lead levels were measured at 0.0 ppb (90th percentile), well within EPA limits. This system has not yet been tested for PFAS under the EPA UCMR 5 program.
The system has 12 violations on record, including 2 health-based violations. 6 remain unresolved.
What to know about Albany's water
Albany ranks #417 out of 466 cities in Minnesota for water quality, placing it among the lowest-rated in the state.
Albany relies on groundwater, which is generally less vulnerable to surface contamination but can be affected by naturally occurring minerals like arsenic and nitrate, as well as agricultural and industrial runoff.
Hexavalent chromium (chromium-6) was detected at 0.20 µg/L in UCMR 3 testing. While below California's 10 µg/L limit and with no federal MCL set, residents sensitive to this contaminant may consider reverse osmosis filtration.
As a small community water system, Albany may have fewer resources for advanced treatment technologies and infrastructure upgrades compared to larger utilities.
Water quality score
See methodology →Is Albany, MN water safe to drink?
Albany's drinking water has significant quality concerns based on EPA testing data. With a grade of B+ (80.5/100), the system has issues across multiple categories. A water filter is recommended for all residents. The city's 2 water systems serve approximately 2,909 residents using groundwater (wells).
Recent water quality updates for Albany
A timeline of significant water quality events, violations, and data updates.
Latest EPA compliance and testing data incorporated into Albany's water quality assessment. Grade: B+ (80.5/100).
Contaminants: LEAD AND COPPER RULE REVISIONS.
1 health-based. Contaminants: Nitrate.
Contaminants: Lead and Copper Rule.
Federal disaster declaration (FEMA DR-3242). Hurricane event — may have impacted local water infrastructure.
Federal disaster declaration (FEMA DR-1370). Flood event — may have impacted local water infrastructure.
Key contaminant findings
Based on the most recent EPA sampling data for Albany's water supply.
Well within EPA limits.
Exceeds EPA action level. Copper can leach from household plumbing — flush taps for 30 seconds before drinking.
Violation history
Albany's water system has 12 total violations on record, including 2 health-based violations. 6 remain unresolved. 2 violations were issued in the last 5 years.
Flood & environmental risk
Stearns County has experienced 6 federally declared disasters since 1965. Flooding and severe storms can overwhelm water treatment plants, cause sewage overflows, and introduce agricultural runoff, bacteria, and sediment into drinking water supplies.
Where does Albany's water come from?
Albany's drinking water comes from groundwater (wells), supplied by 2 water systems serving approximately 2,909 people. Groundwater is generally less susceptible to surface contamination but can contain naturally occurring contaminants like arsenic, radon, and nitrate.
What Albany residents can do
Recommended: NSF-certified water filter. This addresses the specific contaminants found in Albany's water.
Your water utility is required to publish an annual Consumer Confidence Report (CCR) with detailed testing results. Ask for the latest copy or check your utility's website.
Albany's area has a history of flooding. After severe weather, watch for boil water advisories from your local utility.
Data: EPA SDWIS, UCMR 5 (PFAS), FEMA, NOAA. Last updated May 2026.
Top contaminants to know
View all ↓Violation summary
Violations & advisories
Top industrial polluters within 10 miles of Albany
Industrial polluters nearby
Reported releases to surface water by facilities near Albany, ranked by pounds discharged annually.
| Facility | Top chemical | To surface water (lbs/yr) | Distance |
|---|---|---|---|
KERRY INC ALBANY, MN56307 | — | — | 0.5 mi |
WELLS CONCRETE PRODUCTS - ALBANY ALBANY, MN56307 | — | — | 0.6 mi |
COLUMBIA GEAR CORP AVON, MN56310 | — | — | 6.0 mi |
NOVAE LLC- MIDSOTA MFG. AVON, MN56310 | — | — | 5.7 mi |
Source: EPA Toxic Release Inventory (TRI) 2023
Flood & disaster history
Stearns County has experienced 6 federally declared disasters since 1965. Flooding and severe weather can compromise water treatment infrastructure and introduce contaminants into drinking water supplies.
Recommended water filters
Based on contaminants detected in Albany's water supply, we recommend the following filter types.
Full contaminants report
| Contaminant | Detected Level | EPA Limit | Unit | Category | Status |
|---|---|---|---|---|---|
| Lead (90th percentile) LeadHeavy Metal A toxic heavy metal that can leach into drinking water from older pipes, solder, and fixtures. No amount of lead in water is considered safe. Health EffectsBrain and nervous system damage in children, kidney damage, high blood pressure, and reproductive problems in adults. EPA Limit15 ppb action level Common SourcesCorrosion of lead pipes, lead solder, brass faucets, and household plumbing. | 0.0 | 15 | ppb | Inorganic | Safe |
| Copper (90th percentile) CopperInorganic A metal that enters drinking water mainly through corrosion of copper plumbing. Small amounts are essential for health, but excess levels are harmful. Health EffectsGastrointestinal distress (nausea, vomiting, diarrhea) at short-term high levels; liver and kidney damage from long-term exposure. EPA Limit1.3 mg/L action level Common SourcesCorrosion of copper household plumbing, erosion of natural deposits. | 1.63 | 1.3 | mg/L | Inorganic | Over Limit |
Lead level trend (90th percentile)
Copper level (90th percentile)
Latest reading: 1.626 mg/L (1993)
EPA action level: 1.3 mg/L
See how Albany compares by contaminant
Explore where Albany ranks among all Minnesota cities for specific contaminants.
Water source & infrastructure
Where Albany's water comes from
Albany's drinking water is drawn from underground aquifers through wells.
Groundwater is naturally filtered through rock and soil layers, generally requiring less treatment than surface water. However, it can contain naturally occurring contaminants like arsenic, radon, and minerals.
Agricultural activity, septic systems, and industrial operations near well fields can introduce nitrates, pesticides, and volatile organic compounds.
The system is operated by local government ownership and serves approximately 2,909 people through 2 water systems.
Water systems serving Albany
| System Name | PWSID | Population | Source |
|---|---|---|---|
| Albany | MN1730001 | 2,805 | GW |
| Roscoe | MN1730043 | 104 | GW |
How Albany compares
Full Minnesota rankings →Albany's score of 80.5/100 is on par with the average of 82/100 among major Minnesota cities. It outscores 3 of 10 nearby cities. 6 of 10 nearby cities score higher.
Nearby cities
View Minnesota rankings →About Albany, MN
Learn more about your water
Guides and resources related to Albany's water quality findings.
Explore water quality across Stearns
Frequently asked questions
Is Albany, MN tap water safe to drink?
Albany's water quality earned a grade of B+ (80.5/100). The water generally meets EPA standards and is considered safe for consumption. The city ranks #417 out of 466 cities tested in Minnesota.
What contaminants are in Albany's water?
Lead was measured at 0.0 ppb (90th percentile). 12 violations are on record.
How is Albany's water quality grade calculated?
The grade is based on four factors: violation history (40%), lead and copper levels (25%), PFAS contamination (25%), and regulatory compliance (10%). The score is also adjusted based on how complete the available data is. See our methodology page for full details.
Do I need a water filter in Albany?
Based on current data, basic filtration should suffice for additional peace of mind.
Where does Albany's water come from?
Albany's water is sourced from Groundwater. The city has 2 water systems serving approximately 2,909 residents.
What health violations has Albany's water system had?
Albany has 2 health-based violations on record. The most recent violation was recorded in July 2025. Health-based violations mean the water exceeded EPA maximum contaminant levels (MCLs) for a regulated substance. 6 violations remain unresolved.
Is Albany's groundwater at risk of contamination?
Albany uses groundwater, which can be affected by naturally occurring contaminants like arsenic, radon, and nitrate, as well as agricultural runoff and industrial activity. The system has 12 violations on record that may relate to groundwater quality. Groundwater systems are generally less susceptible to surface contamination but should be monitored for emerging contaminants like PFAS.
How does Albany's water compare to other cities?
Albany ranks #417 out of 466 cities in Minnesota (better than 11% of state cities) and #7835 out of 15744 cities nationally (50th percentile). The grade of B+ reflects the combined assessment of violation history, lead and copper levels, PFAS contamination, and regulatory compliance.